List of ISO Standard

luca/ May 27, 2017/ Wiki-Inspections

List of International Organization for Standardization standards

This is a list of published[Note 1] International Organization for Standardization (ISO) standards and other deliverables.[Note 2] For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.[1]

The standards are protected by copyright and most of them must be purchased. However about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC1) have been made freely and publicly available.[2]

ISO 1 – ISO 99

  • ISO 1:2016 Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties
  • ISO 2:1973 Textiles – Designation of the direction of twist in yarns and related products
  • ISO 3:1973 Preferred numbers – Series of preferred numbers
  • ISO 4:1997 Information and documentation – Rules for the abbreviation of title words and titles of publications
  • ISO 5 Photography and graphic technology – Density measurements
  • ISO 6:1993 Photography – Black-and-white pictorial still camera negative film/process systems – Determination of ISO speed
  • ISO 7 Pipe threads where pressure-tight joints are made on the threads
  • ISO 8:1977 Documentation – Presentation of periodicals
  • ISO 9:1995 Information and documentation – Transliteration of Cyrillic characters into Latin characters – Slavic and non-Slavic languages
  • ISO 11:1987 Aircraft – Ground pressure testing connections for pressure cabins
  • ISO 12:1987 Aerospace – Pipelines – Identification
  • ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering – Dimensions, tolerances and verification
  • ISO 15:2017 Rolling bearings – Radial bearings – Boundary dimensions, general plan
  • ISO 16:1975 Acoustics – Standard tuning frequency (Standard musical pitch)
  • ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers
  • ISO 18:1981 Documentation – Contents list of periodicals
  • :1985 Shipbuilding – Inland navigation – Cable-lifters for stud-link anchor chains
  • ISO 22:1991 Belt drives – Flat transmission belts and corresponding pulleys – Dimensions and tolerances
  • ISO 23:1993 Cinematography—Camera usage of 35 mm motion-picture film—Specifications
  • ISO 25:1994 Cinematography—Camera usage of 16 mm motion-picture film—Specifications
  • ISO 26:1993 Cinematography—Projector usage of 16 mm motion-picture films for direct front projection—Specifications
  • ISO 28:1976 Cinematography—Camera usage of 8 mm Type R motion-picture film—Specifications
  • ISO 29:1980 Cinematography—Projector usage of 8 mm Type R silent motion-picture film for direct front projection—Specifications [Withdrawn without replacement]
  • ISO 31 Quantities and units [withdrawn: replaced with ISO/IEC 80000]
  • ISO 32:1977 Gas cylinders for medical use—Marking for identification of content
  • ISO 34 Rubber, vulcanized or thermoplastic—Determination of tear strength
    • ISO 34-1:2015 Part 1: Trouser, angle and crescent test pieces
    • ISO 34-2:2015 Part 2: Small (Delft) test pieces
  • ISO 35:2004 Natural rubber latex concentrate—Determination of mechanical stability
  • ISO 36:2017 Rubber, vulcanized or thermoplastic—Determination of adhesion to textile fabrics
  • ISO 37:2011 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
  • ISO 41:1980 Shipbuilding—Inland vessels—Covers for deck openings for pumps [withdrawn without replacement]
  • ISO 43:2016 Aircraft—Jacking pads
  • ISO 44:1975 Aerospace—Lever-operated, two-position, ON/OFF switches—Directions of operation
  • ISO 45:1990 Aircraft—Pressure refuelling connections
  • ISO 46:1973 Aircraft—Fuel nozzle grounding plugs and sockets
  • ISO 48:2010 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD)
  • ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1
  • ISO 50:1977 Metal pipes—Steel sockets screwed according to ISO 7 [Withdrawn without replacement]
  • ISO 53:1998 Cylindrical gears for general and heavy engineering—Standard basic rack tooth profile
  • ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering—Modules
  • ISO 55:1977 Seedlac—Specification [Withdrawn without replacement]
  • ISO 57:1975 Bleached lac—Specification [Withdrawn without replacement]
  • ISO 60:1977 Plastics—Determination of apparent density of material that can be poured from a specified funnel
  • ISO 61:1976 Plastics—Determination of apparent density of moulding material that cannot be poured from a specified funnel
  • ISO 62:2008 Plastics—Determination of water absorption
  • ISO 63:1975 Flat transmission belts—Lengths [Withdrawn: Replaced with ISO 22]
  • ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1
  • ISO 67:1981 Muscovite mica blocks, thins and films—Grading by size [Withdrawn without replacement]
  • ISO 68 ISO general-purpose screw threads – Basic profile
    • ISO 68-1:1998 Part 1: Metric screw threads
    • ISO 68-2:1998 Part 2: Inch screw threads
  • ISO 69:1998 Cinematography—16 mm motion-picture and magnetic film—Cutting and perforating dimensions
  • ISO 70:1981 Cinematography—35 mm negative photographic sound record on 35 mm motion-picture film—Position and maximum width dimensions
  • ISO 71:2014 Cinematography—16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film—Positions and dimensions
  • ISO 74:1976 Cinematography—Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film—Positions and dimensions
  • ISO 75 Plastics—Determination of temperature of deflection under load
    • ISO 75-1:2013 Part 1: General test method
    • ISO 75-2:2013 Part 2: Plastics and ebonite
    • ISO 75-3:2004 Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
  • ISO 76:2006 Rolling bearings—Static load ratings
  • ISO 78 Chemistry — Layouts for standards[Note 3]
    • ISO 78-2:1999 Part 2: Methods of chemical analysis
    • ISO 78-3:1983 Part 3: Standard for molecular absorption spectrometry [Withdrawn without replacement]
    • ISO 78-4:1983 Part 4: Standard for atomic absorption spectrometric analysis [Withdrawn without replacement]
  • ISO/TR 79:2015 Reference materials - Examples of reference materials for qualitative properties
  • ISO 82:1974 Steel—Tensile testing [Withdrawn: replaced with ISO 6892-1]
  • ISO 83:1976 Steel—Charpy impact test (U-notch) [Withdrawn: replaced with ISO 148-1]
  • ISO 86:1974 Steel—Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick [Withdrawn: replaced with ISO 6892-1]
  • ISO 89:1974 Steel—Tensile testing of wire [Withdrawn: replaced with ISO 6892-1]
  • ISO 90 Light gauge metal containers—Definitions and determination of dimensions and capacities
    • ISO 90-1:1997 Part 1: Open-top cans
    • ISO 90-2:1997 Part 2: General use containers
    • ISO 90-3:2000 Part 3: Aerosol cans
  • ISO 91 Petroleum measurement tables [Withdrawn: replaced with ISO 91:2017]
    • ISO 91-1:1992 Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F
    • ISO 91-2:1991 Part 2: Tables based on a reference temperature of 20 degrees C
  • ISO 91:2017 Petroleum and related products - Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions
  • ISO 92:1976 Textile machinery and accessories—Spinning machinery—Definition of side (left or right)
  • ISO 93 Textile machinery and accessories—Cylindrical sliver cans
    • ISO 93-1:2006 Part 1: Main dimensions
    • ISO 93-2:2006 Part 2: Spring bottoms
  • ISO 94:1982 Textile machinery and accessories—Spindle gauges for ring-spinning and ring-doubling frames
  • ISO 96 Textile machinery and accessories—Rings and travellers for ring spinning and ring twisting frames
    • ISO 96-1:2016 Part 1: Flange rings T and SF and their travellers
    • ISO 96-2:2009 Part 2: HZ- and J-rings and their travellers
  • ISO 97:1975 Textile machinery and accessories—Rings for spinning, doubling and twisting for ear-shaped travellers [Withdrawn: replaced with ISO 96-2]
  • ISO 98:2001 Textile machinery and accessories—Spinning preparatory and spinning machinery—Main dimensions of coverings for top rollers

ISO 100 – ISO 199

  • ISO 100:1984 Pulleys for flat transmission belts—Crowns [Withdrawn: replaced with ISO 22]
  • ISO 102:1990 Aircraft—Gravity filling orifices
  • ISO 104:2015 Rolling bearings—Thrust bearings—Boundary dimensions, general plan
  • ISO 105 Textiles — Tests for colour fastness
    • ISO 105-A01:2010 Part A01: General principles of testing
    • ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour
    • ISO 105-A03:1993 Part A03: Grey scale for assessing staining
    • ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
    • ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating
    • ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour
    • ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement
    • ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques
    • ISO 105-B01:2014 Part B01: Colour fastness to light: Daylight
    • ISO 105-B02:2014 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
    • ISO 105-B03:1994 Part B03: Colour fastness to weathering: Outdoor exposure
    • ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
    • ISO 105-B05:1993 Part B05: Detection and assessment of photochromism
    • ISO 105-B06:1998 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
    • ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspiration
    • ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7
    • ISO 105-B10:2011 Part B10: Artificial weathering—Exposure to filtered xenon-arc radiation
    • ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering
    • ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textiles
    • ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator
    • ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering—Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator
    • ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda
    • ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering
    • ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene solvent
    • ISO 105-D02:2016 Part D02: Colour fastness to rubbing: Organic solvents
    • ISO 105-E01:2013 Part E01: Colour fastness to water
    • ISO 105-E02:2013 Part E02: Colour fastness to sea water
    • ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water)
    • ISO 105-E04:2013 Part E04: Colour fastness to perspiration
    • ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid
    • ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali
    • ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water
    • ISO 105-E08:1994 Part E08: Colour fastness to hot water
    • ISO 105-E09:2010 Part E09: Colour fastness to potting
    • ISO 105-E10:1994 Part E10: Colour fastness to decatizing
    • ISO 105-E11:1994 Part E11: Colour fastness to steaming
    • ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling
    • ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe
    • ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild
    • ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics
    • ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric
    • ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics
    • ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric
    • ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric
    • ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric
    • ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric
    • ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric
    • ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth
    • ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre
    • ISO 105-G01:2016 Part G01: Colour fastness to nitrogen oxides
    • ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes
    • ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere
    • ISO 105-G04:2016 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities
    • ISO 105-J01:1997 Part J01: General principles for measurement of surface colour
    • ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness
    • ISO 105-J03:2009 Part J03: Calculation of colour differences
    • ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02)
    • ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite
    • ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide
    • ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
    • ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
    • ISO 105-N05:1993 Part N05: Colour fastness to stoving
    • ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing)
    • ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating
    • ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air
    • ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride
    • ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam
    • ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride
    • ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid
    • ISO 105-X04:1994 Part X04: Colour fastness to mercerizing
    • ISO 105-X05:1994 Part X05: Colour fastness to organic solvents
    • ISO 105-X06:1994 Part X06: Colour fastness to soda boiling
    • ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool
    • ISO 105-X08:1994 Part X08: Colour fastness to degumming
    • ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde
    • ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings
    • ISO 105-X11:1994 Part X11: Colour fastness to hot pressing
    • ISO 105-X12:2016 Part X12: Colour fastness to rubbing
    • ISO 105-X13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting
    • ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate
    • ISO 105-X16:2016 Part X16: Colour fastness to rubbing—Small areas
    • ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materials
    • ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium salts
    • ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and copper
    • ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres
    • ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes
    • ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes
    • ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration
    • ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyes
    • ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes
    • ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes
    • ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution
    • ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions
  • ISO 108:1976 Textile machinery and accessories—Weaving looms—Definition of left and right sides
  • ISO 109:1982 Textile machinery—Working widths of weaving machines
  • ISO 110:1978 Textile machinery and accessories—Cones for yarn winding (cross wound) – Half angle of the cone 9 degrees 15' [Withdrawn without replacement]
  • ISO 111:1978 Textile machinery and accessories—Cones for yarn winding (cross wound) – Half angle of the cone 4 degrees 20' [Withdrawn: Replaced with ISO 8489-3]
  • ISO 112:1983 Textile machinery and accessories—Cones for yarn winding (cross wound) – Half angle of the cone 3 degrees 30' [Withdrawn: Replaced with ISO 8489-2]
  • ISO 113:2010 Rolling bearings—Plummer block housings—Boundary dimensions
  • ISO 114:1980 99.8 Unalloyed magnesium ingots—Chemical composition [Withdrawn: Replaced by ISO 8287]
  • ISO 115:2003 Unalloyed aluminium ingots for remelting—Classification and composition
  • ISO 119:1977 Plastics—Phenol-formaldehyde mouldings—Determination of free phenols—Iodometric method
  • ISO 120:1977 Plastics—Phenol-formaldehyde mouldings—Determination of free ammonia and ammonium compounds—Colorimetric comparison method
  • ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings—Chemical composition and mechanical properties of sand cast reference test bars [Withdrawn: replaced by ISO 16220]
  • ISO 123:2001 Rubber latex—Sampling
  • ISO 124:2014 Latex, rubber—Determination of total solids content
  • ISO 125:2011 Natural rubber latex concentrate—Determination of alkalinity
  • ISO 126:2005 Natural rubber latex concentrate—Determination of dry rubber content
  • ISO 127:2012 Rubber, natural latex concentrate—Determination of KOH number
  • ISO 128 Technical product documentation (TPD)—General principles of presentation[Note 3]
  • ISO 129 Technical product documentation (TPD)—Indication of dimensions and tolerances[Note 3]
    • ISO 129-1:2004 Part 1: General principles
    • ISO 129-4:2013 Part 4: Dimensioning of shipbuilding drawings
  • ISO 131:1979 Acoustics—Expression of physical and subjective magnitudes of sound or noise in air [Withdrawn without replacement]
  • ISO 132:2017 Rubber, vulcanized or thermoplastic—Determination of flex cracking and crack growth (De Mattia)
  • ISO 133:1983 Rubber, vulcanized—Determination of crack growth (De Mattia) [Withdrawn: Replaced with ISO 132]
  • ISO 136:1972 Steel—Simple torsion testing of wire [Withdrawn replaced by ISO 7800]
  • ISO 137:2015 Wool—Determination of fibre diameter—Projection microscope method
  • ISO 139:2005 Textiles—Standard atmospheres for conditioning and testing
  • ISO 140 Acoustics—Measurement of sound insulation in buildings and of building elements
    • ISO 140-2:1991 Part 2: Determination, verification and application of precision data [Withdrawn: replaced by ISO 12999-1:2014]
    • ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms [Withdrawn: replaced by ISO 16283-1:2014]
    • ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of façade elements and façades [Withdrawn: replaced by ISO 16283-1:2014]
    • ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors [Withdrawn: replaced by ISO 16283-1:2014]
    • ISO 140-14:2004 Part 14: Guidelines for special situations in the field [Withdrawn: replaced by ISO 16283-1:2014]
      • ISO 140-14:2004/Cor 1:2007
    • ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on building elements [Withdrawn: replaced by ISO 10140-1:2016]
  • ISO 141:1976 Textile machinery and accessories—Pirn winders and cross winders—Definition of left and right sides
  • ISO 142:1976 Textile machinery and accessories—Weaving preparatory machines—Definition of left and right sides
  • ISO 143:1977 Textile machinery and accessories—Weft pirns for automatic looms [Withdrawn without replacement]
  • ISO 144:1973 Steel—Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]
  • ISO 146:1984 Metallic materials—Hardness test—Verification of Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn replaced with ISO 6507-2]
    • ISO 146-2:1993 Metallic materials—Verification of Vickers hardness testing machines—Part 2: Less than HV 0,2 [Withdrawn replaced with ISO 6507-2]
  • ISO 148 Metallic materials—Charpy pendulum impact test
    • ISO 148-1:2016 Part 1: Test method
    • ISO 148-2:2016 Part 2: Verification of testing machines
    • ISO 148-3:2016 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
  • ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes—Specifications and methods of test
  • ISO 155:1998 Belt drives—Pulleys—Limiting values for adjustment of centres
  • ISO 156:1982 Metallic materials—Hardness test—Verification of Brinell hardness testing machines [Withdrawn replaced by ISO 6506-2]
  • ISO 157:1996 Coal—Determination of forms of sulfur
  • ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without replacement]
  • ISO 161 Thermoplastics pipes for the conveyance of fluids—Nominal outside diameters and nominal pressures
    • ISO 161-1:1996 Part 1: Metric series
    • ISO 161-2:1996 Part 2: Inch-based series
  • ISO 162:1985 Cinematography—Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture—Positions and width dimensions
  • ISO 171:1980 Plastics—Determination of bulk factor of moulding materials
  • ISO 172:1978 Plastics—Phenol-formaldehyde mouldings—Detection of free ammonia
  • ISO 174:1974 Plastics—Homopolymer and copolymer resins of vinyl chloride—Determination of viscosity number in dilute solution [Withdrawn replaced by ISO 1628-2]
  • ISO 175:2010 Plastics—Methods of test for the determination of the effects of immersion in liquid chemicals
  • ISO 176:2005 Plastics—Determination of loss of plasticizers—Activated carbon method
  • ISO 177:2016 Plastics—Determination of migration of plasticizers
  • ISO 178:2010 Plastics—Determination of flexural properties
  • ISO 179 Plastics—Determination of Charpy impact properties
    • ISO 179-1:2010 Part 1: Non-instrumented impact test
    • ISO 179-2:1997 Part 2: Instrumented impact test
  • ISO 180:2000 Plastics—Determination of Izod impact strength
  • ISO 182 Plastics—Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures
    • ISO 182-1:1990 Part 1: Congo red method
    • ISO 182-2:1990 Part 2: pH method
    • ISO 182-3:1993 Part 3: Conductometric method
    • ISO 182-4:1993 Part 4: Potentiometric method
  • ISO 185:2005 Grey cast irons - Classification
  • ISO 186:2002 Paper and board - Sampling to determine average quality
  • ISO 187:1990 Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
  • ISO 188:2011 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
  • ISO 196:1978 Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test
  • ISO 197 Copper and copper alloys - Terms and definitions
    • ISO 197-1:1983 Part 1: Materials
    • ISO 197-2:1983 Part 2: Unwrought products (Refinery shapes)
    • ISO 197-3:1983 Part 3: Wrought products
    • ISO 197-4:1983 Part 4: Castings
    • ISO 197-5:1980 Part 5: Methods of processing and treatment
  • ISO 199:2014 Rolling bearings - Thrust bearings - Geometrical product specification (GPS) and tolerance values

ISO 200 – ISO 999

  • ISO 204:2009 Metallic materials - Uniaxial creep testing in tension - Method of test
  • ISO 209:2007 Aluminium and aluminium alloys - Chemical composition
  • ISO/TS 211:2014 Essential oils - General rules for labelling and marking of containers
  • ISO 212:2007 Essential oils - Sampling
  • ISO 214:1976 Documentation - Abstracts for publications and documentation
  • ISO 215:1986 Documentation - Presentation of contributions to periodicals and other serials
  • ISO 216:2007 Writing paper and certain classes of printed matter – Trimmed sizes – A and B series, and indication of machine direction
  • ISO 217:2013 Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction
  • ISO 225:2010 Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions
  • ISO 226:2003 Acoustics – Normal equal-loudness-level contours
  • ISO 228 Pipe threads where pressure-tight joints are not made on the threads
  • ISO 229:1973 Machine tools - Speeds and feeds
  • ISO 230 Test code for machine tools
    • ISO 230-1:2012 Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
    • ISO 230-2:2014 Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
    • ISO 230-3:2007 Part 3: Determination of thermal effects
    • ISO 230-4:2005 Part 4: Circular tests for numerically controlled machine tools
    • ISO 230-5:2000 Part 5: Determination of the noise emission
    • ISO 230-6:2002 Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
    • ISO 230-7:2015 Part 7: Geometric accuracy of axes of rotation
    • ISO/TR 230-8:2010 Part 8: Vibrations
    • ISO/TR 230-9:2005 Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
    • ISO 230-10:2016 Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
  • ISO 233 Information and documentation – Transliteration of Arabic characters into Latin characters[Note 3]
  • ISO 234 Files and rasps
    • ISO 234-1:1983 Part 1: Dimensions
    • ISO 234-2:1982 Part 2: Characteristics of cut
  • ISO 235:2016 Parallel shank jobber and stub series drills and Morse taper shank drills
  • ISO 236 Reamers[Note 3]
    • ISO 236-1:1976 Hand reamers
    • ISO 236-2:2013 Part 2: Long fluted machine reamers with Morse taper shanks
  • ISO 237:1975 Rotating tools with parallel shanks - Diameters of shanks and sizes of driving squares
  • ISO 238:2016 Reduction sleeves and extension sockets for tools with Morse taper shanks
  • ISO 239:1999 Drill chuck tapers
  • ISO 240:2016 Milling cutters - Interchangeability dimensions for cutter arbors or cutter mandrels
  • ISO 241:1994 Shanks for turning and planing tools - Shapes and dimensions of the section
  • ISO 242:2014 Carbide tips for brazing on turning tools
  • ISO 243:2014 Turning tools with carbide tips - External tools
  • ISO 244:1979 Aircraft - Sealing wire
  • ISO 245:1998 Aerospace - Lockwire - Diameters
  • ISO 246:2007 Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions
  • ISO 247:2006 Rubber - Determination of ash
  • ISO 248 Rubber, raw - Determination of volatile-matter content
    • ISO 248-1:2011 Part 1: Hot-mill method and oven method
    • ISO 248-2:2012 Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
  • ISO 249:2016 Rubber, raw natural - Determination of dirt content
  • ISO 251:2012 Conveyor belts with textile carcass - Widths and lengths
  • ISO 252:2007 Conveyor belts - Adhesion between constitutive elements - Test methods
  • ISO 254:2011 Belt drives - Pulleys - Quality, finish and balance
  • ISO 255:1990 Belt drives - Pulleys for V-belts (system based on datum width) - Geometrical inspection of grooves
  • ISO 257:2004 Pesticides and other agrochemicals - Principles for the selection of common names
  • ISO 259 Information and documentation – Transliteration of Hebrew characters into Latin characters[Note 3]
  • ISO 261:1998 ISO general purpose metric screw threads – General plan
  • ISO 262:1998 ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts
  • ISO 263:1973 ISO inch screw threads - General plan and selection for screws, bolts and nuts - Diameter range 0,06 to 6&nsbp;in
  • ISO 265 Pipes and fittings of plastics materials - Fittings for domestic and industrial waste pipes - Basic dimensions: Metric series
    • ISO 265-1:1988 Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
  • ISO 266:1997 Acoustics - Preferred frequencies
  • ISO 268:1980 Aircraft - Mechanical and electromechanical indicators - General requirements
  • ISO 269:1985 Correspondence envelopes - Designation and sizes [Withdrawn without replacement]
  • ISO 272:1982 Fasteners - Hexagon products - Widths across flats
  • ISO 273:1979 Fasteners - Clearance holes for bolts and screws
  • ISO 276:2002 Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test
  • ISO 277:2002 Binders for paints and varnishes - Raw tung oil - Requirements and methods of test
  • ISO 279:1998 Essential oils - Determination of relative density at 20 degrees C - Reference method
  • ISO 280:1998 Essential oils - Determination of refractive index
  • ISO 281:2007 Rolling bearings - Dynamic load ratings and rating life
  • ISO 282:1992 Conveyor belts - Sampling
  • ISO 283:2015 Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method
  • ISO 284:2012 Conveyor belts - Electrical conductivity - Specification and test method
  • ISO 286 Geometrical product specifications (GPS) – ISO code system for tolerances on linear sizes
    • :2010 Part 1: Basis of tolerances, deviations and fits
    • :2010 Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
  • ISO 287:2009 Paper and board - Determination of moisture content of a lot - Oven-drying method
  • ISO 289 Rubber, unvulcanized - Determinations using a shearing-disc viscometer
    • ISO 289-1:2015 Part 1: Determination of Mooney viscosity
    • ISO 289-2:2016 Part 2: Determination of pre-vulcanization characteristics
    • ISO 289-3:2015 Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR
    • ISO 289-4:2003 Part 4: Determination of the Mooney stress-relaxation rate
  • ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing
  • ISO 293:2004 Plastics - Compression moulding of test specimens of thermoplastic materials
  • ISO 294 Plastics - Injection moulding of test specimens of thermoplastic materials
    • ISO 294-1:2017 Part 1: General principles, and moulding of multipurpose and bar test specimens
    • ISO 294-2:1996 Part 2: Small tensile bars
    • ISO 294-3:2002 Part 3: Small plates
    • ISO 294-4:2001 Part 4: Determination of moulding shrinkage
    • ISO 294-5:2011 Part 5: Preparation of standard specimens for investigating anisotropy
  • ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
  • ISO 296:1991 Machine tools - Self-holding tapers for tool shanks
  • ISO 297:1988 7/24 tapers for tool shanks for manual changing
  • ISO 298:1973 Machine tools - Lathe centres - Sizes for interchangeability
  • ISO 299:1987 Machine tool tables - T-slots and corresponding bolts
  • ISO 302:2015 Pulps - Determination of Kappa number
  • ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
  • ISO 361:1975 Basic ionizing radiation symbol
  • ISO 362 Measurement of noise emitted by accelerating road vehicles – Engineering method
    • ISO 362-1:2015 Part 1: M and N categories
    • ISO 362-2:2009 Part 2: L category
    • ISO 362-3:2016 Part 3: Indoor testing M and N categories
  • ISO 369:2009 Machine tools - Symbols for indications appearing on machine tools
  • ISO 374 Protective gloves against dangerous chemicals and micro-organisms
    • ISO 374-1:2016 Part 1: Terminology and performance requirements for chemical risks
    • ISO 374-5:2016 Part 5: Terminology and performance requirements for micro-organisms risks
  • ISO 384:2015 Laboratory glass and plastics ware – Principles of design and construction of volumetric instruments
  • ISO 385:2005 Laboratory glassware – Burettes
  • ISO 386:1977 Liquid-in-glass laboratory thermometers – Principles of design, construction and use
  • ISO 387:1977 Hydrometers – Principles of construction and adjustment
  • ISO 407:2004 Small medical gas cylinders – Pin-index yoke-type valve connections
  • ISO 428:1983 Wrought copper-aluminium alloys - Chemical composition and forms of wrought products [Withdrawn without replacement]
  • ISO 445:2013 Pallets for materials handling – Vocabulary
  • ISO 463:2006 Geometrical Product Specifications (GPS) – Dimensional measuring equipment – Design and metrological characteristics of mechanical dial gauges
  • ISO 472:2013 Plastics – Vocabulary
  • ISO 476:1982 Textile machinery and accessories – Pirn winding machines – Vocabulary
  • ISO 477:1982 Textile machinery and accessories – Cone and cheese winding machines – Vocabulary
  • ISO 497:1973 Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers
  • ISO 500 Agricultural tractors – Rear-mounted power take-off types 1, 2 and 3
  • ISO 518:2006 Photography – Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units – Specification
  • ISO 519:1992 Photography – Hand-held cameras – Flash-connector dimensions
  • ISO 532 Acoustics – Methods for calculating loudness
    • ISO 532-1:2017 Part 1: Zwicker method
    • ISO 532-2:2017 Part 2: Moore-Glasberg method
  • ISO 536:2012 Paper and board – Determination of grammage
  • ISO 561:1989 Coal preparation plant - Graphical symbols
  • ISO/TR 581:2005 Weldability - Metallic materials - General principles
  • ISO 611:2003 Road vehicles – Braking of automotive vehicles and their trailers – Vocabulary
  • ISO 612:1978 Road vehicles – Dimensions of motor vehicles and towed vehicles – Terms and definitions
  • ISO 633:2007 Cork – Vocabulary
  • ISO 639 Codes for the representation of names of languages
    • ISO 639-1:2002 Part 1: Alpha-2 code
    • ISO 639-2:1998 Part 2: Alpha-3 code
    • ISO 639-3:2007 Part 3: Alpha-3 code for comprehensive coverage of languages
    • ISO 639-4:2010 Part 4: General principles of coding of the representation of names of languages and related entities, and application guidelines
    • ISO 639-5:2008 Part 5: Alpha-3 code for language families and groups
    • ISO 639-6:2009 Part 6: Alpha-4 code for comprehensive coverage of language variants [Withdrawn, no replacement]
  • ISO/IEC 646:1991 Information technology – ISO 7-bit coded character set for information interchange
  • ISO 648:2008 Laboratory glassware – Single-volume pipettes
  • ISO 649 Laboratory glassware – Density hydrometers for general purposes
    • ISO 649-1:1981 Part 1: Specification
    • ISO 649-2:1981 Part 2: Test methods and use
  • ISO 650:1977 Relative density 60/60 degrees F hydrometers for general purposes
  • ISO 651:1975 Solid-stem calorimeter thermometers
  • ISO 652:1975 Enclosed-scale calorimeter thermometers
  • ISO 653:1980 Long solid-stem thermometers for precision use
  • ISO 654:1980 Short solid-stem thermometers for precision use
  • ISO 655:1980 Long enclosed-scale thermometers for precision use
  • ISO 656:1980 Short enclosed-scale thermometers for precision use
  • ISO 657 Hot-rolled steel sections
  • ISO 663:2017 Animal and vegetable fats and oils - Determination of insoluble impurities content
  • ISO 668 Series 1 freight containers – Classification, dimensions and ratings
  • ISO 676:1995 Spices and condiments – Botanical nomenclature
  • ISO 690:2010 Information and documentation – Guidelines for bibliographic references and citations to information resources
  • ISO 701:1998 International gear notation - Symbols for geometrical data
  • ISO 704:2009 Terminology work – Principles and methods
  • ISO 710 Graphical symbols for use on detailed maps, plans and geological cross-sections
    • ISO 710-1:1974 Part 1: General rules of representation
    • ISO 710-2:1974 Part 2: Representation of sedimentary rocks
    • ISO 710-3:1974 Part 3: Representation of magmatic rocks
    • ISO 710-4:1982 Part 4: Representation of metamorphic rocks
    • ISO 710-5:1989 Part 5: Representation of minerals
    • ISO 710-6:1984 Part 6: Representation of contact rocks and rocks which have undergone metasomatic, pneumatolytic or hydrothermal transformation or transformation by weathering
    • ISO 710-7:1984 Part 7: Tectonic symbols
  • ISO 732 Photography – 120-size and 220-size films – Dimensions
  • ISO 748:2007 Hydrometry – Measurement of liquid flow in open channels using current-meters or floats
  • ISO 760:1978 Determination of water - Karl Fischer method (General method)
  • ISO 764 Horology – Magnetic resistant watches
  • ISO 772:2011 Hydrometry - Vocabulary and symbols
  • ISO 780:2015 Packaging - Distribution packaging - Graphical symbols for handling and storage of packages
  • ISO 787 General methods of test for pigments and extenders
    • ISO 787-9:1981 Determination of pH value of an aqueous suspension
  • ISO 830:1999 Freight containers – Vocabulary
  • ISO 832:1994 Information and documentation - Bibliographic description and references - Rules for the abbreviation of bibliographic terms
  • ISO 835:2007 Laboratory glassware – Graduated pipettes
  • ISO 836:2001 Terminology for refractories
  • ISO 838:1974 Paper – Holes for general filing purposes – Specifications
  • ISO 843:1997 Information and documentation – Conversion of Greek characters into Latin characters
  • ISO 846:1997 Plastics – Evaluation of the action of microorganisms
  • ISO 857 Welding and allied processes - Vocabulary
    • ISO 857-2:2005 Part 2: Soldering and brazing processes and related terms
  • ISO 860:2007 Terminology work – Harmonization of concepts and terms
  • ISO 862:1984 Surface active agents – Vocabulary
  • ISO 898 Mechanical properties of fasteners made of carbon steel and alloy steel[Note 3]
  • Spices and condiments - Determination of total ash
  • Meat and meat products - Determination of total ash
  • ISO 962:1974 Information processing - Implementation of the 7- bit coded character set and its 7- bit and 8-bit extensions on 9- track 12,7 mm (0.5 in) magnetic tape
  • ISO 965 ISO general purpose metric screw threads – Tolerances
  • ISO 999:1996 Information and documentation – Guidelines for the content, organization, and presentation of indexes

ISO 1000 – ISO 4999

  • ISO 1000 SI units and recommendations for the use of their multiples and of certain other units [withdrawn 2009-11-17]
  • ISO/IEC 1001:2012 Information technology – File structure and labelling of magnetic tapes for information interchange
  • ISO 1004 Information processing – Magnetic ink character recognition – Print specifications
    • ISO 1004-1:2013 Part 1: Print specifications for E13B
    • ISO 1004-2:2013 Part 2: Print specifications for CMC7
  • ISO 1007 Photography – 135-size film and magazine – Specifications
  • ISO 1031:1974 Coniferous sawn timber – Defects – Terms and definitions
  • ISO 1032:1974 Coniferous sawn timber – Sizes – Terms and definitions
  • ISO 1034:1973 Aircraft - Ground air-conditioning connections
  • ISO 1042:1998 Laboratory glassware – One-mark volumetric flasks
  • ISO 1069:1973 Magnetic compasses and binnacles for sea navigation – Vocabulary
  • ISO 1070:1992 Liquid flow measurement in open channels – Slope-area method
  • ISO 1073 Alphanumeric character sets for optical recognition
    • ISO 1073-1:1976 Part 1: Character set OCR-A - Shapes and dimensions of the printed image
    • ISO 1073-2:1976 Part 2: Character set OCR-B - Shapes and dimensions of the printed image
  • ISO 1081:2013 Belt drives - V-belts and V-ribbed belts, and corresponding grooved pulleys - Vocabulary
  • ISO 1086:1991 Information and documentation – Title leaves of books
  • ISO 1087 Terminology work - Vocabulary
    • ISO 1087-1:2000 Part 1: Theory and application
  • ISO 1088:2007 Hydrometry – Velocity-area methods using current-meters – Collection and processing of data for determination of uncertainties in flow measurement
  • :2017 Geometrical product specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out
  • ISO 1100 Hydrometry – Measurement of liquid flow in open channels
    • ISO 1100-2:2010 Part 2: Determination of the stage-discharge relationship
  • ISO 1107:2017 Fishing nets – Netting – Basic terms and definitions
  • ISO 1112:2009 Horology – Functional and non-functional jewels
  • ISO 1113:1979 Information processing - Representation of the 7- bit coded character set on punched tape
  • ISO 1119:2011 Geometrical product specifications (GPS) - Series of conical tapers and taper angles
  • ISO 1122 Vocabulary of gear terms
    • ISO 1122-1:1998 Part 1: Definitions related to geometry
    • ISO 1122-2:1999 Part 2: Definitions related to worm gear geometry
  • ISO 1132 Rolling bearings - Tolerances
    • ISO 1132-1:2000 Part 1: Terms and definitions
  • ISO 1135 Transfusion equipment for medical use
    • ISO 1135-3:2016 Part 3: Blood-taking sets for single use
    • ISO 1135-4:2015 Part 4: Transfusion sets for single use, gravity feed
    • ISO 1135-5:2015 Part 5: Transfusion sets for single use with pressure infusion apparatus
  • ISO 1146:1988 Pyrometric reference cones for laboratory use – Specification
  • ISO 1151 Flight dynamics - Concepts, quantities and symbols
    • ISO 1151-1:1988 Part 1: Aircraft motion relative to the air
    • ISO 1151-2:1985 Part 2: Motions of the aircraft and the atmosphere relative to the Earth
    • ISO 1151-3:1989 Part 3: Derivatives of forces, moments and their coefficients
    • ISO 1151-4:1994 Part 4: Concepts and quantities used in the study of aircraft stability and control
    • ISO 1151-5:1987 Part 5: Quantities used in measurements
    • ISO 1151-6:1982 Part 6: Aircraft geometry
    • ISO 1151-7:1985 Part 7: Flight points and flight envelopes
    • ISO 1151-8:1992 Part 8: Concepts and quantities used in the study of the dynamic behaviour of the aircraft
    • ISO 1151-9:1993 Part 9: Models of atmospheric motions along the trajectory of the aircraft
  • ISO 1154:1975 Information processing – Punched paper tape – Dimensions and location of feed holes and code holes
  • ISO 1155:1978 Information processing – Use of longitudinal parity to detect errors in information messages
  • ISO 1176:1990 Road vehicles – Masses – Vocabulary and codes
  • ISO 1177:1985 Information processing – Character structure for start/stop and synchronous character oriented transmission
  • ISO 1182 Reaction to fire tests for products—Non-combustibility test
  • ISO 1213 Solid mineral fuels – Vocabulary
    • ISO 1213-1:1993 Part 1: Terms relating to coal preparation
    • ISO 1213-2:2016 Part 2: Terms relating to sampling, testing and analysis
  • ISO 1217 Displacement compressors—Acceptance tests
  • ISO 1219 Fluid power systems and components - Graphical symbols and circuit diagrams
    • ISO 1219-1:2012 Part 1: Graphical symbols for conventional use and data-processing applications
    • ISO 1219-2:2012 Part 2: Circuit diagrams
    • ISO 1219-3:2016 Part 3: Symbol modules and connected symbols in circuit diagrams
  • ISO 1222 Photography – Tripod connections
  • ISO 1268 Fibre-reinforced plastics – Methods of producing test plates
  • ISO 1302:2002 Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation
  • ISO 1382:2012 Rubber – Vocabulary
  • ISO 1402 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
  • ISO 1413:2016 Horology - Shock-resistant wrist watches
  • ISO 1438:2017 Hydrometry – Open channel flow measurement using thin-plate weirs
  • ISO 1502:1996 ISO general-purpose metric screw threads – Gauges and gauging
  • ISO 1506:1982 Textile machinery – Dyeing, finishing and allied machinery – Classification and nomenclature
  • ISO 1531:1973 Fishing nets – Hanging of netting – Basic terms and definitions
  • ISO 1538:1984 Programming languages - ALGOL 60
  • ISO/IEC 1539 Information technology – Programming languages – Fortran
    • ISO/IEC 1539-1:2010 Part 1: Base language
    • ISO/IEC 1539-2:2000 Part 2: Varying length character strings
  • ISO 1586:1977 Textile machinery and accessories – Shuttles – Terms and designation in relation to the position of the shuttle eye
  • ISO 1629:2013 Rubber and latices – Nomenclature
  • ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing
  • ISO 1663 Rigid cellular plastics – Determination of water vapour transmission properties
  • ISO 1680:2013 Acoustics – Test code for the measurement of airborne noise emitted by rotating electrical machines
  • ISO 1681:1973 Information processing – Unpunched paper cards – Specification
  • ISO 1683:2015 Acoustics - Preferred reference values for acoustical and vibratory levels
  • ISO 1703:2005 Assembly tools for screws and nuts - Designation and nomenclature
  • ISO 1730:1980 Dictation equipment – Basic operating requirements
  • ISO 1745:1975 Information processing – Basic mode control procedures for data communication systems
  • ISO 1750 Pesticides and other agrochemicals – Common names
  • ISO 1768:1975 Glass hydrometers – Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids)
  • ISO 1769:1975 Laboratory glassware – Pipettes – Colour coding
  • ISO 1770:1981 Solid-stem general purpose thermometers
  • ISO 1771:1981 Enclosed-scale general purpose thermometers
  • ISO 1791:1983 Building construction – Modular co-ordination – Vocabulary
  • ISO 1803:1997 Building construction – Tolerances – Expression of dimensional accuracy – Principles and terminology
  • ISO 1804:1972 Doors – Terminology
  • ISO 1809:1977 Textile machinery and accessories – Types of formers for yarn packages – Nomenclature
  • ISO 1828:2012 Health informatics – Categorial structure for terminological systems of surgical procedures
  • ISO 1837:2003 Lifting hooks – Nomenclature
  • ISO 1858:1977 Information processing – General purpose hubs and reels, with 76 mm (3 in) centrehole, for magnetic tape used in interchange instrumentation applications
  • ISO 1859:1973 Information processing – Unrecorded magnetic tapes for interchange instrumentation applications – General dimensional requirements
  • ISO 1860:1986 Information processing – Precision reels for magnetic tape used in interchange instrumentation applications
  • ISO 1861:1975 Information processing – 7- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 8 rpmm (200 rpi)
  • ISO 1862:1975 Information processing – 9- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 8 rpmm (200 rpi)
  • ISO/IEC 1863:1990 Information processing – 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using NRZ1 at 32 ftpmm (800 ftpi) – 32 cpmm (800 cpi)
  • ISO/IEC 1864:1992 Information technology – Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange – 32 ftpmm (800 ftpi), NRZ1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm (9 042 ftpi), NRZ1
  • ISO 1891:2009 Fasteners - Terminology
    • ISO 1891-2:2014 Part 2: Vocabulary and definitions for coatings
  • ISO 1928 Solid mineral fuels – Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
  • ISO 1938 Geometrical product specifications (GPS) – Dimensional measuring equipment
    • ISO 1938-1:2015 Part 1: Plain limit gauges of linear size
    • ISO 1938-2:2017 Part 2: Reference disk gauges
  • ISO 1942:2009 Dentistry - Vocabulary
  • ISO 1951:2007 Presentation/representation of entries in dictionaries - Requirements, recommendations and information
  • ISO 1956 Fruits and vegetables – Morphological and structural terminology
    • ISO 1956-1:1982 (No part title)
    • ISO 1956-2:1989 (No part title)
  • ISO 1964:1987 Shipbuilding - Indication of details on the general arrangement plans of ships
  • ISO 1968:2004 Fibre ropes and cordage – Vocabulary
  • ISO/IEC 1989:2014 Information technology - Programming languages, their environments and system software interfaces - Programming language COBOL
  • ISO 1990 Fruits – Nomenclature
    • ISO 1990-1:1982 First list
    • ISO 1990-2:1985 Second list
  • ISO 1991 Vegetables – Nomenclature
    • ISO 1991-1:1982 First list
    • ISO 1991-2:1995 Part 2: Second list
  • ISO 1996 Acoustics – Description, measurement and assessment of environmental noise
    • ISO 1996-2:2017 Part 2: Determination of sound pressure levels
  • ISO 1998 Petroleum industry – Terminology
    • ISO 1998-1:1998 Part 1: Raw materials and products
    • ISO 1998-2:1998 Part 2: Properties and tests
    • ISO 1998-3:1998 Part 3: Exploration and production
    • ISO 1998-4:1998 Part 4: Refining
    • ISO 1998-5:1998 Part 5: Transport, storage, distribution
    • ISO 1998-6:2000 Part 6: Measurement
    • ISO 1998-7:1998 Part 7: Miscellaneous terms
    • ISO 1998-99:2000 Part 99: General and index
  • ISO 2014:1976 Writing of calendar dates in all-numeric form [Withdrawn: replaced by ISO 8601:1988]
  • ISO 2015:1976 Numbering of weeks [Withdrawn: replaced by ISO 8601:1988]
  • ISO 2017 Mechanical vibration and shock – Resilient mounting systems
    • ISO 2017-1:2005 Part 1: Technical information to be exchanged for the application of isolation systems
    • ISO 2017-2:2007 Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems
    • ISO 2017-3:2015 Part 3: Technical information to be exchanged for application of vibration isolation to new buildings
  • ISO/IEC 2022:1994 Information technology – Character code structure and extension techniques
  • ISO 2033:1983 Information processing - Coding of machine readable characters (MICR and OCR)
  • ISO 2041:2009 Mechanical vibration, shock and condition monitoring - Vocabulary
  • ISO 2047:1975 Information processing - Graphical representations for the control characters of the 7- bit coded character set
  • ISO 2074:2007 Plywood – Vocabulary
  • ISO 2076:2013 Textiles – Man-made fibres – Generic names
  • ISO 2080:2008 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary
  • ISO 2108:2005 Information and documentation – International standard book number (ISBN)
  • ISO 2110:1989 Information technology – Data communication – 25-pole DTE/DCE interface connector and contact number assignments
  • ISO 2145:1978 Documentation – Numbering of divisions and subdivisions in written documents
  • ISO 2146:2010 Information and documentation - Registry services for libraries and related organizations
  • ISO 2148:1974 Continuous handling equipment – Nomenclature
  • ISO 2151:2004 Acoustics – Noise test code for compressors and vacuum pumps – Engineering method (Grade 2)
  • ISO 2162 Technical product documentation – Springs
    • ISO 2162-1:1993 Part 1: Simplified representation
    • ISO 2162-2:1993 Part 2: Presentation of data for cylindrical helical compression springs
  • ISO 2171 Cereals, pulses and by-products – Determination of ash yield by incineration
  • ISO 2186:2007 Fluid flow in closed conduits – Connections for pressure signal transmissions between primary and secondary elements
  • ISO 2187:1990 Spinning preparatory machinery, spinning and doubling (twisting) machinery – List of equivalent terms
  • ISO 2203:1973 Technical drawings – Conventional representation of gears
  • ISO 2205:1975 Textile machinery and accessories – Drafting arrangements for spinning machines – Terminology
  • ISO 2240:2003 Photography – Colour reversal camera films – Determination of ISO speed
  • ISO 2257:1980 Office machines and printing machines used for information processing – Widths of fabric printing ribbons on spools
  • ISO 2258:1976 Printing ribbons – Minimum markings to appear on containers
  • ISO 2281:1990 Horology - Water-resistant watches [Withdrawn: replaced by ISO 22810:2010]
  • ISO 2300:1973 Sawn timber of broadleaved species – Defects – Terms and definitions
  • ISO 2331:1974 Fork lift trucks – Hook-on type fork arms – Vocabulary
  • ISO/IEC 2375:2003 Information technology - Procedure for registration of escape sequences and coded character sets
  • ISO/IEC 2382:2015 Information technology - Vocabulary
    • ISO/IEC 2382-36:2013 Part 36: Learning, education and training
    • ISO/IEC 2382-37:2017 Part 37: Biometrics
  • ISO 2384:1977 Documentation – Presentation of translations
  • ISO 2395:1990 Test sieves and test sieving - Vocabulary
  • ISO 2425:2010 Hydrometry – Measurement of liquid flow in open channels under tidal conditions
  • ISO 2444:1988 Joints in building – Vocabulary
  • ISO 2532:1974 Steel wire ropes - Vocabulary
  • ISO 2533:1975 Standard Atmosphere
  • ISO 2537:2007 Hydrometry – Rotating-element current-meters
  • ISO 2538 Geometrical product specifications (GPS) - Wedges
    • ISO 2538-1:2014 Part 1: Series of angles and slopes
    • ISO 2538-2:2014 Part 2: Dimensioning and tolerancing
  • ISO 2553:2013 Welding and allied processes – Symbolic representation on drawings – Welded joints
  • ISO 2574:1994 Aircraft – Electrical cables – Identification marking
  • ISO 2575:2010 Road vehicles - Symbols for controls, indicators and tell-tales
  • ISO/IEC 2593:2000 Information technology – Telecommunications and information exchange between systems – 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments
  • ISO 2602:1980 Statistical interpretation of test results - Estimation of the mean - Confidence interval
  • ISO 2628:1973 Basic mode control procedures – Complements
  • ISO 2629:1973 Basic mode control procedures – Conversational information message transfer
  • ISO 2669:1995 Environmental tests for aircraft equipment - Steady-state acceleration
  • ISO 2671:1982 Environmental tests for aircraft equipment - Part 3.4 : Acoustic vibration
  • ISO 2685:1998 Aircraft - Environmental test procedure for airborne equipment - Resistance to fire in designated fire zones
  • :2014 Geometrical product specifications (GPS) – Geometrical tolerancing – Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
  • ISO 2709:2008 Information and documentation – Format for information exchange
  • ISO 2710 Reciprocating internal combustion engines - Vocabulary
    • ISO 2710-1:2000 Part 1: Terms for engine design and operation
    • ISO 2710-2:1999 Part 2: Terms for engine maintenance
  • ISO 2711:1973 Information processing interchange - Representation of ordinal dates [Withdrawn: replaced by ISO 8601:1988]
  • ISO 2768 General tolerances
    • ISO 2768-1:1989 Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
    • ISO 2768-2:1989 Part 2: Geometrical tolerances for features without individual tolerance indications
  • ISO 2775:1977 Office machines and printing machines used for information processing – Widths of one-time paper or plastic printing ribbons and marking to indicate the end of the ribbons
  • ISO 2784:1974 Continuous forms used for information processing - Sizes and sprocket feed holes
  • ISO 2788:1986 Documentation - Guidelines for the establishment and development of monolingual thesauri [Withdrawn: replaced by ISO 25964-1:2011]
  • ISO 2789:2013 Information and documentation - International library statistics
  • ISO 2806:1994 Industrial automation systems - Numerical control of machines - Vocabulary
  • ISO 2822 Raw cattle hides and calf skins
    • ISO 2822-1:1998 Part 1: Descriptions of defects
  • ISO 2848:1984 Building construction - Modular coordination - Principles and rules
  • ISO 2852 Stainless steel clamp pipe couplings for the food industry
  • ISO 2854:1976 Statistical interpretation of data - Techniques of estimation and tests relating to means and variances
  • ISO 2859 Sampling procedures for inspection by attributes
    • ISO 2859-1:1999 Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
    • ISO 2859-2:1985 Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
    • ISO 2859-3:2005 Part 3: Skip-lot sampling procedures
    • ISO 2859-4:2002 Part 4: Procedures for assessment of declared quality levels
    • ISO 2859-5:2005 Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
    • ISO 2859-10:2006 Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
  • ISO 2922:2000 Acoustics – Measurement of airborne sound emitted by vessels on inland waterways and harbours
  • ISO 2923:1996 Acoustics - Measurement of noise on board vessels
  • ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity
  • ISO 2972:1979 Numerical control of machines - Symbols
  • ISO 2975 Measurement of water flow in closed conduits – Tracer methods
    • ISO 2975-1:1974 Part 1: General
    • ISO 2975-2:1975 Part 2: Constant rate injection method using non-radioactive tracers
    • ISO 2975-3:1976 Part 3: Constant rate injection method using radioactive tracers
    • ISO 2975-6:1977 Part 6: Transit time method using non-radioactive tracers
    • ISO 2975-7:1977 Part 7: Transit time method using radioactive tracers
  • Basic quantities in cutting and grinding
    • ISO 3002-1:1982 Part 1: Geometry of the active part of cutting tools – General terms, reference systems, tool and working angles, chip breakers
    • ISO 3002-2:1982 Part 2: Geometry of the active part of cutting tools – General conversion formulae to relate tool and working angles
    • ISO 3002-3:1984 Part 3: Geometric and kinematic quantities in cutting
    • ISO 3002-4:1984 Part 4: Forces, energy, power
    • ISO 3002-5:1989 Part 5: Basic terminology for grinding processes using grinding wheels
  • ISO 3029:1995 Photography - 126-size cartridges - Dimensions of cartridge, film and backing paper [Withdrawn without replacement]
  • ISO 3040:2016 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Cones
  • ISO 3046 Reciprocating internal combustion engines – Performance
    • ISO 3046-5:2001 Part 5: Torsional vibrations
  • ISO 3082 Iron ores – Sampling and sample preparation procedures
  • ISO 3095:2013 Acoustics – Railway applications – Measurement of noise emitted by railbound vehicles
  • ISO 3098 Technical product documentation – Lettering
    • ISO 3098-1:2015 Part 1: General requirements
    • ISO 3098-2:2000 Part 2: Latin alphabet, numerals and marks
    • ISO 3098-3:2000 Part 3: Greek alphabet
    • ISO 3098-4:2000 Part 4: Diacritical and particular marks for the Latin alphabet
    • ISO 3098-5:1997 Part 5: CAD lettering of the Latin alphabet, numerals and marks
    • ISO 3098-6:2000 Part 6: Cyrillic alphabet
  • ISO 3103 Tea – Preparation of liquor for use in sensory tests
  • ISO 3105:1994 Glass capillary kinematic viscometers – Specifications and operating instructions
  • ISO 3166 Codes for the representation of names of countries and their subdivisions
    • ISO 3166-1:2013 Part 1: Country codes
    • ISO 3166-2:2013 Part 2: Country subdivision code
    • ISO 3166-3:2013 Part 3: Code for formerly used names of countries
  • ISO 3252:1999 Powder metallurgy – Vocabulary
  • ISO 3272 Microfilming of technical drawings and other drawing office documents
    • ISO 3272-1:2003 Part 1: Operating procedures
    • ISO 3272-2:1994 Part 2: Quality criteria and control of 35 mm silver gelatin microfilms
    • ISO 3272-3:2001 Part 3: Aperture card for 35 mm microfilm
    • ISO 3272-4:1994 Part 4: Microfilming of drawings of special and exceptional elongated sizes
    • ISO 3272-6:2000 Part 6: Quality criteria and control of systems for enlargements from 35 mm microfilm
  • ISO 3274:1996 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Nominal characteristics of contact (stylus) instruments
  • ISO 3275:1974 Information processing - Implementation of the 7- bit coded character set and its 7- bit and 8- bit extensions on 3,81 mm magnetic cassette for data interchange
  • ISO 3287:1999 Powered industrial trucks - Symbols for operator controls and other displays
  • ISO 3297:2007 Information and documentation – International standard serial number (ISSN)
  • ISO 3301:1975 Statistical interpretation of data - Comparison of two means in the case of paired observations
  • ISO 3307:1975 Information interchange - Representations of time of the day [Withdrawn: replaced by ISO 8601:1988]
  • ISO 3354:2008 Measurement of clean water flow in closed conduits – Velocity-area method using current-meters in full conduits and under regular flow conditions
  • ISO 3381:2005 Railway applications – Acoustics – Measurement of noise inside railbound vehicles
  • ISO 3394:2012 Packaging - Complete, filled transport packages and unit loads - Dimensions of rigid rectangular packages
  • ISO 3407:1983 Information processing – Information interchange on 3,81 mm (0.150 in) magnetic tape cassette at 4 cpmm (100 cpi), phase encoded at 63 ftpmm (1 600 ftpi)
  • ISO 3408 Ball screws
    • ISO 3408-1:2006 Part 1: Vocabulary and designation
  • ISO 3454:2008 Hydrometry – Direct depth sounding and suspension equipment
  • ISO 3455:2007 Hydrometry – Calibration of current-meters in straight open tanks
  • ISO 3493:2014 Vanilla – Vocabulary
  • ISO 3494:1976 Statistical interpretation of data - Power of tests relating to means and variances
  • ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners
  • ISO 3507:1999 Laboratory glassware – Pyknometers
  • ISO 3509:2005 Coffee and coffee products – Vocabulary
  • ISO 3511 Industrial process measurement control functions and instrumentation - Symbolic representation[Note 3]
    • ISO 3511-1:1977 Part 1: Basic requirements
    • ISO 3511-2:1984 Part 2: Extension of basic requirements
    • ISO 3511-3:1984 Part 3: Detailed symbols for instrument interconnection diagrams
    • ISO 3511-4:1985 Part 4: Basic symbols for process computer, interface, and shared display/control functions
  • ISO 3529 Vacuum technology - Vocabulary
    • ISO 3529-1:1981 Part 1: General terms
    • ISO 3529-2:1981 Part 2: Vacuum pumps and related terms
    • ISO 3529-3:2014 Part 3: Total and partial pressure vacuum gauges
  • ISO 3534 Statistics – Vocabulary and symbols
    • ISO 3534-1:2006 Part 1: General statistical terms and terms used in probability
    • ISO 3534-2:2006 Part 2: Applied statistics
    • ISO 3534-3:2013 Part 3: Design of experiments
    • ISO 3534-4:2014 Part 4: Survey sampling
  • ISO 3535:1977 Forms design sheet and layout chart
  • ISO 3536:2016 Road vehicles – Safety glazing materials – Vocabulary
  • ISO 3537 Road vehicles – Safety glazing materials – Mechanical tests
  • ISO 3538 Road vehicles – Safety glazing materials – Test methods for optical properties
  • ISO 3540:1976 Paper or plastic printing ribbons – Characteristics of cores
  • ISO 3561:1976 Information processing – Interchangeable magnetic six-disk pack – Track format
  • ISO 3562:1976 Information processing – Interchangeable magnetic single-disk cartridge (top loaded) – Physical and magnetic characteristics
  • ISO 3563:1976 Information processing – Interchangeable magnetic single-disk cartridge (top loaded) – Track format
  • ISO 3564:1976 Information processing – Interchangeable magnetic eleven-disk pack – Physical and magnetic characteristics
  • ISO 3572:1976 Textiles – Weaves – Definitions of general terms and basic weaves
  • ISO 3591 Sensory analysis – Apparatus – Wine-tasting glass
  • ISO 3593 Starch — Determination of ash
  • ISO 3601 Fluid power systems – O-rings
    • ISO 3601-1 Inside diameters, cross-sections, tolerances and designation codes
    • ISO 3601-2 Housing dimensions for general applications
    • ISO 3601-3 Quality acceptance criteria
    • ISO 3601-4 Anti-extrusion rings (back-up rings)
    • ISO 3601-5 Suitability of elastomeric materials for industrial applications
  • ISO 3602:1989 Documentation – Romanization of Japanese (kana script)
  • ISO 3611:2010 Geometrical product specifications (GPS) – Dimensional measuring equipment: Micrometers for external measurements – Design and metrological characteristics
  • ISO 3632 Spices – Saffron (Crocus sativus L.)[Note 3]
  • :1981 Size designation of clothes – Definitions and body measurement procedure
  • ISO 3650:1998 Geometrical Product Specifications (GPS) – Length standards – Gauge blocks
  • ISO 3660:1976 Fishing nets – Mounting and joining of netting – Terms and illustrations
  • ISO/TR 3666:1998 Viscosity of water
  • :2012 Packaging - Complete, filled transport packages and unit loads - Unit load dimensions
  • ISO 3690 Welding and allied processes — Determination of hydrogen content in arc weld metal
  • ISO 3692:1976 Information processing – Reels and cores for 25,4 mm (1 in) perforated paper tape for information interchange – Dimensions
  • ISO 3713:1987 Ferroalloys - Sampling and preparation of samples - General rules
  • ISO 3715 Ships and marine technology – Propulsion plants for ships
    • ISO 3715-1:2002 Part 1: Vocabulary for geometry of propellers
    • ISO 3715-2:2001 Part 2: Vocabulary for controllable-pitch propeller plants
  • ISO/TS 3716:2006 Hydrometry – Functional requirements and characteristics of suspended-sediment samplers
  • ISO 3740:2000 Acoustics – Determination of sound power levels of noise sources – Guidelines for the use of basic standards
  • ISO 3741:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for reverberation test rooms
  • ISO 3743 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for small movable sources in reverberant fields[Note 3]
    • ISO 3743-1:2010 Part 1: Comparison method for a hard-walled test room
    • ISO 3743-2:1994 Part 2: Methods for special reverberation test rooms
  • ISO 3744:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for an essentially free field over a reflecting plane
  • ISO 3745:2012 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for anechoic rooms and hemi-anechoic rooms
  • ISO 3746:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Survey method using an enveloping measurement surface over a reflecting plane
  • ISO 3747:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering/survey methods for use in situ in a reverberant environment
  • ISO 3766:2003 Construction drawings – Simplified representation of concrete reinforcement
  • ISO 3767 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays
    • ISO 3767-1:2016 Part 1: Common symbols
    • ISO 3767-2:2016 Part 2: Symbols for agricultural tractors and machinery
    • ISO 3767-3:2016 Part 3: Symbols for powered lawn and garden equipment
    • ISO 3767-4:2016 Part 4: Symbols for forestry machinery
    • ISO 3767-5:2016 Part 5: Symbols for manual portable forestry machines
  • ISO/IEC 3788:1990 Information processing – 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using phase encoding at 126 ftpmm (3 200 ftpi), 63 cpmm (1 600 cpi)
  • ISO 3791:1976 Office machines and data processing equipment - Keyboard layouts for numeric applications
  • ISO 3792:1976 Adding machines - Layout of function keyboard
  • ISO 3802:1976 Information processing – General purpose reels with 8 mm (5/16 in) centre hole for magnetic tape for interchange instrumentation applications
  • ISO 3819:2015 Laboratory glassware – Beakers
  • ISO 3822 Acoustics – Laboratory tests on noise emission from appliances and equipment used in water supply installations
    • ISO 3822-1:1999 Part 1: Method of measurement
    • ISO 3822-2:1995 Part 2: Mounting and operating conditions for draw-off taps and mixing valves
    • ISO 3822-3:1997 Part 3: Mounting and operating conditions for in-line valves and appliances
    • ISO 3822-4:1997 Part 4: Mounting and operating conditions for special appliances
  • ISO 3826 Plastics collapsible containers for human blood and blood components
    • ISO 3826-1:2013 Part 1: Conventional containers
    • ISO 3826-2:2008 Part 2: Graphical symbols for use on labels and instruction leaflets
    • ISO 3826-3:2006 Part 3: Blood bag systems with integrated features
    • ISO 3826-4:2015 Part 4: Aphaeresis blood bag systems with integrated features
  • ISO 3828:2008 Shipbuilding and marine structures – Deck machinery – Vocabulary and symbols
  • ISO 3833:1977 Road vehicles – Types – Terms and definitions
  • ISO 3835 Equipment for vine cultivation and wine making – Vocabulary
    • ISO 3835-1:1976 (No part title)
    • ISO 3835-3:1980 (No part title)
    • ISO 3835-4:1981 (No part title)
  • ISO 3846:2008 Hydrometry – Open channel flow measurement using rectangular broad-crested weirs
  • ISO 3847:1977 Liquid flow measurement in open channels by weirs and flumes – End-depth method for estimation of flow in rectangular channels with a free overfall
  • ISO 3855:1977 Milling cutters - Nomenclature
  • ISO 3857 Compressors, pneumatic tools and machines - Vocabulary
    • ISO 3857-1:1977 Part 1: General
    • ISO 3857-2:1977 Part 2: Compressors
    • ISO 3857-3:1989 Part 3: Pneumatic tools and machines
    • ISO 3857-4:2012 Part 4: Air treatment
  • ISO 3861:2005 Rubber hoses for sand and grit blasting - Specification
  • ISO 3864 Graphical symbols – Safety colours and safety signs
  • ISO 3866:1977 Office machines and printing machines used for information processing – Widths of fabric printing ribbons on spools exceeding 19 mm
  • ISO 3877 Tyres, valves and tubes – List of equivalent terms
    • ISO 3877-1:1997 Part 1: Tyres
    • ISO 3877-2:1997 Part 2: Tyre valves
    • ISO 3877-3:1978 Part 3: Tubes
    • ISO 3877-4:1984 Part 4: Solid tyres
  • ISO 3880 Building construction – Stairs – Vocabulary
    • ISO 3880-1:1977
  • ISO 3883:1977 Office machines – Line and character capacity of address masters
  • ISO 3901:2001 Information and documentation – International Standard Recording Code (ISRC)
  • ISO 3911:2004 Wheels and rims for pneumatic tyres – Vocabulary, designation and marking
  • ISO 3918:2007 Milking machine installations – Vocabulary
  • ISO 3950:2016 Dentistry - Designation system for teeth and areas of the oral cavity
  • ISO 3951 Sampling procedures for inspection by variables
    • ISO 3951-1:2013 Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
    • ISO 3951-2:2013 Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
    • ISO 3951-3:2007 Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
    • ISO 3951-4:2011 Part 4: Procedures for assessment of declared quality levels
    • ISO 3951-5:2006 Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
  • ISO 3952 Kinematic diagrams - Graphical symbols
    • ISO 3952-1:1981 (Motion of links of mechanisms; Kinematic pairs; Links and connections of their components; Linkage of bars and their links)
    • ISO 3952-2:1981 (Friction and gear mechanisms; Cam mechanisms)
    • ISO 3952-3:1979 (Maltese and ratchet mechanisms; Couplings and brakes)
    • ISO 3952-4:1984 (Miscellaneous mechanisms and their components)
  • ISO 3966:2008 Measurement of fluid flow in closed conduits – Velocity area method using Pitot static tubes
  • ISO 3977 Gas turbines – Procurement
  • ISO 4006:1991 Measurement of fluid flow in closed conduits - Vocabulary and symbols
  • ISO 4007:2012 Personal protective equipment - Eye and face protection - Vocabulary
  • ISO 4031:1978 Information interchange - Representation of local time differentials [Withdrawn: replaced by ISO 8601:1988]
  • ISO 4037 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy
    • ISO 4037-1:1996 Part 1: Radiation characteristics and production
    • ISO 4037-2:1997 Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV
    • ISO 4037-3:1999 Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence
    • ISO 4037-4:2004 Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields
  • ISO 4046 Paper, board, pulps and related terms – Vocabulary
    • ISO 4046-1:2016 Part 1: Alphabetical index
    • ISO 4046-2:2016 Part 2: Pulping terminology
    • ISO 4046-3:2016 Part 3: Paper-making terminology
    • ISO 4046-4:2016 Part 4: Paper and board grades and converted products
    • ISO 4046-5:2016 Part 5: Properties of pulp, paper and board
  • ISO 4057:1986 Information processing – Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge, 63 bpmm (1 600 bpi) phase-encoded
  • ISO 4063:2009 Welding and allied processes - Nomenclature of processes and reference numbers
  • Natural latex rubber condoms – Requirements and test methods
  • ISO 4087:2005 Micrographics - Microfilming of newspapers for archival purposes on 35 mm microfilm
  • ISO 4125:1991 Dry fruits and dried fruits – Definitions and nomenclature
  • ISO 4129:2012 Road vehicles - Mopeds - Symbols for controls, indicators and tell-tales
  • ISO 4130:1978 Road vehicles – Three-dimensional reference system and fiducial marks – Definitions
  • ISO 4135:2001 Anaesthetic and respiratory equipment - Vocabulary
  • ISO 4139:1979 Ferrosilicon - Determination of aluminium content - Flame atomic absorption spectrometric method
  • ISO 4140:1979 Ferrochromium and ferrosilicochromium - Determination of chromium content - Potentiometric method
  • ISO 4157 Construction drawings – Designation systems
  • ISO 4158:1978 Ferrosilicon, ferrosilicomanganese and ferrosilicochromium - Determination of silicon content - Gravimetric method
  • ISO 4159:1978 Ferromanganese and ferrosilicomanganese - Determination of manganese content - Potentiometric method
  • ISO 4165 Road vehicles — Electrical connections — Double-pole connection
  • ISO 4172:1991 Technical drawings – Construction drawings – Drawings for the assembly of prefabricated structures
  • ISO 4173:1980 Ferromolybdenum - Determination of molybdenum content - Gravimetric method
  • Ductile iron pipes and fittings for pressure and non-pressure pipelines – Cement mortar lining
  • ISO 4185:1980 Measurement of liquid flow in closed conduits – Weighing method
  • ISO 4217:2015 Codes for the representation of currencies
  • ISO 4223 Definitions of some terms used in the tyre industry
    • ISO 4223-1:2002 Part 1: Pneumatic tyres
    • ISO 4223-2:1991 Part 2: Solid tyres
  • ISO 4225:1994 Air quality - General aspects - Vocabulary
  • ISO 4226:2007 Air quality – General aspects – Units of measurement
  • ISO 4232 Office machines – Minimum information to be included in specification sheets
    • ISO 4232-3:1984 Part 3: Postal franking machines
  • ISO 4246:1994 Cinematography - Vocabulary
  • ISO 4248:1978 Jig bushes - Definitions and nomenclature
  • ISO 4287:1997 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
  • ISO 4288:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture
  • ISO 4291:1985 Methods for the assessement of departure from roundness - Measurement of variations in radius
  • ISO 4306 Cranes – Vocabulary
    • ISO 4306-1:2007 Part 1: General
    • ISO 4306-2:2012 Part 2: Mobile cranes
    • ISO 4306-3:2016 Part 3: Tower cranes
    • ISO 4306-5:2005 Part 5: Bridge and gantry cranes
  • ISO 4314 Surface active agents — Determination of free alkalinity or free acidity — Titrimetric method
  • ISO 4337:1977 Information processing – Interchangeable magnetic twelve-disk pack (100 Mbytes)
  • ISO 4341:1978 Information processing – Magnetic tape cassette and cartridge labelling and file structure for information interchange
  • ISO 4346:1977 Steel wire ropes for general purposes - Lubricants - Basic requirements
  • ISO 4359:2013 Flow measurement structures – Rectangular, trapezoidal and U-shaped flumes
  • ISO 4360:2008 Hydrometry – Open channel flow measurement using triangular profile weirs
  • ISO 4362:1999 Hydrometric determinations – Flow measurement in open channels using structures – Trapezoidal broad-crested weirs
  • ISO 4363:2002 Measurement of liquid flow in open channels – Methods for measurement of characteristics of suspended sediment
  • ISO 4364:1997 Measurement of liquid flow in open channels – Bed material sampling
  • ISO 4365:2005 Liquid flow in open channels – Sediment in streams and canals – Determination of concentration, particle size distribution and relative density
  • ISO 4366:2007 Hydrometry – Echo sounders for water depth measurements
  • ISO 4369:1979 Measurement of liquid flow in open channels – Moving-boat method
  • ISO 4371:1984 Measurement of liquid flow in open channels by weirs and flumes – End depth method for estimation of flow in non-rectangular channels with a free overfall (approximate method)
  • ISO 4373:2008 Hydrometry – Water level measuring devices
  • ISO 4374:1990 Liquid flow measurement in open channels – Round-nose horizontal broad-crested weirs
  • ISO 4375:2014 Hydrometry – Cableway systems for stream gauging
  • ISO 4377:2012 Hydrometric determinations – Flow measurement in open channels using structures – Flat-V weirs
  • ISO 4378 Plain bearings - Terms, definitions, classification and symbols
    • ISO 4378-1:2017 Part 1: Design, bearing materials and their properties
    • ISO 4378-2:2017 Part 2: Friction and wear
    • ISO 4378-3:2017 Part 3: Lubrication
    • ISO 4378-4:2009 Part 4: Basic symbols
    • ISO 4378-5:2009 Part 5: Application of symbols
    • ISO/TR 4378-6:2012 Part 6: Abbreviated terms
  • ISO 4412 Hydraulic fluid power – Test code for determination of airborne noise levels
    • ISO 4412-1:1991 Part 1: Pumps
    • ISO 4412-2:1991 Part 2: Motors
    • ISO 4412-3:1991 Part 3: Pumps – Method using a parallelepiped microphone array
  • ISO 4481:1977 Cutlery and flatware – Nomenclature
  • ISO 4548 Methods of test for full-flow lubricating oil filters for internal combustion engines
    • ISO 4548-7:2012 Part 7: Vibration fatigue test
  • ISO 4551:1987 Ferroalloys - Sampling and sieve analysis
  • ISO 4552 Ferroalloys - Sampling and sample preparation for chemical analysis
    • ISO 4552-1:1987 Part 1: Ferrochromium, ferrosilicochromium, ferrosilicon, ferrosilicomanganese, ferromanganese
    • ISO 4552-2:1987 Part 2: Ferrotitanium, ferromolybdenum, , ferroniobium, ferrovanadium
  • ISO 4578 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
  • ISO 4582 Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
  • ISO 4587 Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
  • ISO 4618:2014 Paints and varnishes – Terms and definitions
  • Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance
    • ISO 4628-1 General introduction and designation system
    • ISO 4628-2 Assessment of degree of blistering
    • ISO 4628-3 Assessment of degree of rusting
    • ISO 4628-4 Assessment of degree of cracking
    • ISO 4628-5 Assessment of degree of flaking
    • ISO 4628-6 Assessment of degree of chalking by tape method
    • ISO 4628-7 Assessment of degree of chalking by velvet method
    • ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe
    • ISO 4628-10 Assessment of degree of filiform corrosion
  • ISO 4683 Raw sheep skins
    • ISO 4683-1:1998 Part 1: Descriptions of defects
  • ISO 4720:2009 Essential oils – Nomenclature
  • ISO 4730:2017 Essential oil of Melaleuca, terpinen-4-ol type (Tea Tree oil)
  • ISO 4786:1977 Enclosed-scale adjustable-range thermometers
  • ISO 4787:2010 Laboratory glassware – Volumetric instruments – Methods for testing of capacity and for use
  • ISO 4788:2005 Laboratory glassware – Graduated measuring cylinders
  • ISO 4791 Laboratory apparatus – Vocabulary relating to apparatus made essentially from glass, porcelain or vitreous silica
    • ISO 4791-1:1985 Part 1: Names for items of apparatus
  • ISO 4795:1996 Glass for thermometer bulbs
  • ISO 4801:1979 Glass alcoholometers and alcohol hydrometers not incorporating a thermometer
  • ISO 4805:1982 Laboratory glassware – Thermo-alcoholometers and alcohol-thermohydrometers
  • ISO 4831:2006 Microbiology of food and animal feeding stuffs – Horizontal method for the detection and enumeration of coliforms – Most probable number technique
  • ISO 4832:2006 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of coliforms – Colony-count technique
  • ISO 4833 Microbiology of the food chain – Horizontal method for the enumeration of microorganisms
    • ISO 4833-1:2013 Part 1: Colony count at 30 degrees C by the pour plate technique
    • ISO 4833-2:2013 Part 2: Colony count at 30 degrees C by the surface plating technique
  • ISO 4866:2010 Mechanical vibration and shock – Vibration of fixed structures – Guidelines for the measurement of vibrations and evaluation of their effects on structures
  • ISO 4871:1996 Acoustics – Declaration and verification of noise emission values of machinery and equipment
  • :1991 Information technology – ISO 8-bit code for information interchange – Structure and rules for implementation
  • ISO 4875 Metal-cutting band saw blades
    • ISO 4875-1:2006 Part 1: Vocabulary
  • ISO 4880:1997 Burning behaviour of textiles and textile products - Vocabulary
  • ISO 4882:1979 Office machines and data processing equipment - Line spacings and character spacings
  • ISO 4885:2017 Ferrous materials - Heat treatments - Vocabulary
  • Plastics – Methods of exposure to laboratory light sources
  • ISO 4902:1989 Information technology – Data communication – 37-pole DTE/DCE interface connector and contact number assignments
  • ISO 4903:1989 Information technology – Data communication – 15-pole DTE/DCE interface connector and contact number assignments
  • ISO/IEC 4909:2006 Identification cards - Financial transaction cards - Magnetic stripe data content for track 3
  • ISO 4921:2000 Knitting – Basic concepts – Vocabulary

ISO 5000 – ISO 8999

  • ISO 5006:2017 Earth-moving machinery - Operator's field of view - Test method and performance criteria
  • ISO 5053 Industrial trucks – Terminology and classification
    • ISO 5053-1:2015 Part 1: Types of industrial trucks
  • ISO 5122:1979 Documentation - Abstract sheets in serial publications
  • ISO 5123:1984 Documentation - Headers for microfiche of monographs and serials
  • :2017 Information and documentation - Foundation and vocabulary
  • ISO 5128:1980 Acoustics – Measurement of noise inside motor vehicles
  • ISO 5129:2001 Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight
  • ISO 5130:2007 Acoustics – Measurements of sound pressure level emitted by stationary road vehicles
  • ISO 5131:2015 Tractors for agriculture and forestry – Measurement of noise at the operator's position – Survey method
  • ISO 5135:1997 Acoustics – Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
  • ISO 5136:2003 Acoustics – Determination of sound power radiated into a duct by fans and other air-moving devices – In-duct method
  • ISO 5138 Office machines - Vocabulary
    • ISO 5138-1:1978 Part 1: Dictation equipment
    • ISO 5138-2:1980 Part 2: Duplicators
    • ISO 5138-3:1981 Part 3: Addressing machines
    • ISO 5138-4:1981 Part 4: Letter opening machines
    • ISO 5138-5:1981 Part 5: Letter folding machines
    • ISO 5138-7:1986 Part 7: Postal franking machines
    • ISO 5138-9:1984 Part 9: Typewriters
  • Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
    • ISO 5167-1:2003 Part 1: General principles and requirements
    • ISO 5167-2:2003 Part 2: Orifice plates
    • ISO 5167-3:2003 Part 3: Nozzles and Venturi nozzles
    • ISO 5167-4:2003 Part 4: Venturi tubes
    • ISO 5167-5:2016 Part 5: Cone meters
  • ISO 5168:2005 Measurement of fluid flow – Procedures for the evaluation of uncertainties
  • ISO 5211:2017 Industrial valves - Part-turn actuator attachments
  • ISO/IEC 5218 Information technology – Codes for the representation of human sexes
  • ISO 5232:1998 Graphical symbols for textile machinery
  • ISO 5234:2005 Textile machinery and accessories – Metallic card clothing – Definitions of dimensions, types and mounting
  • ISO 5238 Textile machinery and accessories – Packages of yarns and intermediate products
    • ISO 5238-1:1982 Part 1: Terminology
  • ISO 5239:1980 Textile machinery and accessories – Winding – Basic terms
  • ISO 5247 Textile machinery and accessories – Weaving machines
    • ISO 5247-1:2004 Part 1: Vocabulary and classification
    • ISO 5247-3:1993 Part 3: Parts of the machine – Vocabulary
  • ISO 5248:2003 Textile machinery and accessories – Dyeing and finishing machinery – Vocabulary for ancillary devices
  • ISO 5250:2003 Textile machinery and accessories – Dyeing and finishing machinery – Terms for tentering and heat-treatment machinery
  • ISO 5261:1995 Technical drawings – Simplified representation of bars and profile sections
  • ISO 5284:1986 Conveyor belts – List of equivalent terms
  • ISO 5288:2001 Synchronous belt drives - Vocabulary
  • ISO 5323:1984 Solid wood parquet and raw parquet blocks – Vocabulary
  • ISO 5329:1978 Solid wood paving blocks – Vocabulary
  • ISO 5344:2004 Electrodynamic vibration generating systems – Performance characteristics
  • ISO 5347 Methods for the calibration of vibration and shock pick-ups
    • ISO 5347-8:1993 Part 8: Primary calibration by dual centrifuge
    • ISO 5347-12:1993 Part 12: Testing of transverse shock sensitivity
    • ISO 5347-13:1993 Part 13: Testing of base strain sensitivity
    • ISO 5347-15:1993 Part 15: Testing of acoustic sensitivity
    • ISO 5347-16:1993 Part 16: Testing of mounting torque sensitivity
    • ISO 5347-17:1993 Part 17: Testing of fixed temperature sensitivity
    • ISO 5347-18:1993 Part 18: Testing of transient temperature sensitivity
    • ISO 5347-22:1997 Part 22: Accelerometer resonance testing – General methods
  • ISO 5348:1998 Mechanical vibration and shock – Mechanical mounting of accelerometers
  • ISO 5356 Anaesthetic and respiratory equipment – Conical connectors
    • ISO 5356-1:2015 Part 1: Cones and sockets
    • ISO 5356-2:2012 Part 2: Screw-threaded weight-bearing connectors
  • ISO 5358:1992 Anaesthetic machines for use with humans
  • ISO 5359:2014 Anaesthetic and respiratory equipment – Low-pressure hose assemblies for use with medical gases
  • ISO 5360:2016 Anaesthetic vaporizers – Agent-specific filling systems
  • ISO 5361:2016 Anaesthetic and respiratory equipment – Tracheal tubes and connectors
  • ISO 5362:2006 Anaesthetic reservoir bags
  • ISO 5364:2016 Anaesthetic and respiratory equipment – Oropharyngeal airways
  • ISO 5366:2016 Anaesthetic and respiratory equipment – Tracheostomy tubes and connectors
  • ISO 5367:2014 Anaesthetic and respiratory equipment – Breathing sets and connectors
  • ISO 5391:2003 Pneumatic tools and machines - Vocabulary
  • ISO 5396:1977 Hardmetal heading dies - Terminology
  • ISO 5408:2009 Screw threads - Vocabulary
  • ISO 5419:1982 Twist drills - Terms, definitions and types
  • ISO 5420:1983 Reamers - Terms, definitions and types
  • ISO 5426:1983 Information and documentation - Extension of the Latin alphabet coded character set for bibliographic information interchange[Note 3]
    • ISO 5426-2:1996 Part 2: Latin characters used in minor European languages and obsolete typography
  • ISO 5427:1984 Extension of the Cyrillic alphabet coded character set for bibliographic information interchange
  • ISO 5428:1984 Greek alphabet coded character set for bibliographic information interchange
  • ISO 5436 Geometrical Product Specifications (GPS) – Surface texture: Profile method; Measurement standards
    • ISO 5436-1:2000 Part 1: Material measures
    • ISO 5436-2:2012 Part 2: Software measurement standards
  • ISO 5445:1980 Ferrosilicon - Specification and conditions of delivery
  • ISO 5446:2017 Ferromanganese - Specification and conditions of delivery
  • ISO 5447:1980 Ferrosilicomanganese - Specification and conditions of delivery
  • ISO 5448:1981 Ferrochromium - Specification and conditions of delivery
  • ISO 5449:1980 Ferrosilicochromium - Specification and conditions of delivery
  • ISO 5450:1980 Ferrotungsten - Specification and conditions of delivery
  • ISO 5451:1980 Ferrovanadium - Specification and conditions of delivery
  • ISO 5452:1980 Ferromolybdenum - Specification and conditions of delivery
  • ISO 5453:1980 Ferroniobium - Specification and conditions of delivery
  • ISO 5454:1980 Ferrotitanium - Specification and conditions of delivery
  • :1979 Technical drawings – Scales
  • ISO 5456 Technical drawings – Projection methods
    • ISO 5456-1:1996 Part 1: Synopsis
    • ISO 5456-2:1996 Part 2: Orthographic representations
    • ISO 5456-3:1996 Part 3: Axonometric representations
    • ISO 5456-4:1996 Part 4: Central projection
  • :1999 Technical product documentation – Sizes and layout of drawing sheets
  • :1998 Geometrical Product Specifications (GPS) – Geometrical tolerancing – Positional tolerancing
  • :2011 Geometrical product specifications (GPS) – Geometrical tolerancing – Datums and datum systems
  • ISO 5479:1997 Statistical interpretation of data - Tests for departure from the normal distribution
  • ISO 5492:2008 Sensory analysis – Vocabulary
  • ISO 5496:2006 Sensory analysis – Methodology – Initiation and training of assessors in the detection and recognition of odours
  • ISO 5507:2002 Oilseeds, vegetable oils and fats – Nomenclature
  • ISO 5526:2013 Cereals, pulses and other food grains – Nomenclature
  • ISO 5527:2015 Cereals – Vocabulary
  • ISO 5572:1987 Shipbuilding and marine structures - Numbering of equipment and structural elements in ships
  • ISO 5576:1997 Non-destructive testing - Industrial X-ray and gamma-ray radiology - Vocabulary
  • ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary
  • ISO 5593:1997 Rolling bearings - Vocabulary
  • ISO 5598:2008 Fluid power systems and components - Vocabulary
  • ISO 5652:1984 Information processing – 9-Track, 12,7 mm (0.5 in) wide magnetic tape for information interchange – Format and recording, using group coding at 246 cpmm (6 250 cpi)
  • ISO 5653:1980 Information processing – Interchangeable magnetic twelve-disk pack (200 Mbytes)
  • ISO 5654 Information processing – Data interchange on 200 mm (8 in) flexible disk cartridges using two-frequency recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on one side
    • ISO 5654-1:1984 Part 1: Dimensional, physical and magnetic characteristics
    • ISO 5654-2:1985 Part 2: Track format
  • ISO 5659 Plastics - Smoke generation
    • ISO 5659-1:1996 Part 1: Guidance on optical-density testing [Withdrawn: replaced by ISO 5659-2:2012]
    • ISO 5659-2:2017 Part 2: Determination of optical density by a single-chamber test
    • ISO/TR 5659-3:1999 Part 3: Determination of optical density by a dynamic-flow method [Withdrawn, no replacement]
  • Reaction-to-fire tests – Heat release, smoke production and mass loss rate
    • ISO 5660-1 Heat release rate (cone calorimeter method)
    • ISO 5660-2 Smoke production rate (dynamic measurement)
    • ISO/TS 5660-3 Guidance on measurement
  • ISO 5681:1992 Equipment for crop protection – Vocabulary
  • ISO 5702:1983 Equipment for harvesting – Combine harvester component parts – Equivalent terms
  • ISO 5725 Accuracy (trueness and precision) of measurement methods and results
    • ISO 5725-1:1994 Part 1: General principles and definitions
    • ISO 5725-2:1994 Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
    • ISO 5725-3:1994 Part 3: Intermediate measures of the precision of a standard measurement method
    • ISO 5725-4:1994 Part 4: Basic methods for the determination of the trueness of a standard measurement method
    • ISO 5725-5:1998 Part 5: Alternative methods for the determination of the precision of a standard measurement method
    • ISO 5725-6:1994 Part 6: Use in practice of accuracy values
  • ISO 5742:2004 Pliers and nippers - Nomenclature
  • ISO 5775 Bicycle tires and rims
  • ISO 5776 Graphic technology - Symbols for text correction
  • ISO 5800:2001 Photography – Colour negative films for still photography – Determination of ISO speed
  • ISO 5806:1984 Information processing - Specification of single-hit decision tables
  • ISO 5807:1985 Information processing - Documentation symbols and conventions for data, program and system flowcharts, program network charts and system resources charts
  • ISO 5826:2014 Resistance welding equipment – Transformers – General specifications applicable to all transformers
  • ISO 5832 Implants for surgery – Metallic materials
    • ISO 5832-1:2016 Part 1: Wrought stainless steel
    • ISO 5832-2:1999 Part 2: Unalloyed titanium
    • ISO 5832-3:2016 Part 3: Wrought titanium 6-aluminium 4-vanadium alloy
    • ISO 5832-4:2014 Part 4: Cobalt-chromium-molybdenum casting alloy
    • ISO 5832-5:2005 Part 5: Wrought cobalt-chromium-tungsten-nickel alloy
    • ISO 5832-6:1997 Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy
    • ISO 5832-7:2016 Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy
    • ISO 5832-8:1997 Part 8: Wrought cobalt-nickel-chromium-molybdenum- tungsten-iron alloy
    • ISO 5832-9:2007 Part 9: Wrought high nitrogen stainless steel
    • ISO 5832-11:2014 Part 11: Wrought titanium 6-aluminium 7-niobium alloy
    • ISO 5832-12:2007 Part 12: Wrought cobalt-chromium-molybdenum alloy
    • ISO 5832-14:2007 Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy
  • ISO 5833:2002 Implants for surgery – Acrylic resin cements
  • ISO 5834 Implants for surgery – Ultra-high-molecular-weight polyethylene
    • ISO 5834-1:2005 Part 1: Powder form
    • ISO 5834-2:2011 Part 2: Moulded forms
    • ISO 5834-3:2005 Part 3: Accelerated ageing methods
    • ISO 5834-4:2005 Part 4: Oxidation index measurement method
    • ISO 5834-5:2005 Part 5: Morphology assessment method
  • ISO 5835:1991 Implants for surgery – Metal bone screws with hexagonal drive connection, spherical under-surface of head, asymmetrical thread – Dimensions
  • ISO 5836:1988 Implants for surgery – Metal bone plates – Holes corresponding to screws with asymmetrical thread and spherical under-surface
  • ISO 5837 Implants for surgery – Intramedullary nailing systems
    • ISO 5837-1:1985 Part 1: Intramedullary nails with cloverleaf or V-shaped cross-section
  • ISO 5838 Implants for surgery – Metallic skeletal pins and wires[Note 3]
    • ISO 5838-1:2013 Part 1: General requirements
    • ISO 5838-2:1991 Part 2: Steinmann skeletal pins – Dimensions
    • ISO 5838-3:1993 Part 3: Kirschner skeletal wires
  • ISO 5840 Cardiovascular implants – Cardiac valve prostheses
    • ISO 5840-1:2015 Part 1: General requirements
    • ISO 5840-2:2015 Part 2: Surgically implanted heart valve substitutes
    • ISO 5840-3:2013 Part 3: Heart valve substitutes implanted by transcatheter techniques
  • ISO 5841 Implants for surgery – Cardiac pacemakers
    • ISO 5841-2:2014 Part 2: Reporting of clinical performance of populations of pulse generators or leads
    • ISO 5841-3:2013 Part 3: Low-profile connectors (IS-1) for implantable pacemakers
  • ISO 5843 Aerospace - List of equivalent terms[Note 3]
    • ISO 5843-1:1985 Part 1: Aerospace electrical equipment
    • ISO 5843-2:1990 Part 2: Aerospace rivets
    • ISO 5843-3:1997 Part 3: Aerospace bolts and nuts
    • ISO 5843-4:1990 Part 4: Flight dynamics
    • ISO 5843-5:1990 Part 5: Environmental and operating conditions for aircraft equipment
    • ISO 5843-6:1985 Part 6: Standard atmosphere
    • ISO 5843-8:1988 Part 8: Aircraft reliability
    • ISO 5843-9:1988 Part 9: Aircraft
    • ISO 5843-10:1988 Part 10: Aircraft structure
  • ISO 5845 Technical drawings – Simplified representation of the assembly of parts with fasteners
    • ISO 5845-1:1995 Part 1: General principles
    • ISO 5845-2:1995 Part 2: Rivets for aerospace equipment
  • ISO 5859:2014 Aerospace series - Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components
  • ISO 5878:1982 Reference atmospheres for aerospace use
  • ISO 5893 Rubber and plastics test equipment – Tensile, flexural and compression types (constant rate of traverse) – Specification
  • ISO 5963:1985 Documentation - Methods for examining documents, determining their subjects, and selecting indexing terms
  • ISO 5964 Documentation – Guidelines for the establishment and development of multilingual thesauri
  • ISO 5967:1981 Taps and thread cutting - Nomenclature of the main types and terminology
  • ISO 5968:1981 Circular screwing dies - Terminology
  • :1981 Size designation of clothes – Pantyhose
  • ISO 5989:1995 Photography - Pre-packaged chemicals for the processing of silver halide based photographic materials - Vocabulary
  • ISO 5993 Sodium hydroxide for industrial use—Determination of mercury content—Flameless atomic absorption spectrometric method
  • ISO 6009:2016 Hypodermic needles for single use – Colour coding for identification
  • ISO 6050:1987 Shipbuilding - Bulbous bow and side thruster symbols
  • ISO 6068:1985 Information processing – Recording characteristics of instrumentation magnetic tape (including telemetry systems) – Interchange requirements
  • ISO 6070:1981 Auxiliary tables for vibration generators – Methods of describing equipment characteristics
  • ISO 6078:1982 Black tea – Vocabulary
  • ISO 6093:1985 Information processing - Representation of numerical values in character strings for information interchange
  • ISO 6098:1984 Information processing – Self-loading cartridges for 12,7 mm (0.5 in) wide magnetic tape
  • ISO 6107 Water quality—Vocabulary
    • ISO 6107-1:2004 (No part title)
    • ISO 6107-2:2006 (No part title)
    • ISO 6107-3:1993 (No part title)
    • ISO 6107-4:1993 (No part title)
    • ISO 6107-5:2004 (No part title)
    • ISO 6107-6:2004 (No part title)
    • ISO 6107-7:2006 (No part title)
    • ISO 6107-8:1993 (No part title)
    • ISO 6107-9:1997 Part 9: Alphabetical list and subject index
  • ISO 6152:1982 Thermometers for use with alcoholometers and alcohol hydrometers
  • ISO 6160:1979 Programming languages - PL/1
  • ISO 6165:2012 Earth-moving machinery – Basic types – Identification and terms and definitions
  • ISO 6166:2013 Securities and related financial instruments – International securities identification numbering system (ISIN)
  • ISO 6173:1982 Open-end spinning machines – Vocabulary
  • Rotary-shaft lip-type seals incorporating elastomeric sealing elements
    • ISO 6194-2:2009 Part 2: Vocabulary
    • ISO 6194-5 Identification of visual imperfections
  • ISO 6196 Micrographics - Vocabulary
    • ISO 6196-1:1993 Part 1: General terms
    • ISO 6196-2:1993 Part 2: Image positions and methods of recording
    • ISO 6196-3:1997 Part 3: Film processing
    • ISO 6196-4:1998 Part 4: Materials and packaging
    • ISO 6196-5:1987 Part 5: Quality of images, legibility, inspection
    • ISO 6196-6:1992 Part 6: Equipment
    • ISO 6196-7:1992 Part 7: Computer micrographics
    • ISO 6196-8:1998 Part 8: Use
    • ISO 6196-10:1999 Part 10: Index
  • ISO 6206:1979 Chemical products for industrial use – Sampling – Vocabulary
  • ISO 6217:1982 Shipbuilding – Inland navigation – Pilot craft – Identification painting and inscriptions
  • ISO 6222:1999 Water quality – Enumeration of culturable micro-organisms – Colony count by inoculation in a nutrient agar culture medium
  • ISO 6284:1996 Construction drawings – Indication of limit deviations
  • ISO 6289:2003 Skis – Vocabulary
  • Calculation of load capacity of spur and helical gears
  • ISO 6344 Coated abrasives – Grain size analysis
  • ISO 6345:1990 Shipbuilding and marine structures – Windows and side scuttles – Vocabulary
  • ISO 6346 Freight containers – Coding, identification and marking
  • ISO 6348:1980 Textiles – Determination of mass – Vocabulary
  • ISO 6352:1985 Ferronickel - Determination of nickel content - Dimethylglyoxime gravimetric method
  • ISO 6357:1985 Documentation – Spine titles on books and other publications
  • ISO 6372:2017 Nickel and nickel alloys – Terms and definitions
  • ISO 6385:2016 Ergonomics principles in the design of work systems
  • ISO 6393:2008 Earth-moving machinery – Determination of sound power level – Stationary test conditions
  • ISO 6394:2008 Earth-moving machinery – Determination of emission sound pressure level at operator's position – Stationary test conditions
  • ISO 6395:2008 Earth-moving machinery – Determination of sound power level – Dynamic test conditions
  • ISO 6396:2008 Earth-moving machinery – Determination of emission sound pressure level at operator's position – Dynamic test conditions
  • ISO 6405 Earth-moving machinery - Symbols for operator controls and other displays
    • ISO 6405-1:2017 Part 1: Common symbols
    • ISO 6405-2:2017 Part 2: Symbols for specific machines, equipment and accessories
  • ISO 6410 Technical drawings – Screw threads and threaded parts
    • ISO 6410-1:1993 Part 1: General conventions
    • ISO 6410-2:1993 Part 2: Screw thread inserts
    • ISO 6410-3:1993 Part 3: Simplified representation
  • ISO 6411:1982 Technical drawings – Simplified representation of centre holes
  • ISO 6412 Technical drawings – Simplified representation of pipelines
    • ISO 6412-1:1989 Part 1: General rules and orthogonal representation
    • ISO 6412-2:1989 Part 2: Isometric projection
    • ISO 6412-3:1993 Part 3: Terminal features of ventilation and drainage systems
  • ISO 6413:1988 Technical drawings – Representation of splines and serrations
  • ISO 6414:1982 Technical drawings for glassware
  • ISO 6416:2017 Hydrometry – Measurement of discharge by the ultrasonic transit time (time of flight) method
  • ISO 6420:2016 Hydrometry – Position fixing equipment for hydrometric boats
  • ISO 6421:2012 Hydrometry – Methods for assessment of reservoir sedimentation
  • ISO 6422 Layout key for trade documents
    • ISO 6422-1:2010 Part 1: Paper-based documents
  • ISO 6425:1996 Divers' watches
  • ISO 6426 Horological vocabulary
    • ISO 6426-1:1982 Part 1: Technical and scientific definitions
    • ISO 6426-2:2002 Part 2: Technical and commercial definitions
  • ISO 6428:1982 Technical drawings – Requirements for microcopying
  • ISO/IEC 6429:1992 Information technology – Control functions for coded character sets
  • ISO 6433:2012 Technical product documentation – Part references
  • ISO 6438:1983 Documentation – African coded character set for bibliographic information interchange
  • ISO 6461 Water quality – Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia)
    • ISO 6461-1:1986 Part 1: Method by enrichment in a liquid medium
    • ISO 6461-2:1986 Part 2: Method by membrane filtration
  • ISO 6467:1980 Ferrovanadium - Determination of vanadium content - Potentiometric method
  • ISO 6472:2017 Rubber compounding ingredients – Abbreviated terms
  • ISO 6474 Implants for surgery – Ceramic materials
    • ISO 6474-1:2010 Part 1: Ceramic materials based on high purity alumina
    • ISO 6474-2:2012 Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement
  • ISO 6475:1989 Implants for surgery – Metal bone screws with asymmetrical thread and spherical under-surface – Mechanical requirements and test methods
  • ISO 6501:1988 Ferronickel - Specification and delivery requirements
  • ISO 6518 Road vehicles – Ignition systems
    • ISO 6518-1:2002 Part 1: Vocabulary
  • ISO/IEC 6522:1992 Information technology - Programming languages - PL/1 general purpose subset
  • ISO/IEC 6523 Information technology – Structure for the identification of organizations and organization parts
  • ISO 6531:2017 Machinery for forestry – Portable chain-saws – Vocabulary
  • ISO 6552:1980 Automatic steam traps - Definition of technical terms
  • Microbiology of the food chain – Horizontal method for the detection, enumeration and serotyping of Salmonella[Note 3]
    • ISO 6579-1:2017 Part 1: Detection of Salmonella spp.
    • ISO/TS 6579-2:2012 Part 2: Enumeration by a miniaturized most probable number technique
    • ISO/TR 6579-3:2014 Part 3: Guidelines for serotyping of Salmonella spp.
  • ISO 6586:1980 Data processing - Implementation of the ISO 7- bit and 8- bit coded character sets on punched cards
  • ISO 6590 Packaging – Sacks – Vocabulary and types
    • ISO 6590-1:1983 Part 1: Paper sacks
    • ISO 6590-2:1986 Part 2: Sacks made from thermoplastic flexible film
  • Cast iron drainage pipes and fittings – Spigot series
  • ISO 6596 Information processing – Data interchange on 130 mm (5.25 in) flexible disk cartridges using two-frequency recording at 7 958 ftprad, 1.9 tpmm (48 tpi), on one side
    • ISO 6596-1:1985 Part 1: Dimensional, physical and magnetic characteristics
    • ISO 6596-2:1985 Part 2: Track format
  • ISO 6611:2004 Milk and milk products – Enumeration of colony-forming units of yeasts and/or moulds – Colony-count technique at 25 degrees C
  • ISO 6621 Internal combustion engines – Piston rings
    • ISO 6621-1:2007 Part 1: Vocabulary
  • ISO 6630:1986 Documentation - Bibliographic control characters
  • ISO 6689 Equipment for harvesting – Combines and functional components
    • ISO 6689-1:1997 Part 1: Vocabulary
  • ISO 6706:1981 Plastics laboratory ware – Graduated measuring cylinders
  • ISO 6707 Buildings and civil engineering works – Vocabulary
    • ISO 6707-1:2014 Part 1: General terms
    • ISO 6707-2:2014 Part 2: Contract terms
    • ISO 6707-3:2017 Part 3: Sustainability terms
  • ISO 6709:2008 Standard representation of geographic point location by coordinates
  • ISO 6710:2017 Single-use containers for human venous blood specimen collection
  • ISO 6725:1981 Road vehicles – Dimensions of two-wheeled mopeds and motorcycles – Terms and definitions
  • ISO 6726:1988 Mopeds and motorcycles with two wheels – Masses – Vocabulary
  • ISO 6727:2012 Road vehicles - Motorcycles - Symbols for controls, indicators and tell-tales
  • ISO 6730:2005 Milk – Enumeration of colony-forming units of psychrotrophic microorganisms – Colony-count technique at 6,5 degrees C
  • ISO 6747:2013 Earth-moving machinery – Dozers – Terminology and commercial specifications
  • ISO 6780 Flat pallets for intercontinental materials handling — Principal dimensions and tolerances
  • ISO 6798:1995 Reciprocating internal combustion engines – Measurement of emitted airborne noise – Engineering method and survey method
  • ISO 6811:1998 Spherical plain bearings - Vocabulary
  • ISO 6813:1998 Road vehicles – Collision classification – Terminology
  • ISO 6814:2009 Machinery for forestry – Mobile and self-propelled machinery – Terms, definitions and classification
  • ISO 6861:1996 Information and documentation - Glagolitic alphabet coded character set for bibliographic information interchange
  • ISO 6862:1996 Information and documentation - Mathematical coded character set for bibliographic information interchange
  • ISO 6883:2017 Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air)
  • ISO 6887 Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination[Note 3]
    • ISO 6887-1:2017 Part 1: General rules for the preparation of the initial suspension and decimal dilutions
    • ISO 6887-2:2017 Part 2: Specific rules for the preparation of meat and meat products
    • ISO 6887-3:2017 Part 3: Specific rules for the preparation of fish and fishery products
    • ISO 6887-4:2017 Part 4: Specific rules for the preparation of miscellaneous products
    • ISO 6887-5:2010 Part 5: Specific rules for the preparation of milk and milk products
    • ISO 6887-6:2013 Part 6: Specific rules for the preparation of samples taken at the primary production stage
  • ISO 6888 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species)
    • ISO 6888-1:1999 Part 1: Technique using Baird-Parker agar medium
    • ISO 6888-2:1999 Part 2: Technique using rabbit plasma fibrinogen agar medium
    • ISO 6888-3:2003 Part 3: Detection and MPN technique for low numbers
  • ISO 6892 Metallic materials – Tensile testing
    • Method of test at room temperature
    • Method of test at elevated temperature
    • ISO 6892-3 Method of test at low temperature
    • ISO 6892-4 Method of test in liquid helium
  • ISO 6926:2016 Acoustics – Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
  • ISO 6927:2012 Buildings and civil engineering works – Sealants – Vocabulary
  • ISO 6929:2013 Steel products – Vocabulary
  • ISO 6936:1988 Information processing - Conversion between the two coded character sets of ISO 646 and ISO 6937-2 and the CCITT international telegraph alphabet No. 2 (ITA 2)
  • ISO/IEC 6937:2001 Information technology - Coded graphic character set for text communication - Latin alphabet
  • ISO 6938:2012 Textiles – Natural fibres – Generic names and definitions
  • Building components and building elements – Thermal resistance and thermal transmittance – Calculation method
  • ISO 6951:1986 Information processing - Processor system bus interface (Eurobus A)
  • ISO 6980 Nuclear energy - Reference beta-particle radiation
    • ISO 6980-1:2006 Part 1: Methods of production
    • ISO 6980-2:2004 Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
    • ISO 6980-3:2006 Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence
  • ISO 7000:2014 Graphical symbols for use on equipment - Registered symbols
  • ISO 7001:2007 Graphical symbols – Public information symbols
  • ISO 7002 Agricultural food products – Layout for a standard method of sampling from a lot
  • ISO 7010:2011 Graphical symbols - Safety colours and safety signs - Registered safety signs
  • ISO 7029:2017 Acoustics - Statistical distribution of hearing thresholds related to age and gender
  • ISO 7056:1981 Plastics laboratory ware – Beakers
  • ISO/IEC 7064:2003 Information technology - Security techniques - Check character systems
  • ISO 7065 Information processing – Data interchange on 200 mm (8 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on both sides
    • ISO 7065-1:1985 Part 1: Dimensional, physical and magnetic characteristics
    • ISO 7065-2:1985 Part 2: Track format
  • ISO 7066 Assessment of uncertainty in the calibration and use of flow measurement devices
    • ISO 7066-2:1988 Part 2: Non-linear calibration relationships
  • ISO 7078:1985 Building construction – Procedures for setting out, measurement and surveying – Vocabulary and guidance notes
  • ISO 7083:1983 Technical drawings – Symbols for geometrical tolerancing – Proportions and dimensions
  • ISO 7087:1984 Ferroalloys - Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
  • ISO 7088:1981 Fish-meal – Vocabulary
  • ISO 7098:2015 Information and documentation – Romanization of Chinese
  • ISO 7112:2017 Machinery for forestry – Portable brush-cutters and grass-trimmers – Vocabulary
  • ISO 7130:2013 Earth-moving machinery – Operator training – Content and methods
  • ISO 7131:2009 Earth-moving machinery – Loaders – Terminology and commercial specifications
  • ISO 7132:2003 Earth-moving machinery – Dumpers – Terminology and commercial specifications
  • ISO 7133:2013 Earth-moving machinery – Scrapers – Terminology and commercial specifications
  • ISO 7134:2013 Earth-moving machinery – Graders – Terminology and commercial specifications
  • ISO 7135:2009 Earth-moving machinery – Hydraulic excavators – Terminology and commercial specifications
  • ISO 7136:2006 Earth-moving machinery – Pipelayers – Terminology and commercial specifications
  • ISO 7137:1995 Aircraft - Environmental conditions and test procedures for airborne equipment
  • ISO 7144:1986 Documentation – Presentation of theses and similar documents
  • ISO 7151:1988 Surgical instruments – Non-cutting, articulated instruments – General requirements and test methods
  • ISO 7152:1997 Camping tents and caravan awnings – Vocabulary and list of equivalent terms
  • ISO 7153 Surgical instruments – Materials
    • ISO 7153-1:2016 Part 1: Metals
  • ISO 7154:1983 Documentation - Bibliographic filing principles
  • ISO 7176 Wheelchairs
    • ISO 7176-21:2009 Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers
    • ISO 7176-26:2007 Part 26: Vocabulary
  • ISO 7185:1990 Information technology - Programming languages - Pascal
  • ISO 7194:2008 Measurement of fluid flow in closed conduits – Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
  • ISO 7196:1995 Acoustics – Frequency-weighting characteristic for infrasound measurements
  • ISO 7197:2006 Neurosurgical implants – Sterile, single-use hydrocephalus shunts and components
  • ISO 7198:2016 Cardiovascular implants and extracorporeal systems – Vascular prostheses – Tubular vascular grafts and vascular patches
  • ISO 7199:2016 Cardiovascular implants and artificial organs – Blood-gas exchangers (oxygenators)
  • ISO 7200:2004 Technical product documentation – Data fields in title blocks and document headers
  • ISO 7206 Implants for surgery – Partial and total hip joint prostheses
    • ISO 7206-1:2008 Part 1: Classification and designation of dimensions
    • ISO 7206-2:2011 Part 2: Articulating surfaces made of metallic, ceramic and plastics materials
    • ISO 7206-4:2010 Part 4: Determination of endurance properties and performance of stemmed femoral components
    • ISO 7206-6:2013 Part 6: Endurance properties testing and performance requirements of neck region of stemmed femoral components
    • ISO 7206-10:2003 Part 10: Determination of resistance to static load of modular femoral heads
    • ISO 7206-12:2016 Part 12: Deformation test method for acetabular shells
    • ISO 7206-13:2016 Part 13: Determination of resistance to torque of head fixation of stemmed femoral components
  • ISO 7207 Implants for surgery – Components for partial and total knee joint prostheses
    • ISO 7207-1:2007 Part 1: Classification, definitions and designation of dimensions
    • ISO 7207-2:2011 Part 2: Articulating surfaces made of metal, ceramic and plastics materials
  • ISO 7216:2015 Agricultural and forestry tractors – Measurement of noise emitted when in motion
  • ISO 7218:2007 Microbiology of food and animal feeding stuffs – General requirements and guidance for microbiological examinations
  • ISO 7220:1996 Information and documentation - Presentation of catalogues of standards
  • ISO 7237:1993 Caravans – Masses and dimensions – Vocabulary
  • Fire detection and alarm systems
  • ISO 7251:2005 Microbiology of food and animal feeding stuffs – Horizontal method for the detection and enumeration of presumptive Escherichia coli – Most probable number technique
  • ISO 7255:1985 Shipbuilding – Active control units of ships – Vocabulary
  • ISO 7275:1985 Documentation – Presentation of title information of series
  • ISO 7287:2002 Graphical symbols for thermal cutting equipment
  • ISO 7294:1983 Saw teeth for woodworking saws – Profile shape – Terminology and designation
  • ISO 7296 Cranes - Graphic symbols
    • ISO 7296-1:1991 Part 1: General
    • ISO 7296-2:1996 Part 2: Mobile cranes
    • ISO 7296-3:2006 Part 3: Tower cranes
  • ISO 7297:1985 Information processing – Magnetic disk for data storage devices – 96 000 flux transitions per track, 200 mm (7.9 in) outer diameter, 63,5 mm (2.5 in) inner diameter
  • ISO 7298:1985 Information processing – Magnetic disk for data storage devices – 158 000 flux transitions per track, 210 mm (8.3 in) outer diameter, 100 mm (3.9 in) inner diameter
  • ISO 7345:1987 Thermal insulation – Physical quantities and definitions
  • ISO 7347:1987 Ferroalloys - Experimental methods for checking the bias of sampling and sample preparation
  • ISO 7348:1992 Glass containers – Manufacture – Vocabulary
  • ISO/IEC 7350:1991 Information technology - Registration of repertoires of graphic characters from ISO/IEC 10367
  • ISO 7369:2004 Pipework - Metal hoses and hose assemblies - Vocabulary
  • :2005 Trade data interchange - Trade data elements directory
  • ISO 7373:1987 Ferroalloys - Experimental methods for checking the precision of sample division
  • ISO 7376:2009 Anaesthetic and respiratory equipment – Laryngoscopes for tracheal intubation
  • ISO 7396 Medical gas pipeline systems
    • ISO 7396-1:2016 Part 1: Pipeline systems for compressed medical gases and vacuum
    • ISO 7396-2:2007 Part 2: Anaesthetic gas scavenging disposal systems
  • ISO 7404 Methods for the petrographic analysis of coals
    • ISO 7404-1:2016 Part 1: Vocabulary
  • ISO 7437:1990 Technical drawings – Construction drawings – General rules for execution of production drawings for prefabricated structural components
  • ISO 7462:1985 Shipbuilding - Principal ship dimensions - Terminology and definitions for computer applications
  • ISO 7478:1987 Information processing systems – Data communication – Multilink procedures
  • ISO/IEC 7480:1991 Information technology – Telecommunications and information exchange between systems – Start-stop transmission signal quality at DTE/DCE interfaces
  • ISO 7482 Raw goat skins
    • ISO 7482-1:1998 Part 1: Descriptions of defects
  • ISO/IEC 7487 Information technology – Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides – ISO type 202
    • ISO/IEC 7487-1:1993 Part 1: Dimensional, physical and magnetic characteristics
    • ISO 7487-2:1985 Part 2: Track format A
    • ISO 7487-3:1986 Part 3: Track format B
  • ISO/IEC 7498 Information technology — Open Systems Interconnection — Basic Reference Model[Note 3]
    • ISO/IEC 7498-1:1994 The Basic Model
    • ISO 7498-2:1989 Part 2: Security Architecture
    • ISO/IEC 7498-3:1997 Naming and addressing
    • ISO/IEC 7498-4:1989 Part 4: Management framework
  • Identification cards – Machine readable travel documents
  • ISO 7504:2015 Gas analysis – Vocabulary
  • ISO 7518:1983 Technical drawings – Construction drawings – Simplified representation of demolition and rebuilding
  • ISO 7519:1991 Technical drawings – Construction drawings – General principles of presentation for general arrangement and assembly drawings
  • ISO 7520:1985 Ferronickel - Determination of cobalt content - Flame atomic absorption spectrometric method
  • ISO 7524:1985 Nickel, ferronickel and nickel alloys - Determination of carbon content - Infra-red absorption method after induction furnace combustion
  • ISO 7526:1985 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Infra-red absorption method after induction furnace combustion
  • ISO 7527:1985 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Iodimetric titration method after induction furnace combustion
  • ISO 7550:1985 Laboratory glassware – Disposable micropipettes
  • ISO 7563:1998 Fresh fruits and vegetables – Vocabulary
  • ISO 7568:1986 Woodworking machines – Thickness planing machines with rotary cutterblock for one-side dressing – Nomenclature and acceptance conditions
  • ISO 7569:1986 Woodworking machines – Planing machines for two-, three- or four-side dressing – Nomenclature and acceptance conditions
  • ISO 7570:1986 Woodworking machines – Surface planing and thicknessing machines – Nomenclature and acceptance conditions
  • ISO 7571:1986 Woodworking machines – Surface planing machines with cutterblock for one-side dressing – Nomenclature and acceptance conditions
  • ISO 7573:2008 Technical product documentation – Parts lists
  • ISO 7574 Acoustics – Statistical methods for determining and verifying stated noise emission values of machinery and equipment
    • ISO 7574-1:1985 Part 1: General considerations and definitions
    • ISO 7574-2:1985 Part 2: Methods for stated values for individual machines
    • ISO 7574-3:1985 Part 3: Simple (transition) method for stated values for batches of machines
    • ISO 7574-4:1985 Part 4: Methods for stated values for batches of machines
  • ISO 7583:2013 Anodizing of aluminium and its alloys - Terms and definitions
  • ISO 7626 Mechanical vibration and shock – Experimental determination of mechanical mobility[Note 3]
    • ISO 7626-1:2011 Part 1: Basic terms and definitions, and transducer specifications
    • ISO 7626-2:2015 Part 2: Measurements using single-point translation excitation with an attached vibration exciter
    • ISO 7626-5:1994 Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
  • ISO 7637 Road vehicles – Electrical disturbances from conduction and coupling
    • ISO 7637-1:2015 Part 1: Definitions and general considerations
  • ISO 7639:1985 Road vehicles - Diagnostic systems - Graphical symbols
  • ISO 7665:1983 Information processing – File structure and labelling of flexible disk cartridges for information interchange
  • ISO 7692:1983 Ferrotitanium - Determination of titanium content - Titrimetric method
  • ISO 7693:1984 Ferrotungsten - Determination of tungsten content - Cinchonine gravimetric method
  • ISO 7704:1985 Water quality – Evaluation of membrane filters used for microbiological analyses
  • ISO 7711 Dentistry – Diamond rotary instruments
    • ISO 7711-3:2004 Part 3: Grit sizes, designation and colour code
  • ISO 7712:1983 Laboratory glassware – Disposable Pasteur pipettes
  • ISO 7736 Road vehicles – Car radio for front installation – Installation space including connections
  • ISO 7740:1985 Instruments for surgery – Scalpels with detachable blades – Fitting dimensions
  • ISO 7741:1986 Instruments for surgery – Scissors and shears – General requirements and test methods
  • ISO/IEC 7776:1995 Information technology – Telecommunications and information exchange between systems – High-level data link control procedures – Description of the X.25 LAPB-compatible DTE data link procedures
  • ISO 7779:2010 Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment
  • ISO/IEC 7810 Identification cards – Physical characteristics
  • ISO/IEC 7811 Identification cards – Recording technique
  • ISO/IEC 7812 Identification cards – Identification of issuers
  • ISO/IEC 7813:2006 Information technology – Identification cards – Financial transaction cards
  • ISO/IEC 7816 Identification cards – Integrated circuit cards[Note 3]
  • ISO 7839:2005 Textile machinery and accessories – Knitting machines – Vocabulary and classification
  • ISO/TS 7849 Acoustics – Determination of airborne sound power levels emitted by machinery using vibration measurement
    • ISO/TS 7849-1:2009 Part 1: Survey method using a fixed radiation factor
    • ISO/TS 7849-2:2009 Part 2: Engineering method including determination of the adequate radiation factor
  • ISO 7863:1984 Height setting micrometers and riser blocks
  • ISO 7864:2016 Sterile hypodermic needles for single use – Requirements and test methods
  • ISO 7870 Control charts
    • ISO 7870-1:2014 Part 1: General guidelines
    • ISO 7870-2:2013 Part 2: Shewhart control charts
    • ISO 7870-3:2012 Part 3: Acceptance control charts
    • ISO 7870-4:2011 Part 4: Cumulative sum charts
    • ISO 7870-5:2014 Part 5: Specialized control charts
    • ISO 7870-6:2016 Part 6: EWMA control charts
    • ISO 7870-8:2017 Part 8: Charting techniques for short runs and small mixed batches
  • ISO 7876 Fuel injection equipment – Vocabulary
    • ISO 7876-1:1990 Part 1: Fuel injection pumps
    • ISO 7876-2:1991 Part 2: Fuel injectors
    • ISO 7876-3:1993 Part 3: Unit injectors
    • ISO 7876-4:2004 Part 4: High-pressure pipes and end-connections
    • ISO 7876-5:2004 Part 5: Common rail fuel injection system
  • ISO 7885:2010 Dentistry – Sterile injection needles for single use
  • ISO 7886 Sterile hypodermic syringes for single use
    • ISO 7886-1:2017 Part 1: Syringes for manual use
    • ISO 7886-2:1996 Part 2: Syringes for use with power-driven syringe pumps
    • ISO 7886-3:2005 Part 3: Auto-disable syringes for fixed-dose immunization
    • ISO 7886-4:2006 Part 4: Syringes with re-use prevention feature
  • ISO 7889:2003 Yogurt – Enumeration of characteristic microorganisms – Colony-count technique at 37 degrees C
  • ISO 7899 Water quality – Detection and enumeration of intestinal enterococci
    • ISO 7899-1:1998 Part 1: Miniaturized method (Most Probable Number) for surface and waste water
    • ISO 7899-2:2000 Part 2: Membrane filtration method
  • ISO 7919 Mechanical vibration – Evaluation of machine vibration by measurements on rotating shafts
    • ISO 7919-3:2009 Part 3: Coupled industrial machines
    • ISO 7919-4:2009 Part 4: Gas turbine sets with fluid-film bearings
    • ISO 7919-5:2005 Part 5: Machine sets in hydraulic power generating and pumping plants
  • ISO 7929:1985 Information processing – Magnetic disk for data storage devices – 83 000 flux transitions per track, 130 mm (5.12 in) outer diameter, 40 mm (1.57 in) inner diameter
  • ISO 7932:2004 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of presumptive Bacillus cereus – Colony-count technique at 30 degrees C
  • ISO 7937:2004 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of Clostridium perfringens – Colony-count technique
  • ISO/IEC 7942 Information technology – Computer graphics and image processing – Graphical Kernel System (GKS)
  • ISO 7944:1998 Optics and optical instruments - Reference wavelengths
  • ISO 7945:1985 Woodworking machines – Single spindle boring machines – Nomenclature and acceptance conditions
  • ISO 7946:1985 Woodworking machines – Slot mortising machines – Nomenclature and acceptance conditions
  • ISO 7947:1985 Woodworking machines – Two-, three- and four-side moulding machines – Nomenclature and acceptance conditions
  • ISO 7948:1987 Woodworking machines – Routing machines – Nomenclature and acceptance conditions
  • ISO 7949:1985 Woodworking machines – Veneer pack edge shears – Nomenclature and acceptance conditions
  • ISO 7950:1985 Woodworking machines – Single chain mortising machines – Nomenclature and acceptance conditions
  • ISO 7957:1987 Woodworking machines – Radial circular saws – Nomenclature and acceptance conditions
  • ISO 7958:1987 Woodworking machines – Single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels – Nomenclature and acceptance conditions
  • ISO 7959:1987 Woodworking machines – Double edging precision circular sawing machines – Nomenclature and acceptance conditions
  • ISO 7960:1995 Airborne noise emitted by machine tools – Operating conditions for woodworking machines
  • ISO 7967 Reciprocating internal combustion engines - Vocabulary of components and systems
    • ISO 7967-1:2005 Part 1: Structure and external covers
    • ISO 7967-2:2010 Part 2: Main running gear
    • ISO 7967-3:2010 Part 3: Valves, camshaft drives and actuating mechanisms
    • ISO 7967-4:2005 Part 4: Pressure charging and air/exhaust gas ducting systems
    • ISO 7967-5:2010 Part 5: Cooling systems
    • ISO 7967-6:2005 Part 6: Lubricating systems
    • ISO 7967-7:2005 Part 7: Governing systems
    • ISO 7967-8:2005 Part 8: Starting systems
    • ISO 7967-9:2010 Part 9: Control and monitoring systems
    • ISO 7967-10:2014 Part 10: Ignition systems
    • ISO 7967-11:2014 Part 11: Fuel systems
    • ISO 7967-12:2014 Part 12: Exhaust emission control systems
  • ISO 7983:1988 Woodworking machines – Single blade circular sawing machines with travelling table – Nomenclature and acceptance conditions
  • ISO 7987:1985 Woodworking machines – Turning lathes – Nomenclature and acceptance conditions
  • ISO 7988:1988 Woodworking machines – Double-end tenoning machines – Nomenclature and acceptance conditions
  • ISO 7998:2005 Ophthalmic optics - Spectacle frames - Lists of equivalent terms and vocabulary
  • ISO 8000 Data quality
  • ISO 8002:1986 Mechanical vibrations – Land vehicles – Method for reporting measured data
  • :2011 Geometrical product specifications (GPS) – Fundamentals – Concepts, principles and rules
  • ISO 8041:2005 Human response to vibration - Measuring instrumentation
    • ISO 8041-1:2017 Part 1: General purpose vibration meters
  • ISO 8042:1988 Shock and vibration measurements – Characteristics to be specified for seismic pick-ups
  • ISO 8044:2015 Corrosion of metals and alloys – Basic terms and definitions
  • ISO 8048:1984 Technical drawings – Construction drawings – Representation of views, sections and cuts
  • ISO 8049:2016 Ferronickel shot - Sampling for analysis
  • ISO 8050:1988 Ferronickel ingots or pieces - Sampling for analysis
  • ISO 8062 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts
    • ISO 8062-1:2007 Part 1: Vocabulary
    • ISO/TS 8062-2:2013 Part 2: Rules
    • ISO 8062-3:2007 Part 3: General dimensional and geometrical tolerances and machining allowances for castings
    • ISO 8062-4:2017 Part 4: General tolerances for castings using profile tolerancing in a general datum system
  • ISO 8063 Information processing – Data interchange on 6,30 mm (0.25 in) wide magnetic tape cartridge using IMFM recording at 252 ftpmm (6 400 ftpi)
    • ISO 8063-1:1986 Part 1: Mechanical, physical and magnetic properties
    • ISO 8063-2:1986 Part 2: Track format and method of recording for data interchange in start/stop mode
  • ISO 8064:1985 Information processing – Reels for 12,7 mm (0,5 in) wide magnetic tapes – Sizes 16, 18 and 22
  • ISO/IEC 8072:1996 Information technology – Open systems interconnection – Transport service definition
  • ISO/IEC 8073:1997 Information technology – Open Systems Interconnection – Protocol for providing the connection-mode transport service
  • ISO 8088:1994 Equipment for olive cultivation and olive oil production – Vocabulary
  • :1990 Cycles – Terminology
  • ISO 8107:1993 Nuclear power plants - Maintainability - Terminology
  • ISO 8109:1990 Banking and related financial services – Securities – Format of Eurobonds
  • ISO 8114:1990 Textile machinery and accessories – Spindles for ring-spinning and doubling machines – List of equivalent terms
  • ISO 8116 Textile machinery and accessories – Beams for winding
    • ISO 8116-1:1995 Part 1: General vocabulary
  • ISO 8119 Textile machinery and accessories – Needles for knitting machines – Terminology
    • ISO 8119-1:1989 Part 1: Latch-type needles
    • ISO 8119-2:1989 Part 2: Bearded needles
    • ISO 8119-3:1992 Part 3: Compound needles
  • ISO 8147:1995 Shipbuilding and marine structures – Derrick rigs and component parts – Vocabulary
  • ISO 8152:1984 Earth-moving machinery – Operation and maintenance – Training of mechanics
  • ISO 8153 Aerospace fluid systems and components – Vocabulary
    • ISO 8153-1:2009 Part 1: Hose assemblies
  • ISO 8157:2015 Fertilizers and soil conditioners – Vocabulary
  • ISO 8159:1987 Textiles – Morphology of fibres and yarns – Vocabulary
  • ISO 8160:1987 Textiles – Textured filament yarns – Vocabulary
  • ISO 8178 Reciprocating internal combustion engines - Exhaust emission measurement
  • Ductile iron pipelines – Polyethylene sleeving for site application
  • ISO 8199:2005 Water quality – General guidance on the enumeration of micro-organisms by culture
  • ISO/IEC 8208:2000 Information technology – Data communications – X.25 Packet Layer Protocol for Data Terminal Equipment
  • ISO/IEC 8211:1994 Information technology - Specification for a data descriptive file for information interchange
  • ISO 8217:2017 Petroleum products - Fuels (class F) - Specifications of marine fuels
  • ISO 8229:1991 Operations and baths relating to dry-cleaning machines – Vocabulary
  • ISO 8277:2013 Ships and marine technology – Pipework and machinery – Information transfer
  • ISO 8297:1994 Acoustics – Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment – Engineering method
  • ISO 8316:1987 Measurement of liquid flow in closed conduits – Method by collection of the liquid in a volumetric tank
  • ISO 8317:2015 Child-resistant packaging - Requirements and testing procedures for reclosable packages
  • ISO 8319 Orthopaedic instruments – Drive connections
    • ISO 8319-1:1996 Part 1: Keys for use with screws with hexagon socket heads
    • ISO 8319-2:1986 Part 2: Screwdrivers for single slot head screws, screws with cruciate slot and cross-recessed head screws
  • ISO/IEC 8326:1996 Information technology – Open Systems Interconnection – Session service definition
  • ISO/IEC 8327 Information technology – Open Systems Interconnection – Connection-oriented Session protocol
  • ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary
  • ISO 8333:1985 Liquid flow measurement in open channels by weirs and flumes – V-shaped broad-crested weirs
  • ISO 8343:1985 Ferronickel - Determination of silicon content - Gravimetric method
  • ISO/IEC 8348:2002 Information technology – Open Systems Interconnection – Network service definition
  • ISO 8362 Injection containers and accessories
    • ISO 8362-1:2009 Part 1: Injection vials made of glass tubing
    • ISO 8362-2:2015 Part 2: Closures for injection vials
    • ISO 8362-3:2001 Part 3: Aluminium caps for injection vials
    • ISO 8362-4:2011 Part 4: Injection vials made of moulded glass
    • ISO 8362-5:2016 Part 5: Freeze drying closures for injection vials
    • ISO 8362-6:2010 Part 6: Caps made of aluminium-plastics combinations for injection vials
    • ISO 8362-7:2006 Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
  • ISO 8368:1999 Hydrometric determinations – Flow measurements in open channels using structures – Guidelines for selection of structure
  • ISO 8373:2012 Manipulating industrial robots – Vocabulary
  • ISO 8378 Information processing – Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on both sides
    • ISO 8378-1:1986 Part 1: Dimensional, physical and magnetic characteristics
    • ISO 8378-2:1986 Part 2: Track format A
    • ISO 8378-3:1986 Part 3: Track format B
  • ISO 8384:2000 Ships and marine technology – Dredgers – Vocabulary
  • ISO 8388:1998 Knitted fabrics – Types – Vocabulary
  • ISO 8421 Fire protection - Vocabulary
    • ISO 8421-1:1987 Part 1: General terms and phenomena of fire
    • ISO 8421-2:1987 Part 2: Structural fire protection
    • ISO 8421-6:1987 Part 6: Evacuation and means of escape
    • ISO 8421-7:1987 Part 7: Explosion detection and suppression means
  • ISO 8422:2006 Sequential sampling plans for inspection by attributes
  • ISO 8423:2008 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
  • ISO 8429:1986 Optics and optical instruments – Ophthalmology – Graduated dial scale
  • ISO 8439:1990 Forms design - Basic layout
  • ISO 8440:1986 Location of codes in trade documents
  • ISO/IEC 8441 Information technology – High density digital recording (HDDR)
    • ISO/IEC 8441-1:1991 Part 1: Unrecorded magnetic tape for (HDDR) applications
    • ISO/IEC 8441-2:1991 Part 2: Guide for interchange practice
  • ISO 8459:2009 Information and documentation - Bibliographic data element directory for use in data exchange and enquiry
  • ISO 8462 Information processing – Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge using GCR recording at 394 ftpmm (10 000 ftpi), 39 cpmm (1 000 cpi)
    • ISO 8462-1:1986 Part 1: Mechanical, physical and magnetic properties
    • ISO 8462-2:1986 Part 2: Streaming mode
  • ISO/IEC 8473 Information technology – Protocol for providing the connectionless-mode network service
    • ISO/IEC 8473-1:1998 Protocol specification
    • ISO/IEC 8473-2:1996 Part 2: Provision of the underlying service by an ISO/IEC 8802 subnetwork
    • ISO/IEC 8473-3:1995 Provision of the underlying service by an X.25 subnetwork
    • ISO/IEC 8473-4:1995 Provision of the underlying service by a subnetwork that provides the OSI data link service
    • ISO/IEC 8473-5:1997 Provision of the underlying service by ISDN circuit-switched B-channels
  • ISO/IEC 8480:1995 Information technology – Telecommunications and information exchange between systems – DTE/DCE interface back-up control operation using ITU-T Recommendation V.24 interchange circuits
  • ISO/IEC 8481:1996 Information technology – Telecommunications and information exchange between systems – DTE to DTE direct connections
  • ISO/IEC 8482:1993 Information technology – Telecommunications and information exchange between systems – Twisted pair multipoint interconnections
  • ISO/IEC 8484:2014 Information technology – Magnetic stripes on savingsbooks
  • ISO 8485:1989 Programming languages - APL
  • ISO 8498:1990 Woven fabrics – Description of defects – Vocabulary
  • ISO 8499:2003 Knitted fabrics – Description of defects – Vocabulary
  • Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness
    • ISO 8501-1:2007 Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
    • ISO 8501-2:1994 Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
    • ISO 8501-3:2006 Part 3: Preparation grades of welds, edges and other areas with surface imperfections
    • ISO 8501-4:2006 Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
  • ISO 8502 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness
    • ISO 8502-2:2017 Part 2: Laboratory determination of chloride on cleaned surfaces
    • ISO 8502-3:2017 Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
    • ISO 8502-4:2017 Part 4: Guidance on the estimation of the probability of condensation prior to paint application
    • ISO 8502-5:1998 Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method
    • ISO 8502-6:2006 Part 6: Extraction of soluble contaminants for analysis - The Bresle method
    • ISO 8502-9:1998 Part 9: Field method for the conductometric determination of water-soluble salts
    • ISO 8502-11:2006 Part 11: Field method for the turbidimetric determination of water-soluble sulfate
  • ISO 8503 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates
    • ISO 8503-1:2012 Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
    • ISO 8503-2:2012 Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure
    • ISO 8503-3:2012 Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Focusing microscope procedure
    • ISO 8503-4:2012 Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure
    • ISO 8503-5:2017 Part 5: Replica tape method for the determination of the surface profile
  • ISO 8504 Preparation of steel substrates before application of paints and related products - Surface preparation methods
    • ISO 8504-1:2000 Part 1: General principles
    • ISO 8504-2:2000 Part 2: Abrasive blast-cleaning
    • ISO 8504-3:1993 Part 3: Hand- and power-tool cleaning
  • ISO 8512 Surface plates
    • ISO 8512-1:1990 Part 1: Cast iron
    • ISO 8512-2:1990 Part 2: Granite
  • ISO/TR 8517:1988 Rubber- or plastics-covered rollers – Glossary
  • ISO 8525:2008 Airborne noise emitted by machine tools – Operating conditions for metal-cutting machines
  • ISO 8528 Reciprocating internal combustion engine driven alternating current generating sets
    • ISO 8528-1:2005 Part 1: Application, ratings and performance
    • ISO 8528-2:2005 Part 2: Engines
    • ISO 8528-3:2005 Part 3: Alternating current generators for generating sets
    • ISO 8528-4:2005 Part 4: Controlgear and switchgear
    • ISO 8528-5:2013 Part 5: Generating sets
    • ISO 8528-6:2005 Part 6: Test methods
    • ISO 8528-7:2017 Part 7: Technical declarations for specification and design
    • ISO 8528-8:2016 Part 8: Requirements and tests for low-power generating sets
    • ISO 8528-9:2017 Part 9: Measurement and evaluation of mechanical vibrations
    • ISO 8528-10:1998 Part 10: Measurement of airborne noise by the enveloping surface method
    • ISO 8528-12:1997 Part 12: Emergency power supply to safety services
    • ISO 8528-13:2016 Part 13: Safety
  • ISO 8529 Reference neutron radiations
    • ISO 8529-1:2001 Part 1: Characteristics and methods of production
    • ISO 8529-2:2000 Part 2: Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field
    • ISO 8529-3:1998 Part 3: Calibration of area and personal dosimeters and determination of response as a function of energy and angle of incidence
  • ISO 8532:1995 Securities – Format for transmission of certificate numbers
  • ISO 8536 Infusion equipment for medical use
    • ISO 8536-1:2011 Part 1: Infusion glass bottles
    • ISO 8536-2:2010 Part 2: Closures for infusion bottles
    • ISO 8536-3:2009 Part 3: Aluminium caps for infusion bottles
    • ISO 8536-4:2010 Part 4: Infusion sets for single use, gravity feed
    • ISO 8536-5:2004 Part 5: Burette infusion sets for single use, gravity feed
    • ISO 8536-6:2016 Part 6: Freeze drying closures for infusion bottles
    • ISO 8536-7:2009 Part 7: Caps made of aluminium-plastics combinations for infusion bottles
    • ISO 8536-8:2015 Part 8: Infusion sets for single use with pressure infusion apparatus
    • ISO 8536-9:2015 Part 9: Fluid lines for single use with pressure infusion equipment
    • ISO 8536-10:2015 Part 10: Accessories for fluid lines for single use with pressure infusion equipment
    • ISO 8536-11:2015 Part 11: Infusion filters for single use with pressure infusion equipment
    • ISO 8536-12:2007 Part 12: Check valves
    • ISO 8536-13:2016 Part 13: Graduated flow regulators for single use with fluid contact
    • ISO 8536-14:2016 Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact
  • ISO 8537:2016 Sterile single-use syringes, with or without needle, for insulin
  • ISO 8540:1993 Open front mechanical power presses - Vocabulary
  • ISO 8548 Prosthetics and orthotics – Limb deficiencies
    • ISO 8548-1:1989 Part 1: Method of describing limb deficiencies present at birth
    • ISO 8548-2:1993 Part 2: Method of describing lower limb amputation stumps
    • ISO 8548-3:1993 Part 3: Method of describing upper limb amputation stumps
    • ISO 8548-4:1998 Part 4: Description of causal conditions leading to amputation
    • ISO 8548-5:2003 Part 5: Description of the clinical condition of the person who has had an amputation
  • ISO 8549 Prosthetics and orthotics - Vocabulary
    • ISO 8549-1:1989 Part 1: General terms for external limb prostheses and external orthoses
    • ISO 8549-2:1989 Part 2: Terms relating to external limb prostheses and wearers of these prostheses
    • ISO 8549-3:1989 Part 3: Terms relating to external orthoses
    • ISO 8549-4:2014 Part 4: Terms relating to limb amputation
  • ISO/TR 8550 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots
    • ISO/TR 8550-1:2007 Part 1: Acceptance sampling
    • ISO/TR 8550-2:2007 Part 2: Sampling by attributes
    • ISO/TR 8550-3:2007 Part 3: Sampling by variables
  • ISO 8551:2003 Prosthetics and orthotics – Functional deficiencies – Description of the person to be treated with an orthosis, clinical objectives of treatment, and functional requirements of the orthosis
  • ISO 8552:2004 Milk – Estimation of psychrotrophic microorganisms – Colony-count technique at 21 degrees C (Rapid method)
  • ISO 8553:2004 Milk – Enumeration of microorganisms – Plate-loop technique at 30 degrees C
  • ISO 8559:1989 Garment construction and anthropometric surveys – Body dimensions [Withdrawn: replaced by ISO 8559-1:2017]
  • ISO 8559 Size designation of clothes
    • ISO 8559-1:2017 Part 1: Anthropometric definitions for body measurement
    • ISO 8559-2:2017 Part 2: Primary and secondary dimension indicators
  • ISO 8560:1986 Technical drawings – Construction drawings – Representation of modular sizes, lines and grids
  • ISO 8568:2007 Mechanical shock – Testing machines – Characteristics and performance
  • ISO 8571 Information processing systems - Open Systems Interconnection - File Transfer, Access and Management
    • ISO 8571-1:1988 Part 1: General introduction
    • ISO 8571-2:1988 Part 2: Virtual Filestore Definition
    • ISO 8571-3:1988 Part 3: File Service Definition
    • ISO 8571-4:1988 Part 4: File Protocol Specification
    • ISO/IEC 8571-5:1990 Part 5: Protocol Implementation Conformance Statement Proforma
  • ISO 8573 Compressed air
    • ISO 8573-1:2010 Contaminants and purity classes
    • ISO 8573-2:2007 Test methods for oil aerosol content
    • ISO 8573-3:1999 Test methods for measurement of humidity
    • ISO 8573-4:2001 Test methods for solid particle content
    • ISO 8573-5:2001 Test methods for oil vapour and organic solvent content
    • ISO 8573-6:2003 Test methods for gaseous contaminant content
    • ISO 8573-7:2003 Test method for viable microbiological contaminant content
    • ISO 8573-8:2004 Test methods for solid particle content by mass concentration
    • ISO 8573-9:2004 Test methods for liquid water content
  • ISO 8579 Acceptance code for gear units
    • ISO 8579-1:2002 Part 1: Test code for airborne sound
  • ISO 8583 Financial transaction card originated messages – Interchange message specifications
  • ISO 8586:2012 Sensory analysis – General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors
  • ISO 8596:2009 Ophthalmic optics – Visual acuity testing – Standard optotype and its presentation
  • ISO 8598 Optics and optical instruments – Focimeters
    • ISO 8598-1:2014 Part 1: General purpose instruments
  • ISO 8600 Endoscopes – Medical endoscopes and endotherapy devices[Note 3]
    • ISO 8600-1:2015 Part 1: General requirements
    • ISO 8600-2:2015 Part 2: Particular requirements for rigid bronchoscopes
    • ISO 8600-3:1997 Part 3: Determination of field of view and direction of view of endoscopes with optics
    • ISO 8600-4:2014 Part 4: Determination of maximum width of insertion portion
    • ISO 8600-5:2005 Part 5: Determination of optical resolution of rigid endoscopes with optics
    • ISO 8600-6:2005 Part 6: Vocabulary
    • ISO 8600-7:2012 Part 7: Basic requirements for medical endoscopes of water-resistant type
  • ISO 8601:2004 Data elements and interchange formats – Information interchange – Representation of dates and times
  • ISO/IEC 8602:1995 Information technology – Protocol for providing the OSI connectionless-mode transport service
  • ISO 8604:1988 Plastics – Prepregs – Definitions of terms and symbols for designations
  • ISO 8608:2016 Mechanical vibration – Road surface profiles – Reporting of measured data
  • ISO 8612:2009 Ophthalmic instruments – Tonometers
  • ISO/IEC 8613 Information technology – Open Document Architecture (ODA) and interchange format
  • ISO 8614:1997 Ski bindings – Vocabulary
  • ISO 8615:1991 Implants for surgery – Fixation devices for use in the ends of the femur in adults
  • ISO 8624:2011 Ophthalmic optics – Spectacle frames – Measuring system and terminology
  • ISO 8625 Aerospace – Fluid systems – Vocabulary
    • ISO 8625-1:1993 Part 1: General terms and definitions related to pressure
    • ISO 8625-2:1991 Part 2: General terms and definitions relating to flow
    • ISO 8625-3:1991 Part 3: General terms and definitions relating to temperature
    • ISO 8625-4:2011 Part 4: General terms and definitions relating to control/actuation systems
  • ISO 8626:1989 Servo-hydraulic test equipment for generating vibration – Method of describing characteristics
  • ISO 8630 Information processing – Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks on each side
    • ISO 8630-1:1987 Part 1: Dimensional, physical and magnetic characteristics
    • ISO 8630-2:1987 Part 2: Track format A for 77 tracks
    • ISO 8630-3:1987 Part 3: Track format B for 80 tracks
  • ISO/IEC 8631:1989 Information technology - Program constructs and conventions for their representation
  • ISO/IEC 8632 Information technology – Computer graphics – Metafile for the storage and transfer of picture description information
    • ISO/IEC 8632-1:1999 Part 1: Functional specification
    • ISO/IEC 8632-2:1992 Part 2: Character encoding [withdrawn 2001-06-21]
    • ISO/IEC 8632-3:1999 Part 3: Binary encoding
    • ISO/IEC 8632-4:1999 Part 4: Clear text encoding
  • ISO 8637:2010 Cardiovascular implants and extracorporeal systems – Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
  • ISO 8638:2010 Cardiovascular implants and extracorporeal systems – Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters
  • ISO 8640 Textile machinery and accessories – Flat warp knitting machines[Note 3]
    • ISO 8640-1:2004 Part 1: Vocabulary of basic structure and knitting elements
    • ISO 8640-2:2004 Part 2: Vocabulary of warp let-off, fabric take-up and batching
    • ISO 8640-3:2002 Part 3: Vocabulary of patterning devices
    • ISO 8640-4:1996 Part 4: Stitch bonding machines and stitch bonding devices
  • ISO 8648:1988 Information processing systems – Open Systems Interconnection – Internal organization of the Network Layer
  • ISO/IEC 8650 Information technology – Open Systems Interconnection – Protocol specification for the Association Control Service Element
    • ISO/IEC 8650-2:1997 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO 8651 Information technology – Computer graphics – Graphical Kernel System (GKS) language bindings[Note 3]
    • ISO 8651-1:1988 Part 1: FORTRAN
    • ISO 8651-2:1988 Part 2: Pascal
    • ISO 8651-3:1988 Part 3: Ada
    • ISO/IEC 8651-4:1995 Part 4: C
  • ISO/IEC 8652:2012 Information technology – Programming languages – Ada
  • :1986 JewelleryRing-sizes – Definition, measurement and designation
  • ISO 8655 Piston-operated volumetric apparatus
    • ISO 8655-1:2002 Part 1: Terminology, general requirements and user recommendations
    • ISO 8655-2:2002 Part 2: Piston pipettes
    • ISO 8655-3:2002 Part 3: Piston burettes
    • ISO 8655-4:2002 Part 4: Dilutors
    • ISO 8655-5:2002 Part 5: Dispensers
    • ISO 8655-6:2002 Part 6: Gravimetric methods for the determination of measurement error
    • ISO 8655-7:2005 Part 7: Non-gravimetric methods for the assessment of equipment performance
  • ISO 8669 Urine collection bags
    • ISO 8669-1:1988 Part 1: Vocabulary
  • ISO 8670 Ostomy collection bags
    • ISO 8670-1:1988 Part 1: Vocabulary
  • ISO 8691 Petroleum products – Low levels of vanadium in liquid fuels – Determination by flameless atomic absorption spectrometry after ashing
  • ISO 8695:2010 Tools for pressing - Punches - Nomenclature and terminology
  • ISO/TR 8713:2012 Electrically propelled road vehicles – Vocabulary
  • ISO 8769:2016 Reference sources - Calibration of surface contamination monitors - Alpha-, beta- and photon emitters
  • ISO 8777:1993 Information and documentation - Commands for interactive text searching
  • ISO 8784 Pulp, paper and board – Microbiological examination
    • ISO 8784-1:2014 Part 1: Enumeration of bacteria and bacterial spores based on disintegration
  • ISO 8785:1998 Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters
  • ISO 8790:1987 Information processing systems - Computer system configuration diagram symbols and conventions
  • ISO/IEC 8802 Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Specific requirements
    • ISO/IEC/IEEE 8802-A:2015 Part A: Overview and architecture
    • ISO/IEC TR 8802-1:2001 Part 1: Overview of Local Area Network Standards
    • ISO/IEC/IEEE 8802-1Q:2016 Part 1Q: Bridges and bridged networks
    • ISO/IEC/IEEE 8802-1X:2013 Part 1X: Port-based network access control
    • ISO/IEC/IEEE 8802-1AB:2017 Part 1AB: Station and media access control connectivity discovery
    • ISO/IEC/IEEE 8802-1AE:2013 Part 1AE: Media access control (MAC) security
    • ISO/IEC/IEEE 8802-1AR:2014 Part 1AR: Secure device identity
    • ISO/IEC/IEEE 8802-1AS:2014 Part 1AS: Timing and synchronization for time-sensitive applications in bridged local area networks
    • ISO/IEC/IEEE 8802-1AX:2016 Part 1AX: Link aggregation
    • ISO/IEC/IEEE 8802-1BA:2016 Part 1BA: Audio video bridging (AVB) systems
    • ISO/IEC/IEEE 8802-1BR:2016 Part 1BR: Virtual bridged local area networks – Bridge port extension
    • ISO/IEC 8802-2:1998 Part 2: Logical link control
    • ISO/IEC/IEEE 8802-3:2017 Part 3: Standard for Ethernet
    • ISO/IEC/IEEE 8802-3-1:2015 Part 3-1: Standard for management information base (MIB) – Definitions for Ethernet
    • ISO/IEC 8802-5:1998 Part 5: Token ring access method and physical layer specifications
    • ISO/IEC/IEEE 8802-11:2012 Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications
    • ISO/IEC/IEEE 8802-15-4:2010 Part 15-4: Wireless medium access control (MAC) and physical layer (PHY) specifications for low-rate wireless personal area networks (WPANs)
    • ISO/IEC/IEEE 8802-22:2015 Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands
  • ISO 8805 Information processing systems – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) functional description
  • ISO/IEC 8806 Information technology – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) language bindings
    • ISO/IEC 8806-4 Part 4: C
  • ISO 8807:1989 Information processing systems – Open Systems Interconnection – LOTOS – A formal description technique based on the temporal ordering of observational behaviour
  • ISO 8811:2000 Earth-moving machinery – Rollers and compactors – Terminology and commercial specifications
  • ISO 8812:2016 Earth-moving machinery – Backhoe loaders – Terminology and commercial specifications
  • ISO 8815:1994 Aircraft – Electrical cables and cable harnesses – Vocabulary
  • ISO/IEC 8822:1994 Information technology – Open Systems Interconnection – Presentation service definition
  • ISO/IEC 8823 Information technology – Open Systems Interconnection – Connection-oriented presentation protocol
    • ISO/IEC 8823-1:1994 Protocol specification
    • ISO/IEC 8823-2:1997 Protocol Implementation Conformance Statement (PICS) proforma
  • Information technology – Abstract Syntax Notation One (ASN.1)
    • ISO/IEC 8824-1:2015 Specification of basic notation
    • ISO/IEC 8824-2:2015 Information object specification
    • ISO/IEC 8824-3:2015 Constraint specification
    • ISO/IEC 8824-4:2015 Parameterization of ASN.1 specifications
  • Information technology – ASN.1 encoding rules
  • ISO 8826 Technical drawings – Rolling bearings
    • ISO 8826-1:1989 Part 1: General simplified representation
    • ISO 8826-2:1994 Part 2: Detailed simplified representation
  • ISO 8827:1988 Implants for surgery – Staples with parallel legs for orthopaedic use – General requirements
  • ISO 8828:2014 Implants for surgery – Guidance on care and handling of orthopaedic implants
  • ISO 8835 Inhalational anaesthesia systems
    • ISO 8835-7:2011 Part 7: Anaesthetic systems for use in areas with limited logistical supplies of electricity and anaesthetic gases
  • ISO 8836:2014 Suction catheters for use in the respiratory tract
  • ISO 8843:2005 Aircraft – Crimp-removable contacts for electrical connectors – Identification system
  • ISO 8855:2011 Road vehicles – Vehicle dynamics and road-holding ability – Vocabulary
  • ISO/IEC 8859 Information technology – 8-bit single-byte coded graphic character sets
  • ISO 8860 Information processing – Data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad on 80 tracks on each side
    • ISO 8860-1:1987 Part 1: Dimensional, physical and magnetic characteristics
    • ISO 8860-2:1987 Part 2: Track format
  • ISO 8871 Elastomeric parts for parenterals and for devices for pharmaceutical use
    • ISO 8871-1:2003 Part 1: Extractables in aqueous autoclavates
    • ISO 8871-2:2003 Part 2: Identification and characterization
    • ISO 8871-3:2003 Part 3: Determination of released-particle count
    • ISO 8871-4:2006 Part 4: Biological requirements and test methods
    • ISO 8871-5:2016 Part 5: Functional requirements and testing
  • ISO 8872:2003 Aluminium caps for transfusion, infusion and injection bottles – General requirements and test methods
  • ISO/IEC 8877:1992 Information technology – Telecommunications and information exchange between systems – Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T
  • ISO/IEC 8878:1992 Information technology – Telecommunications and information exchange between systems – Use of X.25 to provide the OSI Connection-mode Network Service
  • ISO 8879:1986 Information processing – Text and office systems – Standard Generalized Markup Language (SGML)
  • ISO/IEC 8881:1989 Information processing systems – Data communications – Use of the X.25 packet level protocol in local area networks
  • ISO/IEC 8882 Information technology – Telecommunications and information exchange between systems – X.25 DTE conformance testing
    • ISO/IEC 8882-1:1996 Part 1: General principles
    • ISO/IEC 8882-2:2000 Part 2: Data link layer conformance test suite
    • ISO/IEC 8882-3:2000 Part 3: Packet layer conformance test suite
  • ISO/IEC 8886:1996 Information technology – Open Systems Interconnection – Data link service definition
  • ISO 8887 Technical product documentation – Design for manufacturing, assembling, disassembling and end-of-life processing
    • ISO 8887-1:2017 Part 1: General concepts and requirements
  • ISO 8909 Forage harvesters
    • ISO 8909-1:1994 Part 1: Vocabulary
  • ISO 8910:1993 Machinery and equipment for working the soil – Mouldboard plough working elements – Vocabulary
  • ISO 8927:1991 Earth-moving machinery – Machine availability – Vocabulary
  • ISO 8930:1987 General principles on reliability for structures – List of equivalent terms
  • ISO 8936:2017 Awnings for leisure accommodation vehicles - Requirements and test methods
  • ISO 8954 Ferroalloys - Vocabulary
    • ISO 8954-1:1990 Part 1: Materials
    • ISO 8954-2:1990 Part 2: Sampling and sample preparation
    • ISO 8954-3:1990 Part 3: Sieve analysis
  • ISO 8957:1996 Information and documentation - Hebrew alphabet coded character sets for bibliographic information interchange
  • ISO 8965:2013 Logging industry – Technology – Terms and definitions
  • ISO 8979:2004 Pliers and nippers for electronics - Nomenclature
  • ISO 8980 Ophthalmic optics – Uncut finished spectacle lenses
    • ISO 8980-1:2017 Part 1: Specifications for single-vision and multifocal lenses
    • ISO 8980-2:2017 Part 2: Specifications for power-variation lenses
    • ISO 8980-3:2013 Part 3: Transmittance specifications and test methods
    • ISO 8980-4:2006 Part 4: Specifications and test methods for anti-reflective coatings
    • ISO 8980-5:2005 Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant
  • ISO 8999:2001 Reciprocating internal combustion engines - Graphical symbols

ISO 9000 – ISO 9999

  • ISO 9000:2015 Quality management systems – Fundamentals and vocabulary
  • ISO 9001:2015 Quality management systems – Requirements
  • ISO/TS 9002:2016 Quality management systems – Guidelines for the application of ISO 9001:2015
  • ISO 9004:2009 Managing for the sustained success of an organization – A quality management approach
  • ISO/TR 9007:1987 Information processing systems - Concepts and terminology for the conceptual schema and the information base
  • ISO 9019:1995 Securities – Numbering of certificates
  • ISO 9022 Optics and optical instruments - Environmental test methods
    • ISO 9022-1:2016 Definitions, extent of testing
    • ISO 9022-2:2015 Cold, heat and humidity
    • ISO 9022-3:2015 Mechanical stress
    • ISO 9022-4:2014 Salt mist
    • ISO 9022-5:1994 Combined cold, low air pressure [Withdrawn: replaced by ISO 9022-23:2016]
    • ISO 9022-6:2015 Dust
    • ISO 9022-23:2016 Low pressure combined with cold, ambient temperature and dry or damp heat
  • ISO 9031:1987 Air cargo equipment - Handling systems for unit load devices (ULDs) - Symbols for pictorial representation
  • ISO 9036:1987 Information processing - Arabic 7-bit coded character set for information interchange
  • ISO/IEC 9040:1997 Information technology – Open Systems Interconnection – Virtual Terminal Basic Class Service
  • ISO/IEC 9041 Information technology – Open Systems Interconnection – Virtual Terminal Basic Class Protocol
    • ISO/IEC 9041-1:1997 Part 1: Specification
    • ISO/IEC 9041-2:1997 Part 2: Protocol Implementation Conformance Statement (PICS) proforma
  • ISO 9045:1990 Industrial screens and screening – Vocabulary
  • ISO 9050 Glass in building – Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
  • ISO/IEC 9066 Information technology – Open Systems Interconnection – Reliable Transfer[Note 3]
    • ISO/IEC 9066-1:1989 Part 1: Model and service definition
    • ISO/IEC 9066-2:1989 Part 2: Protocol specification
    • ISO/IEC 9066-3:1996 Protocol Implementation Conformance Statement (PICS) proforma
  • :1988 Information processing – SGML support facilities – SGML Document Interchange Format (SDIF)
  • ISO/IEC 9070:1991 Information technology - SGML support facilities - Registration procedures for public text owner identifiers
  • ISO/IEC 9072 Information technology – Open Systems Interconnection – Remote Operations[Note 3]
    • ISO/IEC 9072-1:1989 Part 1: Model, notation and service definition
    • ISO/IEC 9072-2:1989 Part 2: Protocol specification
    • ISO/IEC 9072-3:1996 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/IEC 9075 Information technology – Database languages – SQL
  • ISO 9086 Wood – Methods of physical and mechanical testing – Vocabulary
    • ISO 9086-1:1987 Part 1: General concepts and macrostructure
  • ISO 9092:2011 Textiles – Nonwovens – Definition
  • ISO 9095:1990 Steel tubes – Continuous character marking and colour coding for material identification
  • ISO 9123:2001 Measurement of liquid flow in open channels – Stage-fall-discharge relationships
  • ISO/IEC 9126 Software engineering – Product quality
  • ISO 9128:2006 Road vehicles - Graphical symbols to designate brake fluid types
  • ISO 9141 Road vehicles – Diagnostic systems[Note 3]
    • ISO 9141-2 CARB requirements for interchange of digital information
    • ISO 9141-3 Verification of the communication between vehicle and OBD II scan tool
  • ISO 9144:1991 Securities – Optical character recognition line – Position and structure
  • ISO 9160:1988 Information processing - Data encipherment - Physical layer interoperability requirements
  • ISO 9170 Terminal units for medical gas pipeline systems
    • ISO 9170-1:2017 Part 1: Terminal units for use with compressed medical gases and vacuum
    • ISO 9170-2:2008 Part 2: Terminal units for anaesthetic gas scavenging systems
  • ISO/IEC 9171 Information technology - 130 mm optical disk cartridge, write once, for information interchange
    • ISO/IEC 9171-1:1990 Part 1: Unrecorded optical disk cartridge
    • ISO/IEC 9171-2:1990 Part 2: Recording format
  • ISO 9175 Tubular tips for hand-held technical pens using India ink on tracing paper
    • ISO 9175-1:1988 Part 1: Definitions, dimensions, designation and marking
  • ISO 9177 Mechanical pencils for technical drawings[Note 3]
    • ISO 9177-1:2016 Part 1: Classification, dimensions, performance requirements and testing
    • ISO 9177-2:1989 Part 2: Black leads – Classification and dimensions
    • ISO 9177-3:1994 Part 3: Black leads – Bending strengths of HB leads
  • ISO 9180:1988 Black leads for wood-cased pencils – Classification and diameters
  • ISO 9186 Graphical symbols - Test methods
    • ISO 9186-1:2014 Part 1: Method for testing comprehensibility
    • ISO 9186-2:2008 Part 2: Method for testing perceptual quality
    • ISO 9186-3:2014 Part 3: Method for testing symbol referent association
  • ISO 9187 Injection equipment for medical use
    • ISO 9187-1:2010 Part 1: Ampoules for injectables
    • ISO 9187-2:2010 Part 2: One-point-cut (OPC) ampoules
  • ISO 9195:1992 Liquid flow measurement in open channels – Sampling and analysis of gravel-bed material
  • ISO 9196:1992 Liquid flow measurement in open channels – Flow measurements under ice conditions
  • ISO 9211 Optics and photonics - Optical coatings
    • ISO 9211-1:2010 Part 1: Definitions
  • ISO/TR 9212:2015 Hydrometry – Methods of measurement of bedload discharge
  • ISO 9222 Technical drawings – Seals for dynamic application
    • ISO 9222-1:1989 Part 1: General simplified representation
    • ISO 9222-2:1989 Part 2: Detailed simplified representation
  • ISO 9223 Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation
  • ISO 9224 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories
  • ISO 9225 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres
  • ISO 9226 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
  • ISO 9227:2017 Corrosion tests in artificial atmospheres – Salt spray tests
  • ISO 9229:2007 Thermal insulation - Vocabulary
  • ISO 9230:2007 Information and documentation - Determination of price indexes for print and electronic media purchased by libraries
  • ISO 9232:2003 Yogurt – Identification of characteristic microorganisms (Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus)
  • ISO 9235:2013 Aromatic natural raw materials – Vocabulary
  • ISO 9241 Ergonomics of human-system interaction
  • ISO 9244:2008 Earth-moving machinery - Machine safety labels - General principles
  • ISO 9245:1991 Earth-moving machinery – Machine productivity – Vocabulary, symbols and units
  • ISO 9247:1990 Earth-moving machinery – Electrical wires and cables – Principles of identification and marking
  • ISO/TS 9250 Earth-moving machinery – Multilingual listing of equivalent terms
    • ISO/TS 9250-1:2012 Part 1: General
    • ISO/TS 9250-2:2012 Part 2: Performance and dimensions
  • ISO 9251:1987 Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary
  • ISO 9264:1988 Woodworking machines – Narrow belt sanding machines with sliding table or frame – Nomenclature
  • ISO 9265:1988 Woodworking machines – Multi-spindle boring machines – Nomenclature
  • ISO 9266:1988 Woodworking machines – Universal tool and cutter sharpeners – Nomenclature
  • ISO 9267:1988 Woodworking machines – Bandsaw blade sharpening machines – Nomenclature
  • ISO 9268:1988 Implants for surgery – Metal bone screws with conical under-surface of head – Dimensions
  • ISO 9269:1988 Implants for surgery – Metal bone plates – Holes and slots corresponding to screws with conical under-surface
  • ISO/IEC 9281 Information technology - Picture coding methods
    • ISO/IEC 9281-1:1990 Part 1: Identification
    • ISO/IEC 9281-2:1990 Part 2: Procedure for registration
  • ISO/IEC 9282 Information processing - Coded representation of pictures
    • ISO/IEC 9282-1:1988 Part 1: Encoding principles for picture representation in a 7-bit or 8-bit environment
  • ISO 9288:1989 Thermal insulation – Heat transfer by radiation – Physical quantities and definitions
  • ISO/IEC 9293:1994 Information technology – Volume and file structure of disk cartridges for information interchange
  • ISO 9295:2015 Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment
  • ISO 9296:2017 Acoustics - Declared noise emission values of information technology and telecommunications equipment
  • ISO 9300:2005 Measurement of gas flow by means of critical flow Venturi nozzles
  • ISO 9308 Water quality – Enumeration of Escherichia coli and coliform bacteria[Note 3]
    • ISO 9308-1:2014 Part 1: Membrane filtration method for waters with low bacterial background flora
    • ISO 9308-2:2012 Part 2: Most probable number method
    • ISO 9308-3:1998 Part 3: Miniaturized method (Most Probable Number) for the detection and enumeration of E. coli in surface and waste water
  • ISO 9314 Information processing systems Fibre Distributed Data Interface (FDDI)
    • ISO 9314-1:1989 Part 1: Token Ring Physical Layer Protocol (PHY)
    • ISO 9314-2:1989 Part 2: Token Ring Media Access Control (MAC)
    • ISO/IEC 9314-3:1990 Part 3: Physical Layer Medium Dependent (PMD)
    • ISO/IEC 9314-4:1999 Part 4: Single Mode Fibre Physical Layer Medium Dependent (SMF-PMD)
    • ISO/IEC 9314-5:1995 Part 5: Hybrid Ring Control (HRC)
    • ISO/IEC 9314-6:1998 Part 6: Station Management (SMT)
    • ISO/IEC 9314-7:1998 Part 7: Physical layer Protocol (PHY-2)
    • ISO/IEC 9314-8:1998 Part 8: Media Access Control-2 (MAC-2)
    • ISO/IEC 9314-9:2000 Part 9: Low-cost fibre physical layer medium dependent (LCF-PMD)
    • ISO/IEC 9314-13:1998 Part 13: Conformance Test Protocol Implementation Conformance Statement (CT-PICS) Proforma
    • ISO/IEC 9314-20:2001 Part 20: Abstract test suite for FDDI physical medium dependent conformance testing (FDDI PMD ATS)
    • ISO/IEC 9314-21:2000 Part 21: Abstract test suite for FDDI physical layer protocol conformance testing (FDDI PHY ATS)
    • ISO/IEC 9314-25:1998 Part 25: Abstract test suite for FDDI - Station Management Conformance Testing (SMT-ATS)
    • ISO/IEC 9314-26:2001 Part 26: Media Access Control Conformance Testing (MAC-ATS)
  • ISO 9315:1989 Information processing systems - Interface between flexible disk cartridge drives and their host controllers
  • ISO/IEC 9316:1995 Information technology - Small Computer System Interface-2
    • ISO/IEC 9316-2:2000 Information technology - Small computer system interface-2 (SCSI-2) - Part 2: Common Access Method (CAM) Transport and SCSI interface module
  • ISO/IEC 9318 Information technology - Intelligent Peripheral Interface
    • ISO/IEC 9318-2:1990 Part 2: Device specific command set for magnetic disk drives
    • ISO/IEC 9318-3:1990 Part 3: Device generic command set for magnetic and optical disk drives
    • ISO/IEC 9318-4:2002 Part 4: Device generic command set for magnetic tape drives (IPI-3 tape)
  • ISO 9334:2012 Optics and photonics - Optical transfer function - Definitions and mathematical relationships
  • ISO 9335:2012 Optics and photonics - Optical transfer function - Principles and procedures of measurement
  • ISO 9342 Optics and optical instruments – Test lenses for calibration of focimeters
    • ISO 9342-1:2005 Part 1: Test lenses for focimeters used for measuring spectacle lenses
    • ISO 9342-2:2005 Part 2: Test lenses for focimeters used for measuring contact lenses
  • ISO 9346:2007 Hygrothermal performance of buildings and building materials – Physical quantities for mass transfer – Vocabulary
  • ISO 9360 Anaesthetic and respiratory equipment – Heat and moisture exchangers (HMEs) for humidifying respired gases in humans
    • ISO 9360-1:2000 Part 1: HMEs for use with minimum tidal volumes of 250 ml
    • ISO 9360-2:2001 Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
  • ISO 9362:2014 Banking – Banking telecommunication messages – Business identifier code (BIC)
  • ISO 9368 Measurement of liquid flow in closed conduits by the weighing method – Procedures for checking installations
    • ISO 9368-1:1990 Part 1: Static weighing systems
  • ISO 9394:2012 Ophthalmic optics – Contact lenses and contact lens care products – Determination of biocompatibility by ocular study with rabbit eyes
  • ISO 9407 Shoe sizes – Mondopoint system of sizing and marking
  • ISO 9431:1990 Construction drawings – Spaces for drawing and for text, and title blocks on drawing sheets
  • ISO/TR 9464:2008 Guidelines for the use of ISO 5167:2003
  • ISO 9488:1999 Solar energy - Vocabulary
  • ISO 9493:2010 Geometrical product specifications (GPS) – Dimensional measuring equipment: Dial test indicators (lever type) – Design and metrological characteristics
  • ISO/IEC 9496:2003 CHILL - The ITU-T programming language
  • ISO 9506 Industrial automation systems - Manufacturing Message Specification
  • ISO/IEC 9529 Information processing systems - Data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each side
    • ISO/IEC 9529-1:1989 Part 1: Dimensional, physical and magnetic characteristics
    • ISO/IEC 9529-2:1989 Part 2: Track format
  • Information technology – Font information interchange
    • ISO/IEC 9541-1:2012 Part 1: Architecture
    • ISO/IEC 9541-2:2012 Part 2: Interchange Format
    • ISO/IEC 9541-3:2012 Part 3: Glyph shape representation
    • ISO/IEC 9541-4:2009 Part 4: Harmonization to Open Font Format
  • ISO 9542:1988 Information processing systems – Telecommunications and information exchange between systems – End system to Intermediate system routeing exchange protocol for use in conjunction with the Protocol for providing the connectionless-mode network service (ISO 8473)
  • ISO 9543:1989 Information processing systems – Information exchange between systems – Synchronous transmission signal quality at DTE/DCE interfaces
  • ISO/IEC 9545:1994 Information technology – Open Systems Interconnection – Application Layer structure
  • ISO/TR 9547:1988 Programming language processors - Test methods - Guidelines for their development and acceptability
  • ISO/IEC 9548 Information technology – Open Systems Interconnection – Connectionless Session protocol
    • ISO/IEC 9548-1:1996 Protocol specification
    • ISO/IEC 9548-2:1995 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/IEC 9549:1990 Information technology – Galvanic isolation of balanced interchange circuit
  • ISO 9555 Measurement of liquid flow in open channels – Tracer dilution methods for the measurement of steady flow
    • ISO 9555-1:1994 Part 1: General
    • ISO 9555-3:1992 Part 3: Chemical tracers
    • ISO 9555-4:1992 Part 4: Fluorescent tracers
  • ISO 9564 Financial services – Personal Identification Number (PIN) management and security
  • ISO 9568:1993 Cinematography – Background acoustic noise levels in theatres, review rooms and dubbing rooms
  • ISO/IEC TR 9573:1988 Information processing - SGML support facilities - Techniques for using SGML
    • ISO/IEC TR 9573-11:2004 Part 11: Structure descriptions and style specifications for standards document interchange
    • ISO/IEC TR 9573-13:1991 Part 13: Public entity sets for mathematics and science
  • ISO/IEC 9574:1992 Information technology – Provision of the OSI connection-mode network service by packet mode terminal equipment to an integrated services digital network (ISDN)
  • ISO/IEC TR 9575:1995 Information technology – Telecommunications and information exchange between systems – OSI Routeing Framework
  • ISO/IEC 9576 Information technology – Open Systems Interconnection – Connectionless Presentation protocol
    • ISO/IEC 9576-1:1995 Protocol specification
    • ISO/IEC 9576-2:1995 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/IEC TR 9577:1999 Information technology – Protocol identification in the network layer
  • ISO/IEC TR 9578:1990 Information technology – Communication interface connectors used in local area networks
  • :2000 Information technology – Remote database access for SQL with security enhancement
  • ISO 9583:1993 Implants for surgery – Non-destructive testing – Liquid penetrant inspection of metallic surgical implants
  • ISO 9584:1993 Implants for surgery – Non-destructive testing – Radiographic examination of cast metallic surgical implants
  • ISO 9585:1990 Implants for surgery – Determination of bending strength and stiffness of bone plates
  • ISO/IEC 9592 Information technology – Computer graphics and image processing – Programmer's Hierarchical Interactive Graphics System (PHIGS)
  • ISO/IEC 9593 Information technology – Computer graphics – Programmer's Hierarchical Interactive Graphics System (PHIGS) language bindings[Note 3]
  • Information technology – Open Systems Interconnection – The Directory
    • ISO/IEC 9594-1:2017 Part 1: Overview of concepts, models and services
    • ISO/IEC 9594-2:2017 Part 2: Models
    • ISO/IEC 9594-3:2017 Part 3: Abstract service definition
    • ISO/IEC 9594-4:2017 Part 4: Procedures for distributed operation
    • ISO/IEC 9594-5:2017 Part 5: Protocol specifications
    • ISO/IEC 9594-6:2017 Part 6: Selected attribute types
    • ISO/IEC 9594-7:2017 Part 7: Selected object classes
    • ISO/IEC 9594-8:2017 Part 8: Public-key and attribute certificate frameworks
    • ISO/IEC 9594-9:2017 Part 9: Replication
  • ISO/IEC 9595:1998 Information technology – Open Systems Interconnection – Common management information service
  • ISO/IEC 9596 Information technology – Open Systems Interconnection – Common management information protocol
    • ISO/IEC 9596-1:1998 Part 1: Specification
    • ISO/IEC 9596-2:1993 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO 9611:1996 Acoustics – Characterization of sources of structure-borne sound with respect to sound radiation from connected structures – Measurement of velocity at the contact points of machinery when resiliently mounted
  • ISO 9613 Acoustics – Attenuation of sound during propagation outdoors
    • ISO 9613-1:1993 Part 1: Calculation of the absorption of sound by the atmosphere
    • ISO 9613-2:1996 Part 2: General method of calculation
  • ISO 9614 Acoustics – Determination of sound power levels of noise sources using sound intensity
    • ISO 9614-1:1993 Part 1: Measurement at discrete points
    • ISO 9614-2:1996 Part 2: Measurement by scanning
    • ISO 9614-3:2002 Part 3: Precision method for measurement by scanning
  • ISO 9626:2016 Stainless steel needle tubing for the manufacture of medical devices – Requirements and test methods
  • Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Functional specification
    • ISO/IEC 9636-1:1991 Part 1: Overview, profiles, and conformance
    • ISO/IEC 9636-2:1991 Part 2: Control
    • ISO/IEC 9636-3:1991 Part 3: Output
    • ISO/IEC 9636-4:1991 Part 4: Segments
    • ISO/IEC 9636-5:1991 Part 5: Input and echoing
    • ISO/IEC 9636-6:1991 Part 6: Raster
  • ISO/IEC 9637 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) – Data stream binding
    • ISO/IEC 9637-1:1994 Part 1: Character encoding
    • ISO/IEC 9637-2:1992 Part 2: Binary encoding
  • ISO/IEC 9638 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Language bindings
    • ISO/IEC 9638-3:1994 Part 3: Ada
  • ISO 9645:1990 Acoustics – Measurement of noise emitted by two-wheeled mopeds in motion – Engineering method
  • ISO/IEC 9646 Information technology—Open Systems InterconnectionConformance testing methodology and framework
    • ISO/IEC 9646-1:1994 Part 1: General concepts
    • ISO/IEC 9646-2:1994 Part 2: Abstract Test Suite specification
    • ISO/IEC 9646-3:1998 Part 3: The Tree and Tabular Combined Notation (TTCN)
    • ISO/IEC 9646-4:1994 Part 4: Test realization
    • ISO/IEC 9646-5:1994 Part 5: Requirements on test laboratories and clients for the conformance assessment process
    • ISO/IEC 9646-6:1994 Part 6: Protocol profile test specification
    • ISO/IEC 9646-7:1995 Part 7: Implementation Conformance Statements
  • ISO 9660:1988 Information processing – Volume and file structure of CD-ROM for information interchange
  • ISO/IEC 9661:1994 Information technology – Data interchange on 12,7 mm wide magnetic tape cartridges – 18 tracks, 1 491 data bytes per millimetre
  • ISO 9662:1994 Aircraft equipment - Environmental and operating conditions for airborne equipment - Humidity, temperature and pressure tests
  • ISO 9687:2015 Dentistry - Graphical symbols for dental equipment
  • ISO 9688:1990 Mechanical vibration and shock – Analytical methods of assessing shock resistance of mechanical systems – Information exchange between suppliers and users of analyses
  • ISO 9696:2007 Water quality - Measurement of gross alpha activity in non-saline water - Thick source method
  • ISO 9706:1994 Information and documentation – Paper for documents – Requirements for permanence
  • ISO 9707:2008 Information and documentation - Statistics on the production and distribution of books, newspapers, periodicals and electronic publications
  • ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel
  • ISO 9713:2002 Neurosurgical implants – Self-closing intracranial aneurysm clips
  • ISO 9714 Orthopaedic drilling instruments
    • ISO 9714-1:2012 Part 1: Drill bits, taps and countersink cutters
  • ISO 9735:1988 Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4, Syntax release number: 2)[Note 3]
    • ISO 9735-1:2002 Part 1: Syntax rules common to all parts
    • ISO 9735-2:2002 Part 2: Syntax rules specific to batch EDI
    • ISO 9735-3:2002 Part 3: Syntax rules specific to interactive EDI
    • ISO 9735-4:2002 Part 4: Syntax and service report message for batch EDI (message type – CONTRL)
    • ISO 9735-5:2002 Part 5: Security rules for batch EDI (authenticity, integrity and non-repudiation of origin)
    • ISO 9735-6:2002 Part 6: Secure authentication and acknowledgement message (message type – AUTACK)
    • ISO 9735-7:2002 Part 7: Security rules for batch EDI (confidentiality)
    • ISO 9735-8:2002 Part 8: Associated data in EDI
    • ISO 9735-9:2002 Part 9: Security key and certificate management message (message type – KEYMAN)
    • ISO 9735-10:2014 Part 10: Syntax service directories
  • Information technology – Security techniques – Digital signature schemes giving message recovery
    • ISO/IEC 9796-2:2010 Part 2: Integer factorization based mechanisms
    • ISO/IEC 9796-3:2006 Part 3: Discrete logarithm based mechanisms
  • ISO/IEC 9797 Information technology – Security techniques – Message Authentication Codes (MACs)
    • ISO/IEC 9797-1:2011 Part 1: Mechanisms using a block cipher
    • :2011 Part 2: Mechanisms using a dedicated hash-function
    • ISO/IEC 9797-3:2011 Part 3: Mechanisms using a universal hash-function
  • Information technology – Security techniques – Entity authentication
    • ISO/IEC 9798-1:2010 Part 1: General
    • ISO/IEC 9798-2:2008 Part 2: Mechanisms using symmetric encipherment algorithms
    • ISO/IEC 9798-3:1998 Part 3: Mechanisms using digital signature
    • ISO/IEC 9798-4:1999 Part 4: Mechanisms using a cryptographic check function
    • ISO/IEC 9798-5:2009 Part 5: Mechanisms using zero-knowledge techniques
    • ISO/IEC 9798-6:2010 Part 6: Mechanisms using manual data transfer
  • ISO 9801:2009 Ophthalmic instruments – Trial case lenses
  • ISO 9802:1996 Raw optical glass – Vocabulary
  • ISO/IEC 9804:1998 Information technology – Open Systems Interconnection – Service definition for the Commitment, Concurrency and Recovery service element
  • ISO/IEC 9805 Information technology – Open Systems Interconnection – Protocol for the Commitment, Concurrency and Recovery service element
    • ISO/IEC 9805-1:1998 Protocol specification
    • ISO/IEC 9805-2:1996 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/TR 9824:2007 Hydrometry – Measurement of free surface flow in closed conduits
  • ISO 9825:2005 Hydrometry – Field measurement of discharge in large rivers and rivers in flood
  • ISO 9826:1992 Measurement of liquid flow in open channels – Parshall and SANIIRI flumes
  • ISO 9827:1994 Measurement of liquid flow in open channels by weirs and flumes – Streamlined triangular profile weirs
  • Information technology – Open Systems Interconnection – Procedures for the operation of OSI Registration Authorities
    • ISO/IEC 9834-1:2012 General procedures and top arcs of the international object identifier tree
    • ISO/IEC 9834-2:1993 Part 2: Registration procedures for OSI document types
    • ISO/IEC 9834-3:2008 Registration of Object Identifier arcs beneath the top-level arc jointly administered by ISO and ITU-T
    • ISO/IEC 9834-4:1991 Part 4: Register of VTE Profiles
    • ISO/IEC 9834-5:1991 Part 5: Register of VT Control Object Definitions
    • ISO/IEC 9834-6:2005 Registration of application processes and application entities
    • ISO/IEC 9834-7:2008 Joint ISO and ITU-T Registration of International Organizations
    • ISO/IEC 9834-8:2014 Part 8: Generation of universally unique identifiers (UUIDs) and their use in object identifiers
    • ISO/IEC 9834-9:2008 Registration of object identifier arcs for applications and services using tag-based identification
  • ISO 9849:2017 Optics and optical instruments - Geodetic and surveying instruments - Vocabulary
  • ISO 9851:1990 Continuous mechanical handling equipment – Overhead electrical monorail conveyors – Definitions and safety rules
  • Thermal insulation – Building elements – In-situ measurements of thermal resistance and thermal transmittance
  • ISO 9873:2017 Dentistry - Intra-oral mirrors
  • ISO 9878:1990 Micrographics - Graphical symbols for use in microfilming
  • ISO 9897:1997 Freight containers - Container equipment data exchange (CEDEX) - General communication codes
  • ISO/IEC 9899:2011 Programming languages – C
  • ISO 9902 Textile machinery – Noise test code
    • ISO 9902-1:2001 Part 1: Common requirements
    • ISO 9902-2:2001 Part 2: Spinning preparatory and spinning machinery
    • ISO 9902-3:2001 Part 3: Nonwoven machinery
    • ISO 9902-4:2001 Part 4: Yarn processing, cordage and rope manufacturing machinery
    • ISO 9902-5:2001 Part 5: Weaving and knitting preparatory machinery
    • ISO 9902-6:2001 Part 6: Fabric manufacturing machinery
    • ISO 9902-7:2001 Part 7: Dyeing and finishing machinery
  • ISO 9926 Cranes – Training of operators[Note 3]
    • ISO 9926-1:1990 Part 1: General
    • ISO 9926-3:2016 Part 3: Tower cranes
  • ISO/IEC/IEEE 9945:2009 Information technology – Portable Operating System Interface (POSIX®) Base Specifications, Issue 7
  • ISO 9947:2005 Textile machinery and accessories – Two-for-one twisters – Vocabulary
  • ISO 9949 Urine absorbing aids - Vocabulary
    • ISO 9949-1:1993 Part 1: Conditions of urinary incontinence
    • ISO 9949-2:1993 Part 2: Products
    • ISO 9949-3:1993 Part 3: Identification of product types
  • ISO 9951:1993 Measurement of gas flow in closed conduits – Turbine meters
  • ISO 9957 Fluid draughting media
    • ISO 9957-1:1992 Part 1: Water-based India ink – Requirements and test conditions
    • ISO 9957-2:1995 Part 2: Water-based non-India ink – Requirements and test conditions
    • ISO 9957-3:1997 Part 3: Water-based coloured draughting inks – Requirements and test conditions
  • ISO 9958 Draughting media for technical drawings – Draughting film with polyester base
    • ISO 9958-1:1992 Part 1: Requirements and marking
    • ISO 9958-2:1992 Part 2: Determination of properties
  • ISO 9959 Numerically controlled draughting machines – Drawing test for the evaluation of performance
    • ISO 9959-1:1992 Part 1: Vector plotters
  • ISO 9960 Draughting instruments with or without graduation
    • ISO 9960-1:1992 Part 1: Draughting scale rules
  • ISO 9961:1992 Draughting media for technical drawings – Natural tracing paper
  • ISO 9962 Manually operated draughting machines
    • ISO 9962-1:1992 Part 1: Definitions, classification and designation
    • ISO 9962-2:1992 Part 2: Characteristics, performance, inspection and marking
  • ISO/IEC 9973:2013 Information technology - Computer graphics, image processing and environmental data representation - Procedures for registration of items
  • ISO 9984:1996 Information and documentation – Transliteration of Georgian characters into Latin characters
  • ISO 9985:1996 Information and documentation – Transliteration of Armenian characters into Latin characters
  • Financial transaction cards – Messages between the integrated circuit card and the card accepting device
  • ISO/IEC 9995 Information technology – Keyboard layouts for text and office systems
  • ISO 9997:1999 Dental cartridge syringes
  • Assistive products for persons with disability – Classification and terminology

ISO 10000 – ISO 10999

  • ISO/IEC TR 10000 Information technology – Framework and taxonomy of International Standardized Profiles
    • ISO/IEC TR 10000-1:1998 Part 1: General principles and documentation framework
    • ISO/IEC TR 10000-2:1998 Part 2: Principles and Taxonomy for OSI Profiles
    • ISO/IEC TR 10000-3:1998 Part 3: Principles and Taxonomy for Open System Environment Profiles
  • :2007 Quality management – Customer satisfaction – Guidelines for codes of conduct for organizations
  • :2014 Quality management – Customer satisfaction – Guidelines for complaints handling in organizations
  • :2007 Quality management – Customer satisfaction – Guidelines for dispute resolution external to organizations
  • :2008 Quality management – Customer satisfaction – Guidelines for monitoring and measuring
  • ISO 10005:2005 Quality management systems – Guidelines for quality plans
  • ISO 10006:2003 Quality management systems – Guidelines for quality management in projects
  • ISO 10007:2017 Quality management systems – Guidelines for configuration management
  • ISO 10008:2013 Quality management – Customer satisfaction – Guidelines for business-to-consumer electronic commerce transactions
  • ISO 10012:2003 Measurement management systems – Requirements for measurement processes and measuring equipment
  • :2001 Guidelines for quality management system documentation
  • ISO 10014:2006 Quality management – Guidelines for realizing financial and economic benefits
  • :1999 Quality management – Guidelines for training
  • :2003 Guidance on statistical techniques for ISO 9001:2000
  • :2012 Quality management – Guidelines on people involvement and competence
  • :2005 Guidelines for the selection of quality management system consultants and use of their services
  • ISO/IEC 10021 Information technology – Message Handling Systems (MHS)
  • ISO/IEC 10022:1996 Information technology – Open Systems Interconnection – Physical Service Definition
  • Information technology – Open Systems Interconnection – Distributed Transaction Processing
    • ISO/IEC 10026-1:1998 Part 1: OSI TP Model
    • ISO/IEC 10026-2:1998 Part 2: OSI TP Service
    • ISO/IEC 10026-3:1998 Part 3: Protocol specification
    • ISO/IEC 10026-4:1995 Protocol Implementation Conformance Statement (PICS) proforma
    • ISO/IEC 10026-5:1998 Part 5: Application context proforma and guidelines when using OSI TP
    • ISO/IEC 10026-6:1995 Part 6: Unstructured Data Transfer
  • ISO/IEC 10027:1990 Information technology – Information Resource Dictionary System (IRDS) framework
  • ISO/IEC 10028:1993 Information technology – Telecommunications and information exchange between systems – Definition of the relaying functions of a Network layer intermediate system
  • ISO/IEC 10030:1995 Information technology – Telecommunications and information exchange between systems – End System Routeing Information Exchange Protocol for use in conjunction with ISO/IEC 8878
  • ISO/IEC TR 10032:2003 Information technology – Reference Model of Data Management
  • ISO/IEC TR 10034:1990 Guidelines for the preparation of conformity clauses in programming language standards
  • ISO/IEC 10035 Information technology – Open Systems Interconnection – Connectionless protocol for the Association Control Service Element
    • ISO/IEC 10035-2:1995 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/IEC 10036:1996 Information technology - Font information interchange - Procedures for registration of font-related identifiers
  • ISO/IEC 10040:1998 Information technology – Open Systems Interconnection – Systems management overview
  • ISO 10052:2004 Acoustics – Field measurements of airborne and impact sound insulation and of service equipment sound – Survey method
  • ISO 10055:1996 Mechanical vibration - Vibration testing requirements for shipboard equipment and machinery components
  • ISO 10075 Ergonomic principles related to mental workload
    • ISO 10075-1:2017 Part 1: General issues and concepts, terms and definitions
  • Thermal performance of windows, doors and shutters – Calculation of thermal transmittance
  • ISO 10079 Medical suction equipment
    • ISO 10079-1:2015 Part 1: Electrically powered suction equipment
    • ISO 10079-2:2014 Part 2: Manually powered suction equipment
    • ISO 10079-3:2014 Part 3: Suction equipment powered from a vacuum or positive pressure gas source
  • :1991 Information technology – 130 mm rewritable optical disk cartridge for information interchange
  • ISO/IEC 10090:1992 Information technology – 90 mm optical disk cartridges, rewritable and read only, for data interchange
  • ISO/IEC TR 10091:1995 Information technology – Technical aspects of 130 mm optical disk cartridge write-once recording format
  • ISO 10110 Optics and photonics – Preparation of drawings for optical elements and systems[Note 3]
    • ISO 10110-1:2006 Part 1: General
    • ISO 10110-2:1996 Part 2: Material imperfections – Stress birefringence
    • ISO 10110-3:1996 Part 3: Material imperfections – Bubbles and inclusions
    • ISO 10110-4:1997 Part 4: Material imperfections – Inhomogeneity and striae
    • ISO 10110-5:2015 Part 5: Surface form tolerances
    • ISO 10110-6:2015 Part 6: Centring tolerances
    • ISO 10110-7:2017 Part 7: Surface imperfections
    • ISO 10110-8:2010 Part 8: Surface texture; roughness and waviness
    • ISO 10110-9:2016 Part 9: Surface treatment and coating
    • ISO 10110-10:2004 Part 10: Table representing data of optical elements and cemented assemblies
    • ISO 10110-11:2016 Part 11: Non-toleranced data
    • ISO 10110-12:2007 Part 12: Aspheric surfaces
    • ISO 10110-14:2007 Part 14: Wavefront deformation tolerance
    • ISO 10110-17:2004 Part 17: Laser irradiation damage threshold
    • ISO 10110-19:2015 Part 19: General description of surfaces and components
  • ISO 10112:1991 Damping materials – Graphical presentation of the complex modulus
  • ISO/IEC 10116 Information technology – Security techniques – Modes of operation for an n-bit block cipher
  • Information technology – Security techniques – Hash-functions
    • ISO/IEC 10118-1:2016 Part 1: General
    • ISO/IEC 10118-2:2010 Part 2: Hash-functions using an n-bit block cipher
    • ISO/IEC 10118-3:2004 Part 3: Dedicated hash-functions
    • ISO/IEC 10118-4:1998 Part 4: Hash-functions using modular arithmetic
  • ISO 10132:1993 Textiles – Textured filament yarn – Definitions
  • ISO 10135:2007 Geometrical product specifications (GPS) – Drawing indications for moulded parts in technical product documentation (TPD)
  • ISO/IEC 10149:1995 Information technology - Data interchange on read-only 120 mm optical data disks (CD-ROM)
  • ISO 10159:2011 Health informatics – Messages and communication – Web access reference manifest
  • ISO 10160:2015 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Service Definition
  • ISO 10161 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Protocol Specification
    • ISO 10161-1:2014 Part 1: Protocol specification
    • ISO 10161-2:2014 Part 2: Protocol implementation conformance statement (PICS) proforma
  • Information technology – Open Systems Interconnection – Systems Management
    • ISO/IEC 10164-1:1993 Object Management Function
    • ISO/IEC 10164-2:1993 State Management Function
    • ISO/IEC 10164-3:1993 Attributes for representing relationships
    • ISO/IEC 10164-4:1992 Alarm reporting function
    • ISO/IEC 10164-5:1993 Event Report Management Function
    • ISO/IEC 10164-6:1993 Log control function
    • ISO/IEC 10164-7:1992 Security alarm reporting function
    • ISO/IEC 10164-8:1993 Security audit trail function
    • ISO/IEC 10164-9:1995 Objects and attributes for access control
    • ISO/IEC 10164-10:1995 Usage metering function for accounting purposes
    • ISO/IEC 10164-11:1994 Metric objects and attributes
    • ISO/IEC 10164-12:1994 Test Management Function
    • ISO/IEC 10164-13:1995 Summarization Function
    • ISO/IEC 10164-14:1996 Confidence and diagnostic test categories
    • ISO/IEC 10164-15:2002 Scheduling function
    • ISO/IEC 10164-16:1997 Management knowledge management function
    • ISO/IEC 10164-17:1996 Change over function
    • ISO/IEC 10164-18:1997 Software management function
    • ISO/IEC 10164-19:1998 Management domain and management policy management function
    • ISO/IEC 10164-20:1999 Time management function
    • ISO/IEC 10164-21:1998 Command sequencer for Systems Managenment
    • ISO/IEC 10164-22:2000 Response time monitoring
  • ISO/IEC 10165 Information technology – Open Systems Interconnection – Structure of management information[Note 3]
    • ISO/IEC 10165-1:1993 Management Information Model
    • ISO/IEC 10165-2:1992 Definition of management information
    • ISO/IEC 10165-4:1992 Part 4: Guidelines for the definition of managed objects
    • ISO/IEC 10165-5:1994 Generic management information
    • ISO/IEC 10165-6:1997 Requirements and guidelines for implementation conformance statement proformas associated with OSI management
    • ISO/IEC 10165-7:1996 General relationship model
    • ISO/IEC 10165-8:2000 Managed objects for supporting upper layers
    • ISO/IEC 10165-9:2000 Systems management application layer managed objects
  • ISO/IEC 10166 Information technology – Text and office systems – Document Filing and Retrieval (DFR)
    • ISO/IEC 10166-1:1991 Part 1: Abstract service definition and procedures
    • ISO/IEC 10166-2:1991 Part 2: Protocol specification
  • ISO/IEC TR 10171:2000 Information technology – Telecommunications and information exchange between systems – List of standard data link layer protocols that utilize high-level data link control (HDLC) classes of procedures, list of standard XID format identifiers, list of standard mode-setting information field format identifiers, and list of standard user-defined parameter set identification values
  • ISO/IEC 10173:1998 Information technology – Telecommunications and information exchange between systems – Interface connector and contact assignments for ISDN primary rate access connector located at reference points S and T
  • ISO/IEC 10175 Information technology – Text and office systems – Document Printing Application (DPA)
    • ISO/IEC 10175-1:1996 Part 1: Abstract service definition and procedures
    • ISO/IEC 10175-2:1996 Part 2: Protocol specification
    • ISO/IEC 10175-3:2000 Part 3: Management abstract service definitions and procedures
  • ISO/IEC TR 10176:2003 Information technology - Guidelines for the preparation of programming language standards
  • ISO/IEC 10177:1993 Information technology – Telecommunications and information exchange between systems – Provision of the connection-mode Network internal layer service by intermediate systems using ISO/IEC 8208, the X.25 Packet Layer Protocol
  • ISO/IEC 10179:1996 Information technology – Processing languages – Document Style Semantics and Specification Language (DSSSL)
  • ISO/IEC 10180:1995 Information technology - Processing languages - Standard Page Description Language (SPDL)
  • ISO/IEC 10181 Information technology - Open Systems Interconnection - Security frameworks for open systems
    • ISO/IEC 10181-1:1996 Overview
    • ISO/IEC 10181-2:1996 Authentication framework
    • ISO/IEC 10181-3:1996 Access control framework
    • ISO/IEC 10181-4:1997 Non-repudiation framework
    • ISO/IEC 10181-5:1996 Confidentiality framework
    • ISO/IEC 10181-6:1996 Integrity framework
    • ISO/IEC 10181-7:1996 Security audit and alarms framework
  • ISO/IEC TR 10182:2016 Information technology - Programming languages, their environments and system software interfaces - Guidelines for language bindings
  • ISO/IEC TR 10183 Information technology – Text and office systems – Office Document Architecture (ODA) and interchange format – Technical Report on ISO 8613 implementation testing
    • ISO/IEC TR 10183-1:1993 Part 1: Testing methodology
    • ISO/IEC TR 10183-2:1993 Part 2: Framework for abstract test cases
  • ISO/IEC 10192 Information technology - Home Electronic System (HES) interfaces
    • ISO/IEC 10192-1:2002 Part 1: Universal Interface (UI) Class 1
    • ISO/IEC TR 10192-2:2000 Part 2: Simple Interfaces Type 1
  • ISO/IEC 10206:1991 Information technology – Programming languages – Extended Pascal
  • ISO 10209:2012 Technical product documentation - Vocabulary - Terms relating to technical drawings, product definition and related documentation
  • Thermal bridges in building construction – Heat flows and surface temperatures – Detailed calculations
  • ISO 10218 Robots and robotic devices – Safety requirements for industrial robots
  • ISO 10241 Terminological entries in standards
    • ISO 10241-1:2011 Part 1: General requirements and examples of presentation
    • ISO 10241-2:2012 Part 2: Adoption of standardized terminological entries
  • ISO 10243:2010 Tools for pressing – Compression springs with rectangular section – Housing dimensions and colour coding
  • ISO 10244:2010 Document management - Business process baselining and analysis
  • ISO 10254:2016 Air cargo and ground equipment – Vocabulary
  • ISO/TR 10255:2009 Document management applications - Optical disk storage technology, management and standards
  • ISO 10263 Earth-moving machinery – Operator enclosure environment
    • ISO 10263-1:2009 Part 1: Terms and definitions
  • ISO 10272 Microbiology of the food chain – Horizontal method for detection and enumeration of Campylobacter spp.
    • ISO 10272-1:2017 Part 1: Detection method
    • ISO 10272-2:2017 Part 2: Colony-count technique
  • ISO 10273:2017 Microbiology of the food chain - Horizontal method for the detection of pathogenic Yersinia enterocolitica
  • :1991 Information technology – Programming languages – Full BASIC
  • ISO 10284:1997 Cinematography - Graphical symbols - Description
  • ISO 10286:2015 Gas cylinders - Terminology
  • ISO 10302 Acoustics – Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices
    • ISO 10302-1:2011 Part 1: Airborne noise measurement
    • ISO 10302-2:2011 Part 2: Structure-borne vibration measurements
  • ISO 10303 Industrial automation systems and integration – Product data representation and exchange
  • ISO 10318 Geosynthetics
    • ISO 10318-1:2015 Part 1: Terms and definitions
    • ISO 10318-2:2015 Part 2: Symbols and pictograms
  • ISO 10322 Ophthalmic optics – Semi-finished spectacle lens blanks
    • ISO 10322-1:2016 Part 1: Specifications for single-vision and multifocal lens blanks
    • ISO 10322-2:2016 Part 2: Specifications for progressive-power and degressive-power lens blanks
  • ISO 10324:1997 Information and documentation - Holdings statements - Summary level
  • ISO 10328:2016 Prosthetics – Structural testing of lower-limb prostheses – Requirements and test methods
  • ISO 10334:1994 Implants for surgery – Malleable wires for use as sutures and other surgical applications
  • ISO 10341:2012 Ophthalmic instruments – Refractor heads
  • ISO 10342:2010 Ophthalmic instruments – Eye refractometers
  • ISO 10343:2014 Ophthalmic instruments – Ophthalmometers
  • ISO 10360 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS)[Note 3]
    • ISO 10360-1:2000 Part 1: Vocabulary
    • ISO 10360-2:2009 Part 2: CMMs used for measuring linear dimensions
    • ISO 10360-3:2000 Part 3: CMMs with the axis of a rotary table as the fourth axis
    • ISO 10360-4:2000 Part 4: CMMs used in scanning measuring mode
    • ISO 10360-5:2010 Part 5: CMMs using single and multiple stylus contacting probing systems
    • ISO 10360-6:2001 Part 6: Estimation of errors in computing Gaussian associated features
    • ISO 10360-7:2011 Part 7: CMMs equipped with imaging probing systems
    • ISO 10360-8:2013 Part 8: CMMs with optical distance sensors
    • ISO 10360-9:2013 Part 9: CMMs with multiple probing systems
    • ISO 10360-10:2016 Part 10: Laser trackers for measuring point-to-point distances
    • ISO 10360-12:2016 Part 12: Articulated arm coordinate measurement machines (CMM)
  • ISO/IEC 10367:1991 Information technology - Standardized coded graphic character sets for use in 8-bit codes
  • ISO/IEC 10373 Identification cards – Test methods
    • ISO/IEC 10373-1:2006 Part 1: General characteristics
    • ISO/IEC 10373-2:2015 Part 2: Cards with magnetic stripes
    • ISO/IEC 10373-3:2010 Part 3: Integrated circuit cards with contacts and related interface devices
    • ISO/IEC 10373-5:2014 Part 5: Optical memory cards
    • ISO/IEC 10373-6:2016 Part 6: Proximity cards
    • ISO/IEC 10373-7:2008 Part 7: Vicinity cards
    • ISO/IEC 10373-8:2011 Part 8: USB-ICC
    • ISO/IEC 10373-9:2011 Part 9: Optical memory cards - Holographic recording method
  • ISO 10377:2013 Consumer product safety – Guidelines for suppliers
  • Pipework — Corrugated metal hoses and hose assemblies
  • ISO 10383:2012 Securities and related financial instruments – Codes for exchanges and market identification (MIC)
  • ISO 10386:1994 - Specification and conditions of delivery
  • ISO 10387:1994 Metal chrome - Specification and conditions of delivery
  • ISO 10393:2013 Consumer product recall – Guidelines for suppliers
  • Building materials and products – Hygrothermal properties – Tabulated design values and procedures for determining declared and design thermal values
  • ISO 10487 Passenger cars – Connections for car radios[Note 3]
  • ISO 10494:1993 Gas turbines and gas turbine sets – Measurement of emitted airborne noise – Engineering/survey method
  • ISO/IEC 10514 Information technology - Programming languages
    • ISO/IEC 10514-1:1996 Part 1: Modula-2, Base Language
    • ISO/IEC 10514-2:1998 Part 2: Generics Modula-2
    • ISO/IEC 10514-3:1998 Part 3: Object Oriented Modula-2
  • ISO 10524 Pressure regulators for use with medical gases
    • ISO 10524-1:2006 Part 1: Pressure regulators and pressure regulators with flow-metering devices
    • ISO 10524-2:2005 Part 2: Manifold and line pressure regulators
    • ISO 10524-3:2005 Part 3: Pressure regulators integrated with cylinder valves
    • ISO 10524-4:2008 Part 4: Low-pressure regulators
  • ISO 10534 Acoustics – Determination of sound absorption coefficient and impedance in impedance tubes
    • ISO 10534-1:1996 Part 1: Method using standing wave ratio
    • ISO 10534-2:1998 Part 2: Transfer-function method
  • ISO/IEC 10536 Identification cards – Contactless integrated circuit(s) cards – Close-coupled cards[Note 3]
    • ISO/IEC 10536-1:2000 Part 1: Physical characteristics
    • ISO/IEC 10536-2:1995 Part 2: Dimensions and location of coupling areas
    • ISO/IEC 10536-3:1996 Part 3: Electronic signals and reset procedures
  • ISO/IEC 10538:1991 Information technology - Control functions for text communication
  • Intravascular catheters – Sterile and single-use catheters
    • ISO 10555-1:2013 Part 1: General requirements
    • ISO 10555-3:2013 Part 3: Central venous catheters
    • ISO 10555-4:2013 Part 4: Balloon dilatation catheters
    • ISO 10555-5:2013 Part 5: Over-needle peripheral catheters
    • ISO 10555-6:2015 Part 6: Subcutaneous implanted ports
  • ISO/IEC 10561:1999 Information technology - Office equipment - Printing devices - Method for measuring throughput - Class 1 and Class 2 printers
  • ISO 10576 Statistical methods - Guidelines for the evaluation of conformity with specified requirements
    • ISO 10576-1:2003 Part 1: General principles
  • :2010 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Non-rigid parts
  • ISO 10585:1996 Information and documentation - Armenian alphabet coded character set for bibliographic information interchange
  • ISO 10586:1996 Information and documentation - Georgian alphabet coded character set for bibliographic information interchange
  • ISO/IEC 10588:1993 Information technology – Use of X.25 Packet Layer Protocol in conjunction with X.21/X.21 bis to provide the OSI connection-mode Network Service
  • ISO/IEC 10589:2002 Information technology – Telecommunications and information exchange between systems – Intermediate System to Intermediate System intra-domain routeing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO 8473)
  • ISO 10625:2005 Equipment for crop protection – Sprayer nozzles – Colour coding for identification
  • ISO 10628 Flow diagrams for process plants
  • ISO/IEC 10641:1993 Information technology - Computer graphics and image processing - Conformance testing of implementations of graphics standards
  • ISO/IEC 10646:2014 Information technology – Universal Coded Character Set (UCS)
  • ISO 10651 Lung ventilators for medical use – Particular requirements for basic safety and essential performance[Note 3]
    • ISO 10651-3:1997 Part 3: Particular requirements for emergency and transport ventilators
    • ISO 10651-4:2002 Part 4: Particular requirements for operator-powered resuscitators
    • ISO 10651-5:2006 Part 5: Gas-powered emergency resuscitators
    • ISO 10651-6:2004 Part 6: Home-care ventilatory support devices
  • ISO 10656:2016 Resistance welding equipment – Transformers – Integrated transformers for welding guns
  • ISO 10664 Hexalobular internal driving feature for bolts and screws – Torx screw head
  • ISO 10667 Assessment service delivery – Procedures and methods to assess people in work and organizational settings
    • ISO 10667-1:2011 Part 1: Requirements for the client
    • ISO 10667-2:2011 Part 2: Requirements for service providers
  • ISO 10668:2010 Brand valuation - Requirements for monetary brand valuation
  • ISO 10685 Ophthalmic optics – Spectacle frames and sunglasses electronic catalogue and identification
    • ISO 10685-1:2011 Part 1: Product identification and electronic catalogue product hierarchy
    • ISO 10685-2:2016 Part 2: Commercial information
    • ISO 10685-3:2012 Part 3: Technical information
  • ISO 10703:2007 Water quality - Determination of the activity concentration of radionuclides - Method by high resolution gamma-ray spectrometry
  • ISO 10705 Water quality – Detection and enumeration of bacteriophages
    • ISO 10705-1:1995 Part 1: Enumeration of F-specific RNA bacteriophages
    • ISO 10705-2:2000 Part 2: Enumeration of somatic coliphages
    • ISO 10705-3:2003 Part 3: Validation of methods for concentration of bacteriophages from water
    • ISO 10705-4:2001 Part 4: Enumeration of bacteriophages infecting Bacteroides fragilis
  • ISO 10711:2012 Intelligent Transport Systems – Interface Protocol and Message Set Definition between Traffic Signal Controllers and Detectors
  • ISO 10718:2015 Cork stoppers – Characterization of a low-in-germs stopper, through the enumeration of colony-forming units of yeasts, moulds and bacteria, capable of both being extracted and growing in alcoholic medium
  • ISO 10725:2000 Acceptance sampling plans and procedures for the inspection of bulk materials
  • ISO/IEC 10728:1993 Information technology – Information Resource Dictionary System (IRDS) Services Interface
  • ISO/IEC 10731:1994 Information technology - Open Systems Interconnection - Basic Reference Model - Conventions for the definition of OSI services
  • ISO/IEC 10732:1993 Information technology – Use of X.25 Packet Layer Protocol to provide the OSI connection-mode Network Service over the telephone network
  • ISO/IEC 10733:1998 Information technology – Elements of management information related to the OSI Network Layer
  • ISO/IEC 10736:1995 Information technology – Telecommunications and information exchange between systems – Transport layer security protocol
  • ISO/IEC 10737:1998 Information technology – Elements of management information related to OSI Transport layer
  • ISO/IEC 10741 Information technology – User system interfaces – Dialogue interaction
    • ISO/IEC 10741-1:1995 Part 1: Cursor control for text editing
  • ISO/IEC 10742:1994 Information technology – Telecommunications and information exchange between systems – Elements of management information related to OSI Data Link Layer standards
  • ISO/IEC 10744:1997 Information technology - Hypermedia/Time-based Structuring Language (HyTime)
  • ISO/IEC 10745:1995 Information technology - Open Systems Interconnection - Upper layers security model
  • ISO/IEC 10746 Information technology—Open Distributed Processing—Reference model
    • ISO/IEC 10746-1:1998 Overview
    • ISO/IEC 10746-2:2009 Foundations
    • ISO/IEC 10746-3:2009 Architecture
    • ISO/IEC 10746-4:1998 Architectural semantics
  • ISO/IEC 10747:1994 Information technology – Telecommunications and information exchange between systems – Protocol for exchange of inter-domain routeing information among intermediate systems to support forwarding of ISO 8473 PDUs
  • ISO 10754:1996 Information and documentation - Extension of the Cyrillic alphabet coded character set for non-Slavic languages for bibliographic information interchange
  • ISO/IEC 10779:2008 Information technology – Office equipment accessibility guidelines for elderly persons and persons with disabilities
  • ISO/HL7 10781:2015 Health Informatics – HL7 Electronic Health Records-System Functional Model, Release 2 (EHR FM)
  • ISO 10782 Definitions and attributes of data elements for control and monitoring of textile processes
    • ISO 10782-1:1998 Part 1: Spinning, spinning preparatory and related processes
  • ISO 10790:2015 Measurement of fluid flow in closed conduits – Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
  • ISO 10795:2011 Space systems – Programme management and quality – Vocabulary
  • ISO/TS 10797:2012 Nanotechnologies – Characterization of single-wall carbon nanotubes using transmission electron microscopy
  • ISO/TS 10798:2011 Nanotechnologies – Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
  • ISO 10801:2010 Nanotechnologies – Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
  • ISO 10807:1994 Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres
  • ISO 10808:2010 Nanotechnologies – Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing
  • ISO/TS 10811 Mechanical vibration and shock – Vibration and shock in buildings with sensitive equipment
    • ISO/TS 10811-1:2000 Part 1: Measurement and evaluation
    • ISO/TS 10811-2:2000 Part 2: Classification
  • ISO 10813 Vibration generating machines – Guidance for selection
    • ISO 10813-1:2004 Part 1: Equipment for environmental testing
  • ISO 10815:2016 Mechanical vibration – Measurement of vibration generated internally in railway tunnels by the passage of trains
  • ISO 10816 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts
    • ISO 10816-1:1995 Part 1: General guidelines
    • ISO 10816-2:2009 Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
    • ISO 10816-3:2009 Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
    • ISO 10816-4:2009 Part 4: Gas turbine sets with fluid-film bearings
    • ISO 10816-5:2000 Part 5: Machine sets in hydraulic power generating and pumping plants
    • ISO 10816-6:1995 Part 6: Reciprocating machines with power ratings above 100 kW
    • ISO 10816-7:2009 Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
    • ISO 10816-8:2014 Part 8: Reciprocating compressor systems
    • ISO 10816-21:2015 Part 21: Horizontal axis wind turbines with gearbox
  • ISO 10817 Rotating shaft vibration measuring systems
    • ISO 10817-1:1998 Part 1: Relative and absolute sensing of radial vibration
  • ISO 10825:1995 Gears - Wear and damage to gear teeth - Terminology
  • ISO 10843:1997 Acoustics – Methods for the description and physical measurement of single impulses or series of impulses
  • ISO 10844:2014 Acoustics – Specification of test tracks for measuring noise emitted by road vehicles and their tyres
  • ISO 10846 Acoustics and vibration – Laboratory measurement of vibro-acoustic transfer properties of resilient elements
    • ISO 10846-1:2008 Part 1: Principles and guidelines
    • ISO 10846-2:2008 Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
    • ISO 10846-3:2002 Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
    • ISO 10846-4:2003 Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
    • ISO 10846-5:2008 Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
  • ISO 10847:1997 Acoustics – In-situ determination of insertion loss of outdoor noise barriers of all types
  • ISO/IEC 10859:1997 Information technology - 8-bit backplane interface: STEbus and mechanical core specifications for microcomputers
  • ISO/IEC 10861:1994 Information technology - Microprocessor systems - High-performance synchronous 32-bit bus: MULTIBUS II
  • ISO/TS 10867:2010 Nanotechnologies – Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
  • ISO/TS 10868:2017 Nanotechnologies – Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
  • ISO 10878:2013 Non-destructive testing - Infrared thermography - Vocabulary
  • ISO/IEC 10885:1993 Information technology - 356 mm optical disk cartridge for information interchange - Write once
  • ISO/IEC 10918 Information technology - Digital compression and coding of continuous-tone still images
  • ISO/TR 10929:2012 Nanotechnologies – Characterization of multiwall carbon nanotube (MWCNT) samples
  • ISO 10934 Optics and optical instruments - Vocabulary for microscopy
    • ISO 10934-1:2002 Part 1: Light microscopy
    • ISO 10934-2:2007 Part 2: Advanced techniques in light microscopy
  • ISO 10936 Optics and photonics – Operation microscopes
    • ISO 10936-1:2017 Part 1: Requirements and test methods
    • ISO 10936-2:2010 Part 2: Light hazard from operation microscopes used in ocular surgery
  • ISO 10938:2016 Ophthalmic optics – Chart displays for visual acuity measurement – Printed, projected and electronic
  • ISO 10939:2017 Ophthalmic instruments – Slit-lamp microscopes
  • ISO 10940:2009 Ophthalmic instruments – Fundus cameras
  • ISO 10942:2006 Ophthalmic instruments – Direct ophthalmoscopes
  • ISO 10943:2011 Ophthalmic instruments – Indirect ophthalmoscopes
  • ISO 10944:2009 Ophthalmic instruments – Synoptophores
  • ISO 10957:2009 Information and documentation – International standard music number (ISMN)
  • ISO 10962:2015 Securities and related financial instruments – Classification of financial instruments (CFI code)
  • ISO/IEC 10967 Information technology – Language independent arithmetic
  • ISO/TS 10974:2012 Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device
  • ISO 10985:2009 Caps made of aluminium-plastics combinations for infusion bottles and injection vials – Requirements and test methods
  • ISO 10991:2009 Micro process engineering – Vocabulary
  • ISO/TR 10992:2011 Intelligent transport systems – Use of nomadic and portable devices to support ITS service and multimedia provision in vehicles
  • ISO 10993 Biological evaluation of medical devices
  • ISO/IEC 10994:1992 Information technology – Data interchange on 90 mm flexible disk cartridges using modified frequency modulation recording at 31 831 ftprad on 80 tracks on each side – ISO Type 303
  • ISO/IEC 10995:2011 Information technology - Digitally recorded media for information interchange and storage - Test method for the estimation of the archival lifetime of optical media

ISO 11000 – ISO 11999

  • ISO/IEC 11002:2008 Information technology - Multipath management API
  • ISO 11005:2010 Technical product documentation – Use of main documents
  • ISO 11011:2013 Compressed air - Energy efficiency - Assessment[3]
  • ISO 11014:2009 Safety data sheet for chemical products - Content and order of sections
  • ISO/IEC TR 11017:1998 Information technology - Framework for internationalization
  • ISO 11040 Prefilled syringes
    • ISO 11040-1:2015 Part 1: Glass cylinders for dental local anaesthetic cartridges
    • ISO 11040-2:2011 Part 2: Plunger stoppers for dental local anaesthetic cartridges
    • ISO 11040-3:2012 Part 3: Seals for dental local anaesthetic cartridges
    • ISO 11040-4:2015 Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
    • ISO 11040-5:2012 Part 5: Plunger stoppers for injectables
    • ISO 11040-6:2012 Part 6: Plastic barrels for injectables
    • ISO 11040-7:2015 Part 7: Packaging systems for sterilized subassembled syringes ready for filling
    • ISO 11040-8:2016 Part 8: Requirements and test methods for finished prefilled syringes
  • Ergonomic design of control centres
    • ISO 11064-1:2000 Principles for the design of control centres
    • ISO 11064-2:2000 Principles for the arrangement of control suites
    • ISO 11064-3:1999 Control room layout ISO 11064-3:1999/Cor 1:2002
    • ISO 11064-4:2013 Layout and dimensions of workstations
    • ISO 11064-5:2008 Displays and controls
    • ISO 11064-6:2005 Environmental requirements for control centres
    • ISO 11064-7:2006 Principles for the evaluation of control centres
  • ISO/TR 11065:1992 Industrial automation glossary
  • ISO 11067:2015 Intelligent transport systems – Curve speed warning systems (CSWS) – Performance requirements and test procedures
  • ISO 11070:2014 Sterile single-use intravascular introducers, dilators and guidewires
  • ISO/IEC 11072:1992 Information technology - Computer graphics - Computer Graphics Reference Model
  • ISO/IEEE 11073 Health informatics - Point-of-care medical device communication
  • ISO 11074:2015 Soil quality - Vocabulary
  • ISO 11086:1996 Gas turbines - Vocabulary
  • ISO 11091:1994 Construction drawings – Landscape drawing practice
  • ISO 11095:1996 Linear calibration using reference materials
  • ISO 11107:2009 Recreational diving services – Requirements for training programmes on enriched air nitrox (EAN) diving
  • ISO 11108:1996 Information and documentation - Archival paper - Requirements for permanence and durability
  • ISO 11117:2008 Gas cylinders – Valve protection caps and valve guards – Design, construction and tests
  • Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing
  • ISO 11121:2017 Recreational diving services – Requirements for introductory programmes to scuba diving
  • ISO 11124 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives
    • ISO 11124-1:1993 Part 1: General introduction and classification
    • ISO 11124-2:1993 Part 2: Chilled-iron grit
    • ISO 11124-3:1993 Part 3: High-carbon cast-steel shot and grit
    • ISO 11124-4:1993 Part 4: Low-carbon cast-steel shot
  • ISO 11125 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives
    • ISO 11125-1:1993 Part 1: Sampling
    • ISO 11125-2:1993 Part 2: Determination of particle size distribution
    • ISO 11125-3:1993 Part 3: Determination of hardness
    • ISO 11125-4:1993 Part 4: Determination of apparent density
    • ISO 11125-5:1993 Part 5: Determination of percentage defective particles and of microstructure
    • ISO 11125-6:1993 Part 6: Determination of foreign matter
    • ISO 11125-7:1993 Part 7: Determination of moisture
  • ISO 11126 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives
    • ISO 11126-1:1993 Part 1: General introduction and classification
    • ISO 11126-3:1993 Part 3: Copper refinery slag
    • ISO 11126-4:1993 Part 4: Coal furnace slag
    • ISO 11126-5:1993 Part 5: Nickel refinery slag
    • ISO 11126-6:1993 Part 6: Iron furnace slag
    • ISO 11126-7:1995 Part 7: Fused aluminium oxide
    • ISO 11126-8:1993 Part 8: Olivine sand
    • ISO 11126-9:1999 Part 9: Staurolite
    • ISO 11126-10:2000 Part 10: Almandite garnet
  • ISO 11127 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives
    • ISO 11127-1:2011 Part 1: Sampling
    • ISO 11127-2:2011 Part 2: Determination of particle size distribution
    • ISO 11127-3:2011 Part 3: Determination of apparent density
    • ISO 11127-4:2011 Part 4: Assessment of hardness by a glass slide test
    • ISO 11127-5:2011 Part 5: Determination of moisture
    • ISO 11127-6:2011 Part 6: Determination of water-soluble contaminants by conductivity measurement
    • ISO 11127-7:2011 Part 7: Determination of water-soluble chlorides
  • ISO 11133:2014 Microbiology of food, animal feed and water – Preparation, production, storage and performance testing of culture media
  • :2014 Sterilization of health-care products—Ethylene oxide—Requirements for the development, validation and routine control of a sterilization process for medical devices
  • Sterilization of health care products – Radiation
  • ISO 11138 Sterilization of health care products - Biological indicators
    • ISO 11138-1:2017 Part 1: General requirements
    • ISO 11138-2:2017 Part 2: Biological indicators for ethylene oxide sterilization processes
    • ISO 11138-3:2017 Part 3: Biological indicators for moist heat sterilization processes
    • ISO 11138-4:2017 Part 4: Biological indicators for dry heat sterilization processes
    • ISO 11138-5:2017 Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes
  • ISO/TS 11139:2006 Sterilization of health care products - Vocabulary
  • ISO 11145:2016 Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols
  • ISO 11146 Lasers and laser-related equipment – Test methods for laser beam widths, divergence angles and beam propagation ratios
    • ISO 11146-1:2005 Part 1: Stigmatic and simple astigmatic beams
    • ISO 11146-2:2005 Part 2: General astigmatic beams
    • ISO/TR 11146-3:2004 Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods
  • ISO 11151 Lasers and laser-related equipment – Standard optical components
    • ISO 11151-1:2015 Part 1: Components for the UV, visible and near-infrared spectral ranges
    • ISO 11151-2:2015 Part 2: Components for the infrared spectral range
  • ISO 11156:2011 Packaging - Accessible design - General requirements
  • ISO/IEC 11160 Information technology - Office equipment - Minimum information to be included in specification sheets - Printers
    • ISO/IEC 11160-1:1996 Part 1: Class 1 and Class 2 printers
    • ISO/IEC 11160-2:2013 Part 2: Class 3 and Class 4 printers
  • ISO 11170:2003 Hydraulic fluid power – Filter elements – Sequence of tests for verifying performance characteristics
  • ISO 11171:2010 Hydraulic fluid power – Calibration of automatic particle counters for liquids
  • ISO/IEC 11172 Information technology – Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s
  • ISO/IEC 11179 Information technology – Metadata registries (MDR)
  • ISO 11192:2005 Small craft - Graphical symbols
  • ISO 11195:1995 Gas mixers for medical use – Stand-alone gas mixers
  • ISO 11197:2016 Medical supply units
  • ISO 11200:2014 Acoustics – Noise emitted by machinery and equipment – Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
  • ISO 11201:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
  • ISO 11202:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
  • ISO 11203:1995 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
  • ISO 11204:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
  • ISO 11205:2003 Acoustics – Noise emitted by machinery and equipment – Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
  • ISO/TR 11219:2012 Information and documentation - Qualitative conditions and basic statistics for library buildings - Space, function and design
  • ISO 11224:2003 Textiles – Web formation and bonding in nonwovens – Vocabulary
  • ISO 11238:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated information on substances
  • ISO 11239:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of administration and packaging
  • ISO 11240:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of units of measurement
  • ISO/TS 11251:2010 Nanotechnologies – Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
  • ISO 11252:2013 Lasers and laser-related equipment – Laser device – Minimum requirements for documentation
  • ISO 11270:2014 Intelligent transport systems – Lane keeping assistance systems (LKAS) – Performance requirements and test procedures
  • ISO 11290 Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp.
    • ISO 11290-1:2017 Part 1: Detection method
    • ISO 11290-2:2017 Part 2: Enumeration method
  • ISO/TS 11308:2011 Nanotechnologies – Characterization of single-wall carbon nanotubes using thermogravimetric analysis
  • ISO 11318:2002 Cardiac defibrillators – Connector assembly DF-1 for implantable defibrillators – Dimensions and test requirements
  • ISO/IEC 11319:1993 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording
  • ISO/IEC 11321:1992 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DATA/DAT format
  • ISO 11323:2010 Iron ore and direct reduced iron – Vocabulary
  • ISO/TR 11328:1994 Measurement of liquid flow in open channels – Equipment for the measurement of discharge under ice conditions
  • ISO 11329:2001 Hydrometric determinations – Measurement of suspended sediment transport in tidal channels
  • ISO 11357 Plastics – Differential scanning calorimetry (DSC)
    • ISO 11357-1:2009 General principles
    • ISO 11357-2:2013 Determination of glass transition temperature and glass transition step height
    • ISO 11357-3:2011 Determination of temperature and enthalpy of melting and crystallization
    • ISO 11357-4:2005 Determination of specific heat capacity
    • ISO 11357-5:2013 Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
    • ISO 11357-6:2008 Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
    • ISO 11357-7:2002 Determination of crystallization kinetics
  • ISO/TR 11360:2010 Nanotechnologies – Methodology for the classification and categorization of nanomaterials
  • ISO 11375:1998 Building construction machinery and equipment – Terms and definitions
  • ISO 11380:1994 Optics and optical instruments – Ophthalmic optics – Formers
  • ISO 11381:2016 Ophthalmic optics – Spectacle frames – Screw threads
  • ISO 11400:1992 Nickel, ferronickel and nickel alloys - Determination of phosphorus content - Phosphovanadomolybdate molecular absorption spectrometric method
  • ISO/IEC 11404:2007 Information technology – General-Purpose Datatypes (GPD)
  • ISO/IEC 11411:1995 Information technology - Representation for human communication of state transition of software
  • ISO 11418 Containers and accessories for pharmaceutical preparations
    • ISO 11418-1:2016 Part 1: Drop-dispensing glass bottles
    • ISO 11418-2:2016 Part 2: Screw-neck glass bottles for syrups
    • ISO 11418-3:2016 Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms
    • ISO 11418-5:2015 Part 5: Dropper assemblies
    • ISO 11418-7:2016 Part 7: Screw-neck vials made of glass tubing for liquid dosage forms
  • ISO 11421:1997 Optics and optical instruments - Accuracy of optical transfer function (OTF) measurement
  • ISO 11442:2006 Technical product documentation – Document management
  • ISO 11446:2004 Road vehicles – Connectors for the electrical connection of towing and towed vehicles – 13-pole connectors for vehicles with 12 V nominal supply voltage
  • ISO 11450:1999 Equipment for harvesting and conservation – Round balers – Terminology and commercial specifications
  • ISO 11451 Road vehicles – Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy
    • ISO 11451-1:2015 Part 1: General principles and terminology
    • ISO 11451-2:2015 Part 2: Off-vehicle radiation sources
    • ISO 11451-3:2015 Part 3: On-board transmitter simulation
    • ISO 11451-4:2013 Part 4: Bulk current injection (BCI)
  • ISO 11452 Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy
    • ISO 11452-1:2015 Part 1: General principles and terminology
    • ISO 11452-2:2004 Part 2: Absorber-lined shielded enclosure
    • ISO 11452-3:2016 Part 3: Transverse electromagnetic (TEM) cell
    • ISO 11452-4:2011 Part 4: Harness excitation methods
    • ISO 11452-5:2002 Part 5: Stripline
    • ISO 11452-7:2003 Part 7: Direct radio frequency (RF) power injection
    • ISO 11452-8:2015 Part 8: Immunity to magnetic fields
    • ISO 11452-9:2012 Part 9: Portable transmitters
    • ISO 11452-10:2009 Part 10: Immunity to conducted disturbances in the extended audio frequency range
    • ISO 11452-11:2010 Part 11: Reverberation chamber
  • ISO 11453:1996 Statistical interpretation of data - Tests and confidence intervals relating to proportions
  • ISO/IEC 11458:1993 Information technology - Microprocessor systems - VICbus - Inter-crate cable bus
  • ISO 11462 Guidelines for implementation of statistical process control (SPC)
    • ISO 11462-1:2001 Part 1: Elements of SPC
    • ISO 11462-2:2010 Part 2: Catalogue of tools and techniques
  • :2000 Plastics – Generic identification and marking of plastics products
  • ISO 11484:2009 Steel products – Employer's qualification system for non-destructive testing (NDT) personnel
  • ISO 11485 Glass in building – Curved glass
    • ISO 11485-1:2011 Part 1: Terminology and definitions
  • ISO/TR 11487:2008 Health informatics – Clinical stakeholder participation in the work of ISO TC 215
  • ISO 11491:2017 Implants for surgery – Determination of impact resistance of ceramic femoral heads for hip joint prostheses
  • ISO 11499:2014 Dentistry – Single-use cartridges for local anaesthetics
  • ISO/IEC 11518 Information technology - High-Performance Parallel Interface
    • ISO/IEC 11518-1:1995 Part 1: Mechanical, electrical and signalling protocol specification (HIPPI-PH)
    • ISO/IEC 11518-2:2000 Part 2: Framing Protocol (HIPPI-FP)
    • ISO/IEC 11518-3:1996 Part 3: Encapsulation of ISO/IEC 8802-2 (IEEE Std 802.2) Logical Link Control Protocol Data Units (HIPPI-LE)
    • ISO/IEC 11518-6:2000 Part 6: Physical Switch Control (HIPPI-SC)
    • ISO/IEC 11518-9:1999 Part 9: Serial specification (HIPPI-Serial)
    • ISO/IEC 11518-10:2001 Part 10: 6400 Mbit/s Physical Layer (HIPPI-6400-PH)
  • ISO 11532:2012 Aircraft ground equipment - Graphical symbols
  • ISO/IEC 11544:1993 Information technology - Coded representation of picture and audio information - Progressive bi-level image compression
  • ISO 11546 Acoustics – Determination of sound insulation performances of enclosures
    • ISO 11546-1:1995 Part 1: Measurements under laboratory conditions (for declaration purposes)
    • ISO 11546-2:1995 Part 2: Measurements in situ (for acceptance and verification purposes)
  • ISO/TR 11548 Communication aids for blind persons - Identifiers, names and assignation to coded character sets for 8-dot Braille characters
    • ISO/TR 11548-1:2001 Part 1: General guidelines for Braille identifiers and shift marks
    • ISO/TR 11548-2:2001 Part 2: Latin alphabet based character sets
  • ISO 11551:2003 Optics and optical instruments – Lasers and laser-related equipment – Test method for absorptance of optical laser components
  • ISO 11553 Safety of machinery – Laser processing machines
    • ISO 11553-1:2005 Part 1: General safety requirements
    • ISO 11553-2:2007 Part 2: Safety requirements for hand-held laser processing devices
    • ISO 11553-3:2013 Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)
  • ISO 11554:2017 Optics and photonics – Lasers and laser-related equipment – Test methods for laser beam power, energy and temporal characteristics
  • ISO/IEC 11557:1992 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-DC format using 60 m and 90 m length tapes
  • ISO/IEC 11558:1992 Information technology – Data compression for information interchange – Adaptive coding with embedded dictionary – DCLZ Algorithm
  • ISO/IEC 11559:1993 Information technology – Data interchange on 12,7 mm wide 18-track magnetic tape cartridges – Extended format
  • ISO/IEC 11560:1992 Information technology - Information interchange on 130 mm optical disk cartridges using the magneto-optical effect, for write once, read multiple functionality
  • ISO 11568 Financial services – Key management (retail)[Note 3]
    • ISO 11568-1:2005 Part 1: Principles
    • ISO 11568-2:2012 Part 2: Symmetric ciphers, their key management and life cycle
    • ISO 11568-4:2007 Part 4: Asymmetric cryptosystems – Key management and life cycle
  • ISO/IEC 11569:1993 Information technology – Telecommunications and information exchange between systems – 26-pole interface connector mateability dimensions and contact number assignments
  • ISO/IEC 11570:1992 Information technology – Telecommunications and information exchange between systems – Open Systems Interconnection – Transport protocol identification mechanism
  • ISO/IEC 11571:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Networks – Addressing
  • ISO/IEC 11572:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit mode bearer services – Inter-exchange signalling procedures and protocol
  • ISO/IEC 11573:1994 Information technology – Telecommunications and information exchange between systems – Synchronization methods and technical requirements for Private Integrated Services Networks
  • ISO/IEC 11574:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit-mode 64 kbit/s bearer services – Service description, functional capabilities and information flows
  • ISO/IEC 11575:1995 Information technology – Telecommunications and information exchange between systems – Protocol mappings for the OSI Data Link service
  • ISO/IEC 11576:1994 Information technology – Procedure for the registration of algorithms for the lossless compression of data
  • ISO/IEC 11577:1995 Information technology – Open Systems Interconnection – Network layer security protocol
  • :1996 Information technologyOpen Systems InterconnectionRemote procedure call (RPC)
  • ISO/IEC 11579 Information technology – Telecommunications and information exchange between systems – Private integrated services network
    • ISO/IEC 11579-1:1994 Part 1: Reference configuration for PISN Exchanges (PINX)
    • ISO/IEC 11579-2:1999 Part 2: Reference configuration for HS-PISN Exchanges (HS-PINX)
    • ISO/IEC 11579-3:1999 Part 3: Reference configuration for PINX extension lines
  • ISO/IEC TR 11580:2007 Information technology – Framework for describing user interface objects, actions and attributes
  • ISO/IEC 11581 Information technology – User interface icons[Note 3]
    • ISO/IEC 11581-1:2000 Part 1: Icons – General
    • ISO/IEC TR 11581-1:2011 Part 1: Introduction to and overview of icon standards
    • ISO/IEC 11581-2:2000 Part 2: Object icons
    • ISO/IEC 11581-3:2000 Part 3: Pointer icons
    • ISO/IEC 11581-5:2004 Part 5: Tool icons
    • ISO/IEC 11581-6:1999 Part 6: Action icons
    • ISO/IEC 11581-10:2010 Part 10: Framework and general guidance
    • ISO/IEC 11581-40:2011 Part 40: Management of icon registration
    • ISO/IEC TS 11581-41:2014 Part 41: Data structure to be used by the ISO/IEC JTC 1/SC 35 icon database
  • ISO/IEC 11582:2002 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Generic functional protocol for the support of supplementary services – Inter-exchange signalling procedures and protocol
  • ISO/TR 11583:2012 Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits
  • ISO/IEC 11584:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit-mode multi-rate bearer services – Service description, functional capabilities and information flows
  • ISO/IEC 11586 Information technology - Open Systems Interconnection - Generic upper layers security
    • ISO/IEC 11586-1:1996 Overview, models and notation
    • ISO/IEC 11586-2:1996 Security Exchange Service Element (SESE) service definition
    • ISO/IEC 11586-3:1996 Security Exchange Service Element (SESE) protocol specification
    • ISO/IEC 11586-4:1996 Protecting transfer syntax specification
    • ISO/IEC 11586-5:1997 Security Exchange Service Element (SESE) Protocol Implementation Conformance Statement (PICS) proforma
    • ISO/IEC 11586-6:1997 Protecting transfer syntax Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/IEC 11587:1996 Information technology – Open Systems Interconnection – Application Context for Systems Management with Transaction Processing
  • ISO 11593:1996 Manipulating industrial robots - Automatic end effector exchange systems - Vocabulary and presentation of characteristics
  • ISO 11607:2006 Packaging for Terminally Sterilized Medical Devices
  • ISO 11608 Needle-based injection systems for medical use – Requirements and test methods[Note 3]
    • ISO 11608-1:2014 Part 1: Needle-based injection systems
    • ISO 11608-2:2012 Part 2: Needles
    • ISO 11608-3:2012 Part 3: Finished containers
    • ISO 11608-4:2006 Part 4: Requirements and test methods for electronic and electromechanical pen-injectors
    • ISO 11608-5:2012 Part 5: Automated functions
    • ISO 11608-7:2016 Part 7: Accessibility for persons with visual impairment
  • ISO 11609:2017 Dentistry - Dentifrices - Requirements, test methods and marking
  • ISO/TR 11610:2004 Protective clothing - Vocabulary
  • ISO 11615:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated medicinal product information
  • ISO 11616:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated pharmaceutical product information
  • ISO 11620:2014 Information and documentation - Library performance indicators
  • ISO 11631:1998 Measurement of fluid flow – Methods of specifying flowmeter performance
  • ISO/TR 11633 Health informatics – Information security management for remote maintenance of medical devices and medical information systems
    • ISO/TR 11633-1:2009 Part 1: Requirements and risk analysis
    • ISO/TR 11633-2:2009 Part 2: Implementation of an information security management system (ISMS)
  • ISO/TR 11636:2009 Health Informatics – Dynamic on-demand virtual private network for health information infrastructure
  • ISO 11648 Statistical aspects of sampling from bulk materials
    • ISO 11648-1:2003 Part 1: General principles
    • ISO 11648-2:2001 Part 2: Sampling of particulate materials
  • ISO 11649:2009 Financial services – Core banking – Structured creditor reference to remittance information
  • ISO/TR 11651:2015 Estimation of sediment deposition in reservoirs using one dimensional simulation models
  • ISO 11655:1995 Measurement of liquid flow in open channels – Method of specifying performance of hydrometric equipment
  • ISO 11657:2014 Hydrometry – Suspended sediment in streams and canals – Determination of concentration by surrogate techniques
  • ISO 11658:2012 Cardiovascular implants and extracorporeal systems – Blood/tissue contact surface modifications for extracorporeal perfusion systems
  • ISO 11663:2014 Quality of dialysis fluid for haemodialysis and related therapies
  • ISO 11664 Colorimetry
    • ISO 11664-1:2007 Part 1: CIE standard colorimetric observers
    • ISO 11664-2:2007 Part 2: CIE standard illuminants
    • ISO 11664-3:2012 Part 3: CIE tristimulus values
    • ISO 11664-4:2008 Part 4: CIE 1976 L*a*b* Colour space
    • ISO/CIE 11664-5:2016 Part 5: CIE 1976 L*u*v* colour space and u', v' uniform chromaticity scale diagram
    • ISO/CIE 11664-6:2014 Part 6: CIEDE2000 Colour-difference formula
  • ISO 11665 Measurement of radioactivity in the environment - Air: radon-222
    • ISO 11665-1:2012 Part 1: Origins of radon and its short-lived decay products and associated measurement methods
    • ISO 11665-2:2012 Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products
    • ISO 11665-3:2012 Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products
    • ISO 11665-4:2012 Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
    • ISO 11665-5:2012 Part 5: Continuous measurement method of the activity concentration
    • ISO 11665-6:2012 Part 6: Spot measurement method of the activity concentration
    • ISO 11665-7:2012 Part 7: Accumulation method for estimating surface exhalation rate
    • ISO 11665-8:2012 Part 8: Methodologies for initial and additional investigations in buildings
    • ISO 11665-9:2016 Part 9: Test methods for exhalation rate of building materials
    • ISO 11665-11:2016 Part 11: Test method for soil gas with sampling at depth
  • ISO/TS 11669:2012 Translation projects - General guidance
  • ISO 11670:2003 Lasers and laser-related equipment – Test methods for laser beam parameters – Beam positional stability
  • ISO/TS 11672:2016 Connectors for fluid power and general use - Designation and nomenclature
  • ISO 11675:2005 Textile machinery and accessories – Flatbed knitting machines – Vocabulary
  • ISO 11676:2014 Textile machinery and accessories – Pattern disks and pattern chains for warp knitting machines – Vocabulary and symbols
  • ISO 11683:1997 Packaging - Tactile warnings of danger - Requirements
  • ISO 11684:1995 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Safety signs and hazard pictorials - General principles
  • ISO/TR 11688 Acoustics – Recommended practice for the design of low-noise machinery and equipment
    • ISO/TR 11688-1:1995 Part 1: Planning
    • ISO/TR 11688-2:1998 Part 2: Introduction to the physics of low-noise design
  • ISO 11689:1996 Acoustics – Procedure for the comparison of noise-emission data for machinery and equipment
  • ISO/IEC 11693 Identification cards – Optical memory cards
    • ISO/IEC 11693-1:2012 Part 1: General characteristics
    • ISO/IEC 11693-2:2009 Part 2: Co-existence of optical memory with other machine readable technologies
    • ISO/IEC 11693-3:2015 Part 3: Authentication techniques
  • ISO/IEC 11694 Identification cards – Optical memory cards – Linear recording method
    • ISO/IEC 11694-1:2012 Part 1: Physical characteristics
    • ISO/IEC 11694-2:2012 Part 2: Dimensions and location of the accessible optical area
    • ISO/IEC 11694-3:2015 Part 3: Optical properties and characteristics
    • ISO/IEC 11694-4:2008 Part 4: Logical data structures
    • ISO/IEC 11694-5:2014 Part 5: Data format for information interchange for applications using ISO/IEC 11694-4
    • ISO/IEC 11694-6:2014 Part 6: Use of biometrics on an optical memory card
  • ISO/IEC 11695 Identification cards – Optical memory cards – Holographic recording method
    • ISO/IEC 11695-1:2015 Part 1: Physical characteristics
    • ISO/IEC 11695-2:2015 Part 2: Dimensions and location of accessible optical area
    • ISO/IEC 11695-3:2017 Part 3: Optical properties and characteristics
  • ISO 11704:2010 Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method
  • ISO 11712:2009 Anaesthetic and respiratory equipment – Supralaryngeal airways and connectors
  • ISO 11731:2017 Water quality - Enumeration of Legionella
  • ISO 11737 Sterilization of medical devices – Microbiological methods
    • ISO 11737-1:2006 Part 1: Determination of a population of microorganisms on products
    • ISO 11737-2:2009 Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process
  • ISO/IEC 11756:1999 Information technology - Programming languages - M
  • ISO/TR 11766:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – Security considerations for lawful interception
  • ISO/TR 11769:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – Data retention for law enforcement
  • ISO/IEC 11770 Information technology - Security techniques - Key management
    • ISO/IEC 11770-1:2010 Part 1: Framework
    • ISO/IEC 11770-2:2008 Part 2: Mechanisms using symmetric techniques
    • ISO/IEC 11770-3:2015 Part 3: Mechanisms using asymmetric techniques
    • ISO/IEC 11770-4:2006 Part 4: Mechanisms based on weak secrets
    • ISO/IEC 11770-5:2011 Part 5: Group key management
    • ISO/IEC 11770-6:2016 Part 6: Key derivation
  • ISO/TS 11774:2011 Non-destructive testing – Performance-based qualification
  • ISO 11783 Tractors and machinery for agriculture and forestry – Serial control and communications data network
  • ISO 11798:1999 Information and documentation - Permanence and durability of writing, printing and copying on paper - Requirements and test methods
  • ISO 11799:2015 Information and documentation - Document storage requirements for archive and library materials
  • ISO 11800:1998 Information and documentation – Requirements for binding materials and methods used in the manufacture of books
  • ISO/IEC 11801:2002 Information technology – Generic cabling for customer premises[Note 3]
    • ISO/IEC TR 11801-9901:2014 Part 9901: Guidance for balanced cabling in support of at least 40 Gbit/s data transmission
    • ISO/IEC TR 11801-9902:2017 Part 9902: Specifications for End-to-end link configurations
    • ISO/IEC TR 11801-9903:2015 Part 9903: Matrix modelling of channels and links
    • ISO/IEC TR 11801-9904:2017 Part 9904: Guidelines for the use of installed cabling to support 2,5GBASE -T and 5GBASE -T applications
  • ISO/IEC TR 11802 Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Technical reports and guidelines
    • ISO/IEC TR 11802-5:1997 Part 5: Media Access Control (MAC) Bridging of Ethernet V2.0 in Local Area Networks
  • ISO 11807 Integrated optics - Vocabulary
    • ISO 11807-1:2001 Part 1: Basic terms and symbols
    • ISO 11807-2:2001 Part 2: Terms used in classification
  • ISO 11810:2015 Lasers and laser-related equipment – Test method and classification for the laser resistance of surgical drapes and/or patient protective covers – Primary ignition, penetration, flame spread and secondary ignition
  • ISO/TR 11811:2012 Nanotechnologies – Guidance on methods for nano- and microtribology measurements
  • ISO 11819 Acoustics – Measurement of the influence of road surfaces on traffic noise[Note 3]
    • ISO 11819-1:1997 Part 1: Statistical Pass-By method
    • ISO 11819-2:2017 Part 2: The close-proximity method
    • ISO/TS 11819-3:2017 Part 3: Reference tyres
    • ISO/PAS 11819-4:2013 Part 4: SPB method using backing board
  • ISO 11821:1997 Acoustics – Measurement of the in situ sound attenuation of a removable screen
  • ISO 11822:1996 Information and documentation - Extension of the Arabic alphabet coded character set for bibliographic information interchange
  • ISO 11838:1997 Motorcycle and motorcycle-rider kinematics – Vocabulary
  • ISO 11841 Road vehicles and internal combustion engines – Filter vocabulary
    • ISO 11841-1:2000 Part 1: Definitions of filters and filter components
    • ISO 11841-2:2000 Part 2: Definitions of characteristics of filters and their components
  • ISO 11843 Capability of detection
    • ISO 11843-1:1997 Part 1: Terms and definitions
    • ISO 11843-2:2000 Part 2: Methodology in the linear calibration case
    • ISO 11843-3:2003 Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
    • ISO 11843-4:2003 Part 4: Methodology for comparing the minimum detectable value with a given value
    • ISO 11843-5:2008 Part 5: Methodology in the linear and non-linear calibration cases
    • ISO 11843-6:2013 Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
    • ISO 11843-7:2012 Part 7: Methodology based on stochastic properties of instrumental noise
  • ISO 11866 Milk and milk products – Enumeration of presumptive Escherichia coli
    • ISO 11866-1:2005 Part 1: Most probable number technique using (MUG)
    • ISO 11866-2:2005 Part 2: Colony-count technique at 44 degrees C using membranes
  • ISO 11886:2002 Building construction machinery and equipment – Pile driving and extracting equipment – Terminology and commercial specifications
  • ISO/TS 11888:2017 Nanotechnologies – Characterization of multiwall carbon nanotubes – Mesoscopic shape factors
  • ISO/IEC 11889 Information technology - Trusted platform module library
    • ISO/IEC 11889-1:2015 Part 1: Architecture
    • ISO/IEC 11889-2:2015 Part 2: Structures
    • ISO/IEC 11889-3:2015 Part 3: Commands
    • ISO/IEC 11889-4:2015 Part 4: Supporting Routines
  • ISO 11898 Road vehicles – Controller area network (CAN)
  • ISO 11904 Acoustics – Determination of sound immission from sound sources placed close to the ear
    • ISO 11904-1:2002 Part 1: Technique using a microphone in a real ear (MIRE technique)
    • ISO 11904-2:2004 Part 2: Technique using a manikin
  • ISO 11929:2010 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation - Fundamentals and application
  • ISO 11930:2012 Cosmetics – Microbiology – Evaluation of the antimicrobial protection of a cosmetic product
  • ISO/TS 11931:2012 Nanotechnologies – Nanoscale calcium carbonate in powder form – Characteristics and measurement
  • ISO/TS 11937:2012 Nanotechnologies – Nanoscale titanium dioxide in powder form – Characteristics and measurement
  • ISO 11940:1998 Information and documentation - Transliteration of Thai
    • ISO 11940-2:2007 Information and documentation - Transliteration of Thai characters into Latin characters - Part 2: Simplified transcription of Thai language
  • ISO/TR 11941:1996 Information and documentation - Transliteration of Korean script into Latin characters [Withdrawn, no replacement]
  • ISO 11957:1996 Acoustics – Determination of sound insulation performance of cabins – Laboratory and in situ measurements
  • ISO/IEC 11976:2008 Information technology - Data interchange on 130 mm rewritable and write-once-read-many ultra density optical (UDO) disk cartridges - Capacity: 60 Gbytes per cartridge - Second generation
  • ISO 11978:2017 Ophthalmic optics – Contact lenses and contact lens care products – Labelling
  • ISO 11979 Ophthalmic implants - Intraocular lenses
    • ISO 11979-1:2012 Part 1: Vocabulary
    • ISO 11979-2:2014 Part 2: Optical properties and test methods
    • ISO 11979-3:2012 Part 3: Mechanical properties and test methods
    • ISO 11979-4:2008 Part 4: Labelling and information
    • ISO 11979-5:2006 Part 5: Biocompatibility
    • ISO 11979-6:2014 Part 6: Shelf-life and transport stability testing
    • ISO 11979-7:2014 Part 7: Clinical investigations
    • ISO 11979-8:2017 Part 8: Fundamental requirements
    • ISO 11979-9:2006 Part 9: Multifocal intraocular lenses
    • ISO 11979-10:2006 Part 10: Phakic intraocular lenses
  • ISO 11980:2012 Ophthalmic optics – Contact lenses and contact lens care products – Guidance for clinical investigations
  • ISO 11981:2009 Ophthalmic optics – Contact lenses and contact lens care products – Determination of physical compatibility of contact lens care products with contact lenses
  • ISO 11986:2010 Ophthalmic optics – Contact lenses and contact lens care products – Determination of preservative uptake and release
  • ISO 11987:2012 Ophthalmic optics – Contact lenses – Determination of shelf-life
  • ISO/IEC 11989:2010 Information technology - iSCSI Management API
  • ISO 11990 Lasers and laser-related equipment – Determination of laser resistance of tracheal tubes
    • ISO 11990-1:2011 Part 1: Tracheal tube shaft
    • ISO 11990-2:2010 Part 2: Tracheal tube cuffs
  • ISO/TR 11991:1995 Guidance on airway management during laser surgery of upper airway
  • ISO 11994:1997 Cranes – Availability – Vocabulary

ISO 12000 – ISO 12999

  • ISO 12001:1996 Acoustics – Noise emitted by machinery and equipment – Rules for the drafting and presentation of a noise test code
  • ISO 12005:2003 Lasers and laser-related equipment – Test methods for laser beam parameters – Polarization
  • ISO 12006 Building construction – Organization of information about construction works
  • ISO/TS 12025:2012 Nanomaterials – Quantification of nano-object release from powders by generation of aerosols
  • ISO/IEC 12042:1993 Information technology – Data compression for information interchange – Binary arithmetic coding algorithm
  • ISO 12052:2017 Health informatics – Digital imaging and communication in medicine (DICOM) including workflow and data management
  • ISO 12083:1994 Information and documentation - Electronic manuscript preparation and markup
  • ISO 12085:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters
  • ISO/IEC 12087 Information technology - Computer graphics and image processing - Image Processing and Interchange (IPI) - Functional specification
    • ISO/IEC 12087-1:1995 Part 1: Common architecture for imaging
    • ISO/IEC 12087-2:1994 Part 2: Programmer's imaging kernel system application programme interface
    • ISO/IEC 12087-3:1995 Part 3: Image Interchange Facility (IIF)
    • ISO/IEC 12087-5:1998 Part 5: Basic Image Interchange Format (BIIF)
  • ISO/IEC 12088-4:1995 Information technology - Computer graphics and image processing - Image processing and interchange - Application program interface language bindings
  • ISO/IEC 12089:1997 Information technology - Computer graphics and image processing - Encoding for the Image Interchange Facility (IIF)
  • Safety of machinery – General principles for design – Risk assessment and risk reduction
  • ISO/IEC 12139 Information technology – Telecommunications and information exchange between systems – Powerline communication (PLC) – High speed PLC medium access control (MAC) and physical layer (PHY)
    • ISO/IEC 12139-1:2009 Part 1: General requirements
  • ISO 12165:2000 Tools for moulding - Components of compression and injection moulds and diecasting dies - Terms and symbols
  • ISO 12176 Plastics pipes and fittings – Equipment for fusion jointing polyethylene systems
    • ISO 12176-3:2011 Part 3: Operator's badge
  • ISO 12179:2000 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Calibration of contact (stylus) instruments
  • ISO 12180 Geometrical product specifications (GPS) - Cylindricity
    • ISO 12180-1:2011 Part 1: Vocabulary and parameters of cylindrical form
    • ISO 12180-2:2011 Part 2: Specification operators
  • ISO 12181 Geometrical product specifications (GPS) - Roundness
    • ISO 12181-1:2011 Part 1: Vocabulary and parameters of roundness
    • ISO 12181-2:2011 Part 2: Specification operators
  • ISO/IEC TR 12182:2015 Systems and software engineering - Framework for categorization of IT systems and software, and guide for applying it
  • ISO 12188 Tractors and machinery for agriculture and forestry – Test procedures for positioning and guidance systems in agriculture
    • ISO 12188-1:2010 Part 1: Dynamic testing of satellite-based positioning devices
    • ISO 12188-2:2012 Part 2: Testing of satellite-based auto-guidance systems during straight and level travel
  • ISO 12189:2008 Implants for surgery – Mechanical testing of implantable spinal devices – Fatigue test method for spinal implant assemblies using an anterior support
  • ISO 12199:2000 Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet
  • ISO/IEC 12207 Systems and software engineering – Software life cycle processes
  • ISO 12231:2012 Photography - Electronic still picture imaging - Vocabulary
  • ISO 12242:2012 Measurement of fluid flow in closed conduits – Ultrasonic transit-time meters for liquid
  • ISO/IEC 12246:1993 Information technology – 8 mm wide magnetic tape cartridge dual azimuth format for information interchange – Helical scan recording
  • ISO/IEC 12247:1993 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS format using 60 m and 90 m length tapes
  • ISO/IEC 12248:1993 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DATA/DAT-DC format using 60 m and 90 m length tapes
  • ISO/TR 12300:2014 Health informatics – Principles of mapping between terminological systems
  • ISO/TR 12309:2009 Health informatics – Guidelines for terminology development organizations
  • ISO/TR 12310:2015 Health informatics – Principles and guidelines for the measurement of conformance in the implementation of terminological systems
  • ISO 12353 Road vehicles – Traffic accident analysis
    • ISO 12353-1:2002 Part 1: Vocabulary
  • ISO/IEC TR 12382:1992 Permuted index of the vocabulary of information technology
  • ISO 12417 Cardiovascular implants and extracorporeal systems – Vascular device-drug combination products
    • ISO 12417-1:2015 Part 1: General requirements
  • ISO 12543 Glass in building – Laminated glass and laminated safety glass
    • ISO 12543-1:2011 Part 1: Definitions and description of component parts
  • ISO 12615:2004 Bibliographic references and source identifiers for terminology work
  • ISO 12616:2002 Translation-oriented terminography
  • ISO 12625 Tissue paper and tissue products
    • ISO 12625-1:2011 Part 1: General guidance on terms
  • ISO 12637 Graphic technology - Vocabulary
    • ISO 12637-1:2006 Part 1: Fundamental terms
    • ISO 12637-2:2008 Part 2: Prepress terms
    • ISO 12637-3:2009 Part 3: Printing terms
    • ISO 12637-4:2008 Part 4: Postpress terms
  • ISO 12639:2004 Graphic technology – Prepress digital data exchange – Tag image file format for image technology (TIFF/IT)
  • ISO 12640 Graphic technology - Prepress digital data exchange
    • ISO 12640-1:1997 Part 1: CMYK standard colour image data (CMYK/SCID)
    • ISO 12640-2:2004 Part 2: XYZ/sRGB encoded standard colour image data (XYZ/SCID)
    • ISO 12640-3:2007 Part 3: CIELAB standard colour image data (CIELAB/SCID)
    • ISO 12640-4:2011 Part 4: Wide gamut display-referred standard colour image data [Adobe RGB (1998)/SCID]
    • ISO 12640-5:2013 Part 5: Scene-referred standard colour image data (RIMM/SCID)
  • :1997 Graphic technology – Prepress digital data exchange – Colour targets for input scanner calibration
    • ISO 12641-1:2016 Part 1: Colour targets for input scanner calibration
  • ISO 12642 Graphic technology - Input data for characterization of four-colour process printing
    • ISO 12642-1:2011 Part 1: Initial data set
    • ISO 12642-2:2006 Part 2: Expanded data set
  • ISO 12651 Electronic document management - Vocabulary
    • ISO 12651-1:2012 Part 1: Electronic document imaging
    • ISO 12651-2:2014 Part 2: Workflow management
  • ISO 12671:2012 Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings
  • ISO 12706:2009 Non-destructive testing - Penetrant testing - Vocabulary
  • ISO 12707:2016 Non-destructive testing - Magnetic particle testing - Vocabulary
  • ISO 12716:2001 Non-destructive testing - Acoustic emission inspection - Vocabulary
  • ISO 12718:2008 Non-destructive testing - Eddy current testing - Vocabulary
  • ISO 12749 Nuclear energy, nuclear technologies, and radiological protection - Vocabulary
    • ISO 12749-2:2013 Part 2: Radiological protection
    • ISO 12749-3:2015 Part 3: Nuclear fuel cycle
    • ISO 12749-4:2015 Part 4: Dosimetry for radiation processing
  • ISO 12756:2016 Drawing and writing instruments - Ball point pens and roller ball pens - Vocabulary
  • ISO 12757 Ball point pens and refills
    • ISO 12757-2:1998 Part 2: Documentary use (DOC)
  • ISO 12764:2017 Measurement of fluid flow in closed conduits – Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
  • ISO/TR 12767:2007 Measurement of fluid flow by means of pressure differential devices – Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167
  • ISO/TR 12773 Business requirements for health summary records
    • ISO/TR 12773-1:2009 Part 1: Requirements
    • ISO/TR 12773-2:2009 Part 2: Environmental scan
  • ISO 12780 Geometrical product specifications (GPS) - Straightness
    • ISO 12780-1:2011 Part 1: Vocabulary and parameters of straightness
    • ISO 12780-2:2011 Part 2: Specification operators
  • ISO 12781 Geometrical product specifications (GPS) - Flatness
    • ISO 12781-1:2011 Part 1: Vocabulary and parameters of flatness
    • ISO 12781-2:2011 Part 2: Specification operators
  • ISO/IEC 12785 Information technology - Learning, education, and training - Content packaging
    • ISO/IEC 12785-1:2009 Part 1: Information model
    • ISO/IEC 12785-2:2011 Part 2: XML binding
    • ISO/IEC TR 12785-3:2012 Part 3: Best practice and implementation guide
  • ISO 12789 Reference radiation fields - Simulated workplace neutron fields
    • ISO 12789-1:2008 Part 1: Characteristics and methods of production
    • ISO 12789-2:2008 Part 2: Calibration fundamentals related to the basic quantities
  • ISO/TR 12802:2010 Nanotechnologies - Model taxonomic framework for use in developing vocabularies - Core concepts
  • :2011 Nanotechnologies – Materials specifications – Guidance on specifying nano-objects
  • ISO 12812 Core banking – Mobile financial services
    • ISO 12812-1:2017 Part 1: General framework
    • ISO/TS 12812-2:2017 Part 2: Security and data protection for mobile financial services
    • ISO/TS 12812-3:2017 Part 3: Financial application lifecycle management
    • ISO/TS 12812-4:2017 Part 4: Mobile payments-to-persons
    • ISO/TS 12812-5:2017 Part 5: Mobile payments to businesses
  • ISO 12813:2015 Electronic fee collection – Compliance check communication for autonomous systems
  • ISO 12836:2015 Dentistry - Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy
  • ISO/TR 12845:2010 Selected illustrations of fractional factorial screening experiments
  • ISO 12855:2015 Electronic fee collection – Information exchange between service provision and toll charging
  • ISO 12858 Optics and optical instruments – Ancillary devices for geodetic instruments
    • ISO 12858-1:2014 Part 1: Invar levelling staffs
    • ISO 12858-2:1999 Part 2: Tripods
    • ISO 12858-3:2005 Part 3: Tribrachs
  • ISO/TR 12859:2009 Intelligent transport systems – System architecture – Privacy aspects in ITS standards and systems
  • ISO/IEC TR 12860:2009 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – General
  • ISO/IEC TR 12861:2009 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – Identification and routing
  • ISO/IEC 12862:2011 Information technology - 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD recordable disk for dual layer (DVD-R for DL)
  • ISO 12865:2006 Ophthalmic instruments – Retinoscopes
  • ISO 12866:1999 Ophthalmic instruments – Perimeters
  • ISO 12867:2010 Ophthalmic instruments – Trial frames
  • ISO/TS 12869:2012 Water quality – Detection and quantification of Legionella spp. and/or Legionella pneumophila by concentration and genic amplification by quantitative polymerase chain reaction (qPCR)
  • ISO 12870:2016 Ophthalmic optics – Spectacle frames – Requirements and test methods
  • ISO/TR 12885:2008 Nanotechnologies – Health and safety practices in occupational settings relevant to nanotechnologies
  • ISO/TR 12888:2011 Selected illustrations of gauge repeatability and reproducibility studies
  • ISO 12891 Retrieval and analysis of surgical implants
    • ISO 12891-1:2015 Part 1: Retrieval and handling
    • ISO 12891-2:2014 Part 2: Analysis of retrieved surgical implants
  • ISO/TS 12901 Nanotechnologies – Occupational risk management applied to engineered nanomaterials
    • ISO/TS 12901-1:2012 Part 1: Principles and approaches
    • ISO/TS 12901-2:2014 Part 2: Use of the control banding approach
  • ISO/IEC 12905:2011 Integrated circuit cards – Enhanced terminal accessibility using cardholder preference interface
  • ISO 12912:2014 Circular knitting machines – Vocabulary
  • ISO 12913 Acoustics – Soundscape
    • ISO 12913-1:2014 Part 1: Definition and conceptual framework
  • ISO 12931:2012 Performance criteria for authentication solutions used to combat counterfeiting of material goods
  • ISO 12944 Paints and varnishes – Corrosion protection of steel structures by protective paint systems
  • ISO 12967 Health informatics – Service architecture
    • ISO 12967-1:2009 Part 1: Enterprise viewpoint
    • ISO 12967-2:2009 Part 2: Information viewpoint
    • ISO 12967-3:2009 Part 3: Computational viewpoint
  • ISO 12999 Acoustics – Determination and application of measurement uncertainties in building acoustics
    • ISO 12999-1:2014 Part 1: Sound insulation

ISO 13000 – ISO 13999

  • ISO 13006:2012 Ceramic tiles – Definitions, classification, characteristics and marking
  • ISO 13007 Ceramic tiles – Grouts and adhesives
    • ISO 13007-1:2014 Terms, definitions and specifications for adhesives
    • ISO 13007-2:2010 Test methods for adhesives
    • ISO 13007-3:2010 Terms, definitions and specifications for grouts
    • ISO 13007-4:2013 Test methods for grouts
  • ISO 13008:2012 Information and documentation - Digital records conversion and migration process
  • ISO 13009:2015 Tourism and related services – Requirements and recommendations for beach operation
  • ISO/TR 13014:2012 Nanotechnologies – Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment
  • ISO/TR 13028:2010 Information and documentation - Implementation guidelines for digitization of records
  • ISO 13053 Quantitative methods in process improvement - Six Sigma
    • ISO 13053-1:2011 Part 1: DMAIC methodology
    • ISO 13053-2:2011 Part 2: Tools and techniques
  • ISO/TR 13054:2012 Knowledge management of health information standards
  • ISO/TR 13062:2015 Electric mopeds and motorcycles – Terminology and classification
  • ISO/IEC 13066 Information technology - Interoperability with assistive technology (AT)
    • ISO/IEC 13066-1:2011 Part 1: Requirements and recommendations for interoperability
    • ISO/IEC TR 13066-2:2016 Part 2: Windows accessibility application programming interface (API)
    • ISO/IEC TR 13066-3:2012 Part 3: IAccessible2 accessibility application programming interface (API)
    • ISO/IEC TR 13066-4:2015 Part 4: Linux/UNIX graphical environments accessibility API
    • ISO/IEC TR 13066-6:2014 Part 6: Java accessibility application programming interface (API)
  • ISO 13078 Dentistry - Dental furnace
    • ISO 13078-2:2016 Part 2: Test method for evaluation of furnace programme via firing glaze
  • ISO 13102:2012 Geometrical product specifications (GPS) – Dimensional measuring equipment: Electronic digital-indicator gauge – Design and metrological characteristics
  • ISO 13105 Building construction machinery and equipment – Machinery for concrete surface floating and finishing
    • ISO 13105-1:2014 Part 1: Terms and commercial specifications
  • ISO 13111 Intelligent transport systems (ITS) – The use of personal ITS station to support ITS service provision for travellers
    • ISO 13111-1:2017 Part 1: General information and use case definitions
  • ISO 13119:2012 Health informatics – Clinical knowledge resources – Metadata
  • ISO 13120:2013 Health informatics – Syntax to represent the content of healthcare classification systems – Classification Markup Language (ClaML)
  • :2011 Nanotechnologies – Nanomaterial risk evaluation
  • ISO 13127:2012 Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems
  • ISO/TR 13128:2012 Health Informatics – Clinical document registry federation
  • ISO/TS 13131:2014 Health informatics – Telehealth services – Quality planning guidelines
  • ISO/TS 13136:2012 Microbiology of food and animal feed – Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens – Horizontal method for the detection of Shiga toxin-producing Escherichia coli (STEC) and the determination of O157, O111, O26, O103 and O145 serogroups
  • ISO 13140 Electronic fee collection – Evaluation of on-board and roadside equipment for conformity to ISO 13141
    • ISO 13140-1:2016 Part 1: Test suite structure and test purposes
    • ISO 13140-2:2016 Part 2: Abstract test suite
  • ISO 13141:2015 Electronic fee collection – Localisation augmentation communication for autonomous systems
  • ISO 13142:2015 Electro-optical systems – Cavity ring-down technique for high-reflectance measurement
  • ISO 13143 Electronic fee collection – Evaluation of on-board and roadside equipment for conformity to ISO 12813
    • ISO 13143-1:2016 Part 1: Test suite structure and test purposes
    • ISO 13143-2:2016 Part 2: Abstract test suite
  • ISO/TR 13154:2017 Medical electrical equipment – Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph
  • ISO/IEC 13156:2011 Information technology – Telecommunications and information exchange between systems – High rate 60 GHz PHY, MAC and PALs
  • ISO/IEC 13157 Information technology – Telecommunications and information exchange between systems – NFC Security
    • ISO/IEC 13157-1:2014 Part 1: NFC-SEC NFCIP-1 security services and protocol
    • ISO/IEC 13157-2:2016 Part 2: NFC-SEC cryptography standard using ECDH and AES
    • ISO/IEC 13157-3:2016 Part 3: NFC-SEC cryptography standard using ECDH-256 and AES-GCM
    • ISO/IEC 13157-4:2016 Part 4: NFC-SEC entity authentication and key agreement using asymmetric cryptography
    • ISO/IEC 13157-5:2016 Part 5: NFC-SEC entity authentication and key agreement using symmetric cryptography
  • ISO 13160:2012 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting
  • ISO 13161:2011 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry
  • ISO 13162:2011 Water quality - Determination of carbon 14 activity - Liquid scintillation counting method
  • ISO 13163:2013 Water quality - Lead-210 - Test method using liquid scintillation counting
  • ISO 13164 Water quality - Radon-222
    • ISO 13164-1:2013 Part 1: General principles
    • ISO 13164-2:2013 Part 2: Test method using gamma-ray spectrometry
    • ISO 13164-3:2013 Part 3: Test method using emanometry
    • ISO 13164-4:2015 Part 4: Test method using two-phase liquid scintillation counting
  • ISO 13165 Water quality - Radium-226
    • ISO 13165-1:2013 Part 1: Test method using liquid scintillation counting
    • ISO 13165-2:2014 Part 2: Test method using emanometry
    • ISO 13165-3:2016 Part 3: Test method using coprecipitation and gamma-spectrometry
  • ISO 13167:2015 Water quality - Plutonium, americium, curium and neptunium - Test method using alpha spectrometry
  • ISO/IEC 13170:2009 Information technology - 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD re-recordable disk for dual layer (DVD-RW for DL)
  • ISO 13175 Implants for surgery – Calcium phosphates
    • ISO 13175-3:2012 Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes
  • ISO 13179 Implants for surgery – Plasma-sprayed unalloyed titanium coatings on metallic surgical implants
    • ISO 13179-1:2014 Part 1: General requirements
  • ISO 13183:2012 Intelligent transport systems – Communications access for land mobiles (CALM) – Using broadcast communications
  • ISO 13184 Intelligent transport systems (ITS) – Guidance protocol via personal ITS station for advisory safety systems
    • ISO/TR 13184-1:2013 Part 1: General information and use case definitions
    • ISO 13184-2:2016 Part 2: Road guidance protocol (RGP) requirements and specification
  • ISO 13185 Intelligent transport systems – Vehicle interface for provisioning and support of ITS services
    • ISO/TR 13185-1:2012 Part 1: General information and use case definition
    • ISO 13185-2:2015 Part 2: Unified gateway protocol (UGP) requirements and specification for vehicle ITS station gateway (V-ITS-SG) interface
  • ISO/IEC 13187:2011 Information technology - Server management command line protocol (SM CLP) specification
  • ISO/TR 13195:2015 Selected illustrations of response surface method - Central composite design
  • ISO 13200:1995 Cranes - Safety signs and hazard pictorials - General principles
  • ISO 13203:2005 Chains, sprockets and accessories - List of equivalent terms
  • ISO/IEC 13210:1999 Information technology - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformance to POSIX Standards
  • ISO/IEC 13211 Information technology - Programming languages - Prolog
  • ISO 13212:2014 Ophthalmic optics – Contact lens care products – Guidelines for determination of shelf-life
  • ISO/IEC 13213:1994 Information technology - Microprocessor systems - Control and Status Registers (CSR) Architecture for microcomputer buses
  • ISO 13225:2012 Geometrical product specifications (GPS) – Dimensional measuring equipment; Height gauges – Design and metrological characteristics
  • ISO/IEC TR 13233:1995 Information technology - Interpretation of accreditation requirements in ISO/IEC Guide 25 - Accreditation of Information Technology and Telecommunications testing laboratories for software and protocol testing services
  • ISO/IEC 13235 Information technology - Open Distributed Processing - Trading function
    • ISO/IEC 13235-1:1998 Specification
    • ISO/IEC 13235-3:1998 Part 3: Provision of Trading Function using OSI Directory service
  • ISO/IEC 13236:1998 Information technology - Quality of service: Framework
  • ISO/IEC 13238 Information technology – Data Management
    • ISO/IEC 13238-3:1998 Part 3: IRDS export/import facility
  • ISO/IEC 13239:2002 Information technology – Telecommunications and information exchange between systems – High-level data link control (HDLC) procedures
  • ISO/IEC 13240:2001 Information technology - Document description and processing languages - Interchange Standard for Multimedia Interactive Documents (ISMID)
  • ISO/IEC 13241:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Route Restriction Class additional network feature
  • ISO/IEC 13242:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Route Restriction Class additional network feature
  • ISO/IEC 13244:1998 Information technology - Open Distributed Management Architecture
  • ISO/IEC 13246:1997 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Signalling ATM adaptation layer
  • ISO/IEC 13247:1997 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Basic call/connection control
  • Information technology – Database languages – SQL multimedia and application
    • ISO/IEC 13249-1:2016 Part 1: Framework
    • ISO/IEC 13249-2:2003 Part 2: Full-Text
    • ISO/IEC 13249-3:2016 Part 3: Spatial
    • ISO/IEC 13249-5:2003 Part 5: Still image
    • ISO/IEC 13249-6:2006 Part 6: Data mining
    • ISO/IEC TS 13249-7:2013 Part 7: History
  • ISO/IEC 13250 Information technology – Topic Maps[Note 3]
  • ISO/IEC 13251:2004 Collection of graphical symbols for office equipment
  • ISO/IEC 13252:1999 Information technology – Enhanced communications transport service definition
  • ISO 13261 Sound power rating of air-conditioning and air-source heat pump equipment
    • ISO 13261-1:1998 Part 1: Non-ducted outdoor equipment
    • ISO 13261-2:1998 Part 2: Non-ducted indoor equipment
  • ISO 13274:2013 Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs
  • ISO/TS 13278:2011 Nanotechnologies – Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
  • ISO 13289:2011 Recreational diving services – Requirements for the conduct of snorkelling excursions
  • ISO 13293:2012 Recreational diving services – Requirements for gas blender training programmes
  • ISO 13300 Sensory analysis – General guidance for the staff of a sensory evaluation laboratory
    • ISO 13300-1:2006 Part 1: Staff responsibilities
    • ISO 13300-2:2006 Part 2: Recruitment and training of panel leaders
  • ISO 13304 Radiological protection - Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation
    • ISO 13304-1:2013 Part 1: General principles
  • ISO 13307:2013 Microbiology of food and animal feed – Primary production stage – Sampling techniques
  • Particle size analysis - Laser diffraction methods
  • ISO 13325:2003 Tyres – Coast-by methods for measurement of tyre-to-road sound emission
  • ISO/TR 13329:2012 Nanomaterials – Preparation of material safety data sheet (MSDS)
  • ISO 13332:2000 Reciprocating internal combustion engines – Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
  • ISO/IEC 13346 Information technology – Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange
    • ISO/IEC 13346-1:1995 Part 1: General
    • ISO/IEC 13346-2:1999 Part 2: Volume and boot block recognition
    • ISO/IEC 13346-3:1999 Part 3: Volume structure
    • ISO/IEC 13346-4:1999 Part 4: File structure
    • ISO/IEC 13346-5:1995 Part 5: Record structure
  • ISO 13347 Industrial fans – Determination of fan sound power levels under standardized laboratory conditions
    • ISO 13347-1:2004 Part 1: General overview
    • ISO 13347-2:2004 Part 2: Reverberant room method
    • ISO 13347-3:2004 Part 3: Enveloping surface methods
    • ISO 13347-4:2004 Part 4: Sound intensity method
  • ISO 13349:2010 Fans - Vocabulary and definitions of categories
  • ISO 13356:2015 Implants for surgery – Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)
  • Thermal performance of buildings – Heat transfer via the ground – Calculation methods
  • ISO 13372:2012 Condition monitoring and diagnostics of machines - Vocabulary
  • ISO 13373 Condition monitoring and diagnostics of machines – Vibration condition monitoring
    • ISO 13373-1:2002 Part 1: General procedures
    • ISO 13373-2:2016 Part 2: Processing, analysis and presentation of vibration data
    • ISO 13373-3:2015 Part 3: Guidelines for vibration diagnosis
    • ISO 13373-7:2017 Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants
    • ISO 13373-9:2017 Part 9: Diagnostic techniques for electric motors
  • ISO 13374 Condition monitoring and diagnostics of machine systems – Data processing, communication and presentation[Note 3]
    • ISO 13374-1:2003 Part 1: General guidelines
    • ISO 13374-2:2007 Part 2: Data processing
    • ISO 13374-3:2012 Part 3: Communication
    • ISO 13374-4:2015 Part 4: Presentation
  • ISO 13379 Condition monitoring and diagnostics of machines – Data interpretation and diagnostics techniques
    • ISO 13379-1:2012 Part 1: General guidelines
    • ISO 13379-2:2015 Part 2: Data-driven applications
  • ISO 13381 Condition monitoring and diagnostics of machines – Prognostics
    • ISO 13381-1:2015 Part 1: General guidelines
  • ISO 13385 Geometrical product specifications (GPS) – Dimensional measuring equipment
    • ISO 13385-1:2011 Part 1: Callipers; Design and metrological characteristics
    • ISO 13385-2:2011 Part 2: Calliper depth gauges; Design and metrological characteristics
  • ISO 13399 Cutting tool data representation and exchange
    • ISO 13399-1:2006 Part 1: Overview, fundamental principles and general information model
    • ISO/TS 13399-2:2014 Part 2: Reference dictionary for the cutting items
    • ISO/TS 13399-3:2014 Part 3: Reference dictionary for tool items
    • ISO/TS 13399-4:2014 Part 4: Reference dictionary for adaptive items
    • ISO/TS 13399-5:2014 Part 5: Reference dictionary for assembly items
    • ISO/TS 13399-50:2013 Part 50: Reference dictionary for reference systems and common concepts
    • ISO/TS 13399-60:2014 Part 60: Reference dictionary for connection systems
    • ISO/TS 13399-70:2016 Part 70: Graphical data layout - Layer setting for tool layout
    • ISO/TS 13399-71:2016 Part 71: Graphical data layout - Creation of documents for standardized data exchange: Graphical product information
    • ISO/TS 13399-72:2016 Part 72: Creation of documents for the standardized data exchange - Definition of properties for drawing header and their XML-data exchange
    • ISO/TS 13399-80:2017 Part 80: Creation and exchange of 3D models - Overview and principles
    • ISO/TS 13399-100:2008 Part 100: Definitions, principles and methods for reference dictionaries
    • ISO/TS 13399-150:2008 Part 150: Usage guidelines
    • ISO/TS 13399-201:2014 Part 201: Creation and exchange of 3D models - Regular inserts
    • ISO/TS 13399-202:2015 Part 202: Creation and exchange of 3D models - Irregular inserts
    • ISO/TS 13399-203:2015 Part 203: Creation and exchange of 3D models - Replaceable inserts for drilling
    • ISO/TS 13399-204:2016 Part 204: Creation and exchange of 3D models - Inserts for reaming
    • ISO/TS 13399-301:2013 Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies
    • ISO/TS 13399-302:2013 Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools
    • ISO/TS 13399-303:2016 Part 303: Creation and exchange of 3D models - Solid end mills
    • ISO/TS 13399-304:2016 Part 304: Creation and exchange of 3D models - Solid milling cutters with arbor hole
    • ISO/TS 13399-305:2017 Part 305: Creation and exchange of 3D models - Modular tooling systems with adjustable cartridges for boring
    • ISO/TS 13399-307:2016 Part 307: Creation and exchange of 3D models - End mills for indexable inserts
    • ISO/TS 13399-308:2016 Part 308: Creation and exchange of 3D models - Milling cutters with arbor hole for indexable inserts
    • ISO/TS 13399-309:2016 Part 309: Creation and exchange of 3D models - Tool holders for indexable inserts
    • ISO/TS 13399-310:2017 Part 310: Creation and exchange of 3D models - Turning tools with carbide tips
    • ISO/TS 13399-311:2016 Part 311: Creation and exchange of 3D models - Solid reamers
    • ISO/TS 13399-312:2016 Part 312: Creation and exchange of 3D models - Reamers for indexable inserts
    • ISO/TS 13399-401:2016 Part 401: Creation and exchange of 3D models - Converting, extending and reducing adaptive items
    • ISO/TS 13399-405:2016 Part 405: Creation and exchange of 3D models - Collets
  • ISO 13402:1995 Surgical and dental hand instruments – Determination of resistance against autoclaving, corrosion and thermal exposure
  • ISO/IEC 13403:1995 Information technology - Information interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the CCS method
  • ISO 13404:2007 Prosthetics and orthotics – Categorization and description of external orthoses and orthotic components
  • ISO 13405 Prosthetics and orthotics – Classification and description of prosthetic components
    • ISO 13405-1:2015 Part 1: Classification of prosthetic components
    • ISO 13405-2:2015 Part 2: Description of lower limb prosthetic components
    • ISO 13405-3:2015 Part 3: Description of upper limb prosthetic components
  • ISO 13406 Ergonomic requirements for work with visual displays based on flat panels
    • ISO 13406-2:2001 Part 2: Ergonomic requirements for flat panel displays [withdrawn 2008-11-14]
  • ISO/IEC 13421:1993 Information technology – Data Interchange on 12,7 mm, 48-track magnetic tape cartridges – DLT 1 format
  • ISO/IEC 13422:1994 Information technology – Data interchange on 90 mm Flexible Disk Cartridges 10 MByte capacity using sector servo tracking – ISO Type 304
  • ISO 13444:2012 Technical product documentation (TPD) – Dimensioning and indication of knurling
  • ISO 13448 Acceptance sampling procedures based on the allocation of priorities principle (APP)
    • ISO 13448-1:2005 Part 1: Guidelines for the APP approach
    • ISO 13448-2:2004 Part 2: Coordinated single sampling plans for acceptance sampling by attributes
  • ISO 13450 Photography – 110-size cartridge, film and backing paper – Dimensions
  • ISO/TS 13471 Acoustics – Temperature influence on tyre/road noise measurement
    • ISO/TS 13471-1:2017 Part 1: Correction for temperature when testing with the CPX method
  • ISO 13472 Acoustics – Measurement of sound absorption properties of road surfaces in situ
    • ISO 13472-1:2002 Part 1: Extended surface method
    • ISO 13472-2:2010 Part 2: Spot method for reflective surfaces
  • ISO 13473 Characterization of pavement texture by use of surface profiles
    • ISO 13473-1:1997 Part 1: Determination of Mean Profile Depth
    • ISO 13473-2:2002 Part 2: Terminology and basic requirements related to pavement texture profile analysis
    • ISO 13473-3:2002 Part 3: Specification and classification of profilometers
    • ISO/TS 13473-4:2008 Part 4: Spectral analysis of surface profiles
    • ISO 13473-5:2009 Part 5: Determination of megatexture
  • ISO 13474:2009 Acoustics – Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment
  • ISO 13475 Acoustics – Stationary audible warning devices used outdoors
    • ISO 13475-1:1999 Part 1: Field measurements for determination of sound emission quantities
    • ISO/TS 13475-2:2000 Part 2: Precision methods for determination of sound emission quantities
  • ISO/IEC 13481:1993 Information technology - Data interchange on 130 mm optical disk cartridges - Capacity: 1 gigabyte per cartridge
  • ISO 13482:2014 Robots and robotic devices – Safety requirements for personal care robots
  • ISO 13485:2016 Medical devices – Quality management systems – Requirements for regulatory purposes
  • ISO/IEC 13490 Information technology – Volume and file structure of read-only and write-once compact disk media for information interchange
    • ISO/IEC 13490-1:1995 Part 1: General
    • ISO/IEC 13490-2:1995 Part 2: Volume and file structure
  • ISO 13491 Financial services – Secure cryptographic devices (retail)
    • ISO 13491-1:2016 Part 1: Concepts, requirements and evaluation methods
    • ISO 13491-2:2017 Part 2: Security compliance checklists for devices used in financial transactions
  • ISO 13492:2007 Financial services – Key management related data element – Application and usage of ISO 8583 data elements 53 and 96
  • ISO/TR 13519:2012 Guidance on the development and use of ISO statistical publications supported by software
  • ISO/IEC 13522 Information technology - Coding of multimedia and hypermedia information
    • ISO/IEC 13522-1:1997 Part 1: MHEG object representation - Base notation (ASN.1)
    • ISO/IEC 13522-3:1997 Part 3: MHEG script interchange representation
    • ISO/IEC 13522-4:1996 Part 4: MHEG registration procedure
    • ISO/IEC 13522-5:1997 Part 5: Support for base-level interactive applications
    • ISO/IEC 13522-6:1998 Part 6: Support for enhanced interactive applications
    • ISO/IEC 13522-7:2001 Part 7: Interoperability and conformance testing for ISO/IEC 13522-5
    • ISO/IEC 13522-8:2001 Part 8: XML notation for ISO/IEC 13522-5
  • ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
  • ISO 13539:1998 Earth-moving machinery – Trenchers – Definitions and commercial specifications
  • ISO/IEC 13549:1993 Information technology - Data interchange on 130 mm optical disk cartridges - Capacity: 1,3 gigabytes per cartridge
  • ISO 13550:2002 Hydrometric determinations – Flow measurements in open channels using structures – Use of vertical underflow gates and radial gates
  • ISO 13559:2002 Butter, fermented milks and fresh cheese – Enumeration of contaminating microorganisms – Colony-count technique at 30 degrees C
  • ISO/IEC 13560:2009 Information technology – Telecommunications and information exchange between systems – Procedure for the registration of assigned numbers for ISO/IEC 26907 and ISO/IEC 26908
  • ISO/IEC TR 13561:1994 Information technology - Guidelines for effective use of optical disk cartridges conforming to ISO/IEC 10090
  • ISO 13565 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties
    • ISO 13565-1:1996 Part 1: Filtering and general measurement conditions
    • ISO 13565-2:1996 Part 2: Height characterization using the linear material ratio curve
    • ISO 13565-3:1998 Part 3: Height characterization using the material probability curve
  • ISO 13567 Technical product documentation – Organization and naming of layers for CAD
  • ISO/IEC 13568:2002 Information Technology – Z formal specification notation – Syntax, type system and semantics
  • ISO/TR 13569:2005 Financial services – Information security guidelines
  • ISO 13574:2015 Industrial furnaces and associated processing equipment - Vocabulary
  • ISO/IEC 13575:1995 Information technology – Telecommunications and information exchange between systems – 50-pole interface connector mateability dimensions and contact number assignments
  • ISO 13577 Industrial furnaces and associated processing equipment - Safety
    • ISO 13577-1:2016 Part 1: General requirements
    • ISO 13577-2:2014 Part 2: Combustion and fuel handling systems
    • ISO 13577-3:2016 Part 3: Generation and use of protective and reactive atmosphere gases
    • ISO 13577-4:2014 Part 4: Protective systems
  • ISO 13579 Industrial furnaces and associated processing equipment - Method of measuring energy balance and calculating efficiency
    • ISO 13579-1:2013 General methodology
    • ISO 13579-2:2013 Reheating furnaces for steel
    • ISO 13579-3:2013 Batch-type aluminium melting furnaces
    • ISO 13579-4:2013 Furnaces with protective or reactive atmosphere
  • ISO/TS 13582:2015 Health informatics – Sharing of OID registry information
  • ISO 13586:2000 Plastics - Determination of fracture toughness (GIC and KIC) – Linear elastic fracture mechanics (LEFM) approach
  • ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
  • ISO/IEC TR 13594:1995 Information technology – Lower layers security
  • ISO 13606 Health informatics – Electronic health record communication
    • ISO 13606-1:2008 Part 1: Reference model
    • ISO 13606-2:2008 Part 2: Archetype interchange specification
    • ISO 13606-3:2009 Part 3: Reference archetypes and term lists
    • ISO/TS 13606-4:2009 Part 4: Security
    • ISO 13606-5:2010 Part 5: Interface specification
  • ISO 13611:2014 Interpreting - Guidelines for community interpreting
  • ISO/IEC 13614:1995 Information technology - Interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the SSF method
  • ISO 13616 Financial services – International bank account number (IBAN)
  • Petroleum and natural gas industries – Design and operation of subsea production systems
    • ISO 13628-1:2005 Part 1: General requirements and recommendations
    • ISO 13628-2:2006 Part 2: Unbonded flexible pipe systems for subsea and marine applications
    • ISO 13628-3:2000 Part 3: Through flowline (TFL) systems
    • ISO 13628-4:2010 Part 4: Subsea wellhead and tree equipment
    • ISO 13628-5:2009 Part 5: Subsea umbilicals
    • ISO 13628-6:2006 Part 6: Subsea production control systems
    • ISO 13628-7:2005 Part 7: Completion/workover riser systems
    • ISO 13628-8:2002 Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems
    • ISO 13628-9:2000 Part 9: Remotely Operated Tool (ROT) intervention systems
    • ISO 13628-10:2005 Part 10: Specification for bonded flexible pipe
    • ISO 13628-11:2007 Part 11: Flexible pipe systems for subsea and marine applications
    • ISO 13628-15:2011 Part 15: Subsea structures and manifolds
  • ISO/IEC 13642:1999 Information technology – Elements of management information related to the OSI Physical Layer
  • ISO 13653:1996 Optics and optical instruments - General optical test methods - Measurement of relative irradiance in the image field
  • ISO 13666:2012 Ophthalmic optics - Spectacle lenses - Vocabulary
  • ISO/IEC 13673:2000 Information technology - Document processing and related communication - Conformance testing for Standard Generalized Markup Language (SGML) systems
  • ISO 13687 Tourism and related services – Yacht harbours
    • ISO 13687-1:2017 Part 1: Minimum requirements for basic service level harbours
    • ISO 13687-2:2017 Part 2: Minimum requirements for intermediate service level harbours
    • ISO 13687-3:2017 Part 3: Minimum requirements for high service level harbours
  • ISO 13694:2015 Optics and photonics – Lasers and laser-related equipment – Test methods for laser beam power (energy) density distribution
  • ISO 13695:2004 Optics and photonics – Lasers and laser-related equipment – Test methods for the spectral characteristics of lasers
  • ISO 13696:2002 Optics and optical instruments – Test methods for radiation scattered by optical components
  • ISO 13697:2006 Optics and photonics – Lasers and laser-related equipment – Test methods for specular reflectance and regular transmittance of optical laser components
  • ISO 13702 Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines
  • ISO/IEC 13712 Information technology – Remote Operations
    • ISO/IEC 13712-1:1995 Concepts, model and notation
    • ISO/IEC 13712-2:1995 OSI realizations – Remote Operations Service Element (ROSE) service definition
    • ISO/IEC 13712-3:1995 OSI realizations – Remote Operations Service Element (ROSE) protocol specification
  • ISO/IEC 13714:1995 Information technology – Document processing and related communication – User interface to telephone-based services – Voice messaging applications
  • :2017 Technical product documentation—Edges of undefined shape—Indication and dimensioning
  • ISO/IEC 13719 Information technology - Portable Common Tool Environment (PCTE)
    • ISO/IEC 13719-1:1998 Part 1: Abstract specification
    • ISO/IEC 13719-2:1998 Part 2: C programming language binding
    • ISO/IEC 13719-3:1998 Part 3: Part 3: Ada programming language binding
    • ISO/IEC 13719-4:1998 Part 4: IDL binding (Interface Definition Language)
  • ISO 13720:2010 Meat and meat products – Enumeration of presumptive Pseudomonas spp.
  • ISO 13722:2017 Microbiology of the food chain – Enumeration of spp. – Colony-count technique
  • ISO 13731:2001 Ergonomics of the thermal environment - Vocabulary and symbols
  • ISO/IEC 13751:2001 Information technology - Programming languages, their environments and system software interfaces - Programming language Extended APL
  • ISO 13766:2006 Earth-moving machinery – Electromagnetic compatibility
  • ISO 13779 Implants for surgery – Hydroxyapatite
    • ISO 13779-2:2008 Part 2: Coatings of hydroxyapatite
    • ISO 13779-3:2008 Part 3: Chemical analysis and characterization of crystallinity and phase purity
    • ISO 13779-4:2002 Part 4: Determination of coating adhesion strength
    • ISO 13779-6:2015 Part 6: Powders
  • ISO 13781:2017 Implants for surgery – Homopolymers, copolymers and blends on poly(lactide) – In vitro degradation testing
  • ISO 13782:1996 Implants for surgery – Metallic materials – Unalloyed tantalum for surgical implant applications
  • ISO/IEC 13800:1996 Information technology - Procedure for the registration of identifiers and attributes for volume and file structure
  • ISO 13810:2015 Tourism services – Industrial tourism – Service provision
  • ISO/TS 13811:2015 Tourism and related services – Guidelines on developing environmental specifications for accommodation establishments
  • ISO/IEC 13816:2007 Information technology - Programming languages, their environments and system software interfaces - Programming language ISLISP
  • ISO/IEC 13817 Information technology - Programming languages, their environments and system software interfaces - Vienna Development Method - Specification Language
    • ISO/IEC 13817-1:1996 Part 1: Base language
  • ISO/IEC 13818 Information technology – Generic coding of moving pictures and associated audio information
  • ISO/TS 13830:2013 Nanotechnologies – Guidance on voluntary labelling for consumer products containing manufactured nano-objects
  • Road vehicles – Safety glazing materials – Method for the determination of solar transmittance
  • ISO/IEC TR 13841:1995 Information technology - Guidance on measurement techniques for 90 mm optical disk cartridges
  • ISO/IEC 13842:1995 Information technology - 130 mm optical disk cartridges for information interchange - Capacity: 2 Gbytes per cartridge
  • ISO 13843:2017 Water quality – Requirements for establishing performance characteristics of quantitative microbiological methods
  • ISO 13849 Safety of machinery – Safety related parts of control systems
  • ISO 13860:2016 Machinery for forestry – Forwarders – Terms, definitions and commercial specifications
  • ISO 13861:2000 Machinery for forestry – Wheeled skidders – Terms, definitions and commercial specifications
  • ISO 13862:2000 Machinery for forestry – Feller-bunchers – Terms, definitions and commercial specifications
  • ISO/IEC 13863:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Path replacement additional network feature
  • ISO/IEC 13864:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Name identification supplementary services
  • ISO/IEC 13865:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Transfer supplementary service
  • ISO/IEC 13866:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call completion supplementary services
  • ISO/IEC 13868:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Name identification supplementary services
  • ISO/IEC 13869:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Transfer supplementary service
  • ISO/IEC 13870:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Completion supplementary services
  • ISO/IEC 13871:1995 Information technology – Telecommunications and information exchange between systems – Private telecommunications networks – Digital channel aggregation
  • ISO/IEC 13872:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Diversion supplementary services
  • ISO/IEC 13873:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Diversion supplementary services
  • ISO/IEC 13874:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Path Replacement additional network feature
  • ISO/IEC 13886:1996 Information technology - Language-Independent Procedure Calling (LIPC)
  • ISO/IEC 13888 Information technology - Security techniques - Non-repudiation
    • ISO/IEC 13888-1:2009 Part 1: General
    • ISO/IEC 13888-2:2010 Part 2: Mechanisms using symmetric
    • ISO/IEC 13888-3:2009 Part 3: Mechanisms using asymmetric techniques
  • ISO 13920:1996 Welding – General tolerances for welded constructions – Dimensions for lengths and angles – Shape and position
  • ISO/IEC 13923:1996 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-2 format using 120 m length tape
  • ISO 13926 Pen systems
    • ISO 13926-1:2004 Part 1: Glass cylinders for pen-injectors for medical use
    • ISO 13926-2:2011 Part 2: Plunger stoppers for pen-injectors for medical use
    • ISO 13926-3:2012 Part 3: Seals for pen-injectors for medical use
  • ISO 13940:2015 Health informatics – System of concepts to support continuity of care
  • ISO 13943:2017 Fire safety - Vocabulary
  • ISO 13958:2014 Concentrates for haemodialysis and related therapies
  • ISO 13959:2014 Water for haemodialysis and related therapies
  • ISO 13960:2010 Cardiovascular implants and extracorporeal systems – Plasmafilters
  • ISO/IEC 13961:2000 Information technology - Scalable Coherent Interface (SCI)
  • ISO/IEC 13962:1995 Information technology – Data interchange on 12,7 mm, 112-track magnetic tape cartridges – DLT 2 format
  • ISO/IEC 13963:1995 Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 230 megabytes per cartridge
  • ISO 13969:2003 Milk and milk products – Guidelines for a standardized description of microbial inhibitor tests
  • ISO 13970:2011 Recreational diving services – Requirements for the training of recreational snorkelling guides
  • ISO/TS 13972:2015 Health informatics – Detailed clinical models, characteristics and processes
  • ISO/TR 13973:2014 Artificial recharge to groundwater
  • ISO 13990 Textile machinery and accessories – Yarn feeders and yarn control for knitting machines
    • ISO 13990-1:2006 Part 1: Vocabulary

ISO 14000 – ISO 14999

  • ISO 14000 Environmental management systems [This is a set of standards, rather than a single standard.]
  • ISO 14001:2015 Environmental management systems – Requirements with guidance for use
  • :2016 Environmental management systems – General guidelines on implementation
  • ISO 14005:2010 Environmental management systems – Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation
  • ISO 14006:2011 Environmental management systems – Guidelines for incorporating ecodesign
  • ISO 14031 Environmental management - Environmental performance evaluation – Guidelines
  • :2009 Environmental management – Vocabulary
  • ISO 14051 Environmental management – Material flow cost accounting - General framework
  • ISO 14064 Greenhouse gases
  • ISO/TR 14073:2017 Environmental management - Water footprint - Illustrative examples on how to apply ISO 14046
  • ISO 14084 Process diagrams for power plants
    • ISO 14084-1:2015 Part 1: Specification for diagrams
    • ISO 14084-2:2015 Part 2: Graphical symbols
  • ISO/TS 14101:2012 Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method
  • ISO/IEC 14102:2008 Information technology - Guideline for the evaluation and selection of CASE tools
  • ISO/TR 14105:2011 Document management - Change management for successful electronic document management system (EDMS) implementation
  • ISO 14117:2012 Active implantable medical devices – Electromagnetic compatibility – EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
  • ISO 14132 Optics and photonics - Vocabulary for telescopic systems
    • ISO 14132-1:2015 Part 1: General terms and alphabetical indexes of terms in ISO 14132
    • ISO 14132-2:2015 Part 2: Terms for binoculars, monoculars and spotting scopes
    • ISO 14132-3:2014 Part 3: Terms for telescopic sights
    • ISO 14132-4:2015 Part 4: Terms for astronomical telescopes
    • ISO 14132-5:2008 Part 5: Terms for night vision devices
  • ISO/IEC 14136:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Identification supplementary services
  • ISO 14139:2000 Hydrometric determinations – Flow measurements in open channels using structures – Compound gauging structures
  • ISO/IEC 14143 Information technology - Software measurement - Functional size measurement
    • ISO/IEC 14143-1:2007 Part 1: Definition of concepts
    • ISO/IEC 14143-2:2011 Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1
    • ISO/IEC TR 14143-3:2003 Part 3: Verification of functional size measurement methods
    • ISO/IEC TR 14143-4:2002 Part 4: Reference model
    • ISO/IEC TR 14143-5:2004 Part 5: Determination of functional domains for use with functional size measurement
    • ISO/IEC 14143-6:2012 Part 6: Guide for use of ISO/IEC 14143 series and related International Standards
  • ISO 14145 Roller ball pens and refills
    • ISO 14145-2:1998 Part 2: Documentary use (DOC)
  • ISO 14155:2011 Clinical investigation of medical devices for human subjects – Good clinical practice
  • ISO 14163:1998 Acoustics – Guidelines for noise control by silencers
  • ISO 14164:1999 Stationary source emissions – Determination of the volume flowrate of gas streams in ducts – Automated method
  • ISO/IEC 14165 Information technology - Fibre Channel
    • ISO/IEC 14165-114:2005 Part 114: 100 MB/s Balanced copper physical interface (FC-100-DF-EL-S)
    • ISO/IEC 14165-115:2006 Part 115: Physical Interfaces (FC-PI)
    • ISO/IEC 14165-116:2005 Part 116: 10 Gigabit (10GFC)
    • ISO/IEC TR 14165-117:2007 Part 117: Methodologies for jitter and signal quality (MJSQ)
    • ISO/IEC 14165-122:2005 Part 122: Arbitrated Loop-2 (FC-AL-2)
    • ISO/IEC 14165-131:2000 Part 131: Switch Fabric Requirements (FC-SW)
    • ISO/IEC 14165-133:2010 Part 133: Switch Fabric-3 (FC-SW-3)
    • ISO/IEC 14165-141:2001 Part 141: Fabric Generic Requirements (FC-FG)
    • ISO/IEC 14165-211:1999 Part 211: Mapping to HIPPI-FP (FC-FP)
    • ISO/IEC 14165-222:2005 Part 222: Single-byte command code 2 mapping protocol (FC-SB-2)
    • ISO/IEC 14165-241:2005 Part 241: Backbone 2 (FC-BB-2)
    • ISO/IEC 14165-243:2012 Part 243: Backbone 3 (FC-BB-3)
    • ISO/IEC 14165-251:2008 Part 251: Framing and Signaling (FC-FS)
    • ISO/IEC TR 14165-312:2009 Part 312: Avionics environment upper layer protocol MIL-STD-1553B Notice 2 (FC-AE-1553)
    • ISO/IEC TR 14165-313:2013 Part 313: Avionics Environment—Anonymous Synchronous Messaging (FC-AE-ASM)
    • ISO/IEC TR 14165-314:2013 Part 314: Avionics Environment – Remote Direct Memory Access (FC-AE-RDMA)
    • ISO/IEC 14165-321:2009 Part 321: Audio-Video (FC-AV)
    • ISO/IEC 14165-331:2007 Part 331: Virtual Interface (FC-VI)
    • ISO/IEC TR 14165-372:2011 Part 372: Methodologies of interconnects-2 (FC-MI-2)
    • ISO/IEC 14165-414:2007 Part 414: Generic Services—4 (FC-GS-4)
    • ISO/IEC 14165-521:2009 Part 521: Fabric application interface standard (FAIS)
  • ISO/IEC 14169:1995 Information technology – 90 mm flexible disk cartridges – 21 MBytes formatted capacity – ISO Type 305
  • ISO 14189:2013 Water quality – Enumeration of Clostridium perfringens – Method using membrane filtration
  • ISO 14199:2015 Health informatics – Information models – Biomedical Research Integrated Domain Group (BRIDG) Model
  • ISO 14223 Radiofrequency identification of animals – Advanced transponders
  • ISO 14224 Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
  • ISO 14230 Road vehicles – Diagnostic systems – Keyword Protocol 2000
  • ISO 14242 Implants for surgery – Wear of total hip-joint prostheses
    • ISO 14242-1:2014 Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
    • ISO 14242-2:2016 Part 2: Methods of measurement
    • ISO 14242-3:2009 Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test
  • ISO 14243 Implants for surgery – Wear of total knee-joint prostheses
    • ISO 14243-1:2009 Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
    • ISO 14243-2:2016 Part 2: Methods of measurement
    • ISO 14243-3:2014 Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
  • ISO/IEC 14251:1995 Information technology – Data interchange on 12,7 mm 36-track magnetic tape cartridges
  • ISO/IEC TR 14252:1996 Information technology - Guide to the POSIX Open System Environment (OSE) [Withdrawn without replacement]
  • ISO 14253 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment
    • ISO 14253-1:2013 Part 1: Decision rules for proving conformity or nonconformity with specifications
    • ISO 14253-2:2011 Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
    • ISO 14253-3:2011 Part 3: Guidelines for achieving agreements on measurement uncertainty statements
    • ISO/TS 14253-4:2010 Part 4: Background on functional limits and specification limits in decision rules
    • ISO 14253-5:2015 Part 5: Uncertainty in verification testing of indicating measuring instruments
    • ISO/TR 14253-6:2012 Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
  • ISO/TS 14265:2011 Health Informatics – Classification of purposes for processing personal health information
  • ISO/TR 14283:2004 Implants for surgery – Fundamental principles
  • ISO 14289 Document management applications - Electronic document file format enhancement for accessibility
    • ISO 14289-1:2014 Part 1: Use of ISO 32000-1 (PDF/UA-1)
  • ISO/TR 14292:2012 Health informatics – Personal health records – Definition, scope and context
  • ISO 14296:2016 Intelligent transport systems – Extension of map database specifications for applications of cooperative ITS
  • ISO 14302:2002 Space systems – Electromagnetic compatibility requirements
  • ISO 14362 Textiles - Methods for determination of certain aromatic amines derived from azo colorants
    • ISO 14362-1:2017 Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres
    • ISO 14362-3:2017 Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene
  • ISO/IEC TR 14369:2014 Information technology - Programming languages, their environments and system software interfaces - Guidelines for the preparation of Language-Independent Service Specifications (LISS)
  • ISO 14405 Geometrical product specifications (GPS) – Dimensional tolerancing
    • :2016 Part 1: Linear sizes
    • ISO 14405-2:2011 Part 2: Dimensions other than linear sizes
    • ISO 14405-3:2016 Part 3: Angular sizes
  • ISO 14406:2010 Geometrical product specifications (GPS) - Extraction
  • ISO 14408:2016 Tracheal tubes designed for laser surgery – Requirements for marking and accompanying information
  • ISO 14416:2003 Information and documentation – Requirements for binding of books, periodicals, serials and other paper documents for archive and library use – Methods and materials
  • ISO/IEC 14417:1999 Information technology – Data recording format DD-1 for magnetic tape cassette conforming to IEC 1016
  • ISO/TS 14441:2013 Health informatics – Security and privacy requirements of EHR systems for use in conformity assessment
  • ISO/IEC 14443 Identification cards – Contactless integrated circuit cards – Proximity cards
  • ISO 14451 Pyrotechnic articles – Pyrotechnic articles for vehicles
    • ISO 14451-1:2013 Part 1: Terminology
  • ISO 14452:2012 Network services billing – Requirements
  • ISO 14461 Milk and milk products – Quality control in microbiological laboratories
    • ISO 14461-1:2005 Part 1: Analyst performance assessment for colony counts
    • ISO 14461-2:2005 Part 2: Determination of the reliability of colony counts of parallel plates and subsequent dilution steps
  • :2010 Information technology - Open-edi reference model
  • ISO/TR 14468:2010 Selected illustrations of attribute agreement analysis
  • ISO/IEC TR 14471:2007 Information technology - Software engineering - Guidelines for the adoption of CASE tools
  • ISO/IEC 14473:1999 Information technology - Office equipment - Minimum information to be specified for image scanners
  • ISO/IEC 14474:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Functional requirements for static circuit-mode inter-PINX connections
  • ISO/IEC TR 14475:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Architecture and scenarios for Private Integrated Services Networking
  • ISO/IEC 14476 Information technology – Enhanced communications transport protocol
    • ISO/IEC 14476-1:2002 Specification of simplex multicast transport
    • ISO/IEC 14476-2:2003 Specification of QoS management for simplex multicast transport
    • ISO/IEC 14476-3:2008 Specification of duplex multicast transport
    • ISO/IEC 14476-4:2010 Specification of QoS management for duplex multicast transport
    • ISO/IEC 14476-5:2008 Specification of N-plex multicast transport
    • ISO/IEC 14476-6:2010 Specification of QoS management for n-plex multicast transport
  • ISO/IEC 14478 Information technology - Computer graphics and image processing - Presentation Environment for Multimedia Objects (PREMO)
    • ISO/IEC 14478-1:1998 Part 1: Fundamentals of PREMO
    • ISO/IEC 14478-2:1998 Part 2: Foundation Component
    • ISO/IEC 14478-3:1998 Part 3: Multimedia Systems Services
    • ISO/IEC 14478-4:1998 Part 4: Modelling, rendering and interaction component
  • ISO/IEC 14492:2001 Information technology - Lossy/lossless coding of bi-level images
  • ISO/IEC 14495 Information technology - Lossless and near-lossless compression of continuous-tone still images
    • ISO/IEC 14495-1:1999 Baseline
    • ISO/IEC 14495-2:2003 Extensions
  • ISO/IEC 14496 Information technology – Coding of audio-visual objects
  • ISO 14500:2003 Textile machinery and accessories – Harnesses for Jacquard weaving machines – Vocabulary
  • ISO 14509 Small craft – Airborne sound emitted by powered recreational craft
    • ISO 14509-1:2008 Part 1: Pass-by measurement procedures
    • ISO 14509-3:2009 Part 3: Sound assessment using calculation and measurement procedures
  • ISO 14511:2001 Measurement of fluid flow in closed conduits – Thermal mass flowmeters
  • ISO/IEC 14515 Information technology - Portable Operating System Interface (POSIX®) - Test methods for measuring conformance to POSIX
    • ISO/IEC 14515-1:2000 Part 1: System interfaces
  • ISO/IEC TR 14516:2002 Information technology - Security techniques - Guidelines for the use and management of Trusted Third Party services
  • ISO/IEC 14517:1996 Information technology - 130 mm optical disk cartridges for information interchange - Capacity: 2,6 Gbytes per cartridge
  • ISO/IEC 14519:2001 Information technology - POSIX Ada Language Interfaces - Binding for System Application Program Interface (API)
  • ISO 14532:2014 Natural gas – Vocabulary
  • ISO 14533 Processes, data elements and documents in commerce, industry and administration – Long term signature profiles
    • ISO 14533-1:2014 Part 1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES)
    • ISO 14533-2:2012 Part 2: Long term signature profiles for XML Advanced Electronic Signatures (XAdES)
    • ISO 14533-3:2017 Part 3: Long term signature profiles for PDF Advanced Electronic Signatures (PAdES)
  • ISO 14534:2011 Ophthalmic optics – Contact lenses and contact lens care products – Fundamental requirements
  • ISO 14539:2000 Manipulating industrial robots - Object handling with grasp-type grippers - Vocabulary and presentation of characteristics
  • ISO/IEC 14543 Information technology – Home Electronic System (HES) architecture
    • ISO/IEC 14543-2-1:2006 Part 2-1: Introduction and device modularity
    • ISO/IEC 14543-3-1:2006 Part 3-1: Communication layers – Application layer for network based control of HES Class 1
    • ISO/IEC 14543-3-2:2006 Part 3-2: Communication layers – Transport, network and general parts of data link layer for network based control of HES Class 1
    • ISO/IEC 14543-3-3:2007 Part 3-3: User process for network based control of HES Class 1
    • ISO/IEC 14543-3-4:2007 Part 3-4: System management – Management procedures for network based control of HES Class 1
    • ISO/IEC 14543-3-5:2007 Part 3-5: Media and media dependent layers – Power line for network based control of HES Class 1
    • ISO/IEC 14543-3-6:2007 Part 3-6: Media and media dependent layers – Network based on HES Class 1, twisted pair
    • ISO/IEC 14543-3-7:2007 Part 3-7: Media and media dependent layers – Radio frequency for network based control of HES Class 1
    • ISO/IEC 14543-3-10:2012 Part 3-10: Wireless short-packet (WSP) protocol optimized for energy harvesting – Architecture and lower layer protocols
    • ISO/IEC 14543-3-11:2016 Part 3-11: Frequency modulated wireless short-packet (FMWSP) protocol optimised for energy harvesting – Architecture and lower layer protocols
    • ISO/IEC TR 14543-4:2002 Part 4: Home and building automation in a mixed-use building
    • ISO/IEC 14543-4-1:2008 Part 4-1: Communication layers – Application layer for network enhanced control devices of HES Class 1
    • ISO/IEC 14543-4-2:2008 Part 4-2: Communication layers – Transport, network and general parts of data link layer for network enhanced control devices of HES Class 1
    • ISO/IEC 14543-4-3:2015 Part 4-3: Application layer interface to lower communications layers for network enhanced control devices of HES Class 1
    • ISO/IEC 14543-5-1:2010 Part 5-1: Intelligent grouping and resource sharing for Class 2 and Class 3 – Core protocol
    • ISO/IEC 14543-5-3:2012 Part 5-3: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Basic application
    • ISO/IEC 14543-5-4:2010 Part 5-4: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Device validation
    • ISO/IEC 14543-5-5:2012 Part 5-5: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Device type
    • ISO/IEC 14543-5-6:2012 Part 5-6: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Service type
    • ISO/IEC 14543-5-7:2015 Part 5-7: Intelligent grouping and 3 resource sharing – Remote access system architecture
    • ISO/IEC 14543-5-8:2017 Part 5-8: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Remote access core protocol
    • ISO/IEC 14543-5-9:2017 Part 5-9: Intelligent grouping and resource sharing for HES class 2 and class 3 – Remote access service platform
    • ISO/IEC 14543-5-21:2012 Part 5-21: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Application profile – AV profile
    • ISO/IEC 14543-5-22:2010 Part 5-22: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Application profile – File profile
  • ISO 14560:2004 Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million
  • ISO/TR 14564:1995 Shipbuilding and marine structures - Marking of escape routes
  • ISO/IEC 14568:1997 Information technology - DXL: Diagram eXchange Language for tree-structured charts
  • ISO/IEC 14575:2000 Information technology - Microprocessor systems - Heterogeneous InterConnect (HIC) (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction)
  • ISO/IEC 14576:1999 Information technology - Synchronous Split Transfer Type System Bus (STbus) - Logical Layer
  • ISO 14588:2000 Blind rivets - Terminology and definitions
  • ISO/IEC 14598 Software engineering - Product evaluation[Note 3]
    • ISO/IEC 14598-5:1998 Part 5: Process for evaluators
    • ISO/IEC 14598-6:2001 Part 6: Documentation of evaluation modules
  • ISO 14602:2010 Non-active surgical implants – Implants for osteosynthesis – Particular requirements
  • ISO 14607:2007 Non-active surgical implants – Mammary implants – Particular requirements
  • ISO 14617 Graphical symbols for diagrams
    • ISO 14617-1:2005 Part 1: General information and indexes
    • ISO 14617-2:2002 Part 2: Symbols having general application
    • ISO 14617-3:2002 Part 3: Connections and related devices
    • ISO 14617-3:2002 Part 3: Connections and related devices
    • ISO 14617-4:2002 Part 4: Actuators and related devices
    • ISO 14617-5:2002 Part 5: Measurement and control devices
    • ISO 14617-6:2002 Part 6: Measurement and control functions
    • ISO 14617-7:2002 Part 7: Basic mechanical components
    • ISO 14617-8:2002 Part 8: Valves and dampers
    • ISO 14617-9:2002 Part 9: Pumps, compressors and fans
    • ISO 14617-10:2002 Part 10: Fluid power converters
    • ISO 14617-11:2002 Part 11: Devices for heat transfer and heat engines
    • ISO 14617-12:2002 Part 12: Devices for separating, purification and mixing
    • ISO 14617-13:2004 Part 13: Devices for material processing
    • ISO 14617-14:2004 Part 14: Devices for transport and handling of material
    • ISO 14617-15:2002 Part 15: Installation diagrams and network maps
  • ISO 14630:2012 Non-active surgical implants – General requirements
  • ISO 14638:2015 Geometrical product specifications (GPS) - Matrix model
  • ISO/TR 14639 Health informatics – Capacity-based eHealth architecture roadmap
    • ISO/TR 14639-1:2012 Part 1: Overview of national eHealth initiatives
    • ISO/TR 14639-2:2014 Part 2: Architectural components and maturity model
  • Electronic archiving
    • ISO 14641-1:2012 Specifications concerning the design and the operation of an information system for electronic information preservation
  • ISO 14644 Cleanrooms and associated controlled environments
  • ISO/IEC 14651:2016 Information technology - International string ordering and comparison - Method for comparing character strings and description of the common template tailorable ordering
  • ISO/IEC 14662:2010 Information technology – Open-edi reference model
  • ISO/TR 14685:2001 Hydrometric determinations – Geophysical logging of boreholes for hydrogeological purposes – Considerations and guidelines for making measurements
  • ISO 14686:2003 Hydrometric determinations – Pumping tests for water wells – Considerations and guidelines for design, performance and use
  • ISO 14695:2003 Industrial fans – Method of measurement of fan vibration
  • ISO 14698 Cleanrooms and associated controlled environments – Biocontamination control
    • ISO 14698-1:2003 General principles and methods
    • ISO 14698-2:2003 Evaluation and interpretation of biocontamination data
  • ISO/IEC 14699:1997 Information technology – Open Systems Interconnection – Transport Fast Byte Protocol
  • ISO/IEC 14700:1997 Information technology – Open Systems Interconnection – Network Fast Byte Protocol
  • ISO 14708 Implants for surgery – Active implantable medical devices
    • ISO 14708-1:2014 Part 1: General requirements for safety, marking and for information to be provided by the manufacturer
    • ISO 14708-2:2012 Part 2: Cardiac pacemakers
    • ISO 14708-3:2017 Part 3: Implantable neurostimulators
    • ISO 14708-4:2008 Part 4: Implantable infusion pumps
    • ISO 14708-5:2010 Part 5: Circulatory support devices
    • ISO 14708-6:2010 Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators)
    • ISO 14708-7:2013 Part 7: Particular requirements for cochlear implant systems
  • ISO/IEC 14709 Information technology - Configuration of Customer Premises Cabling (CPC) for applications
  • ISO 14722:1998 Moped and moped-rider kinematics – Vocabulary
  • ISO 14726:2008 Ships and marine technology – Identification colours for the content of piping systems
  • ISO 14729:2001 Ophthalmic optics – Contact lens care products – Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses
  • ISO 14730:2014 Ophthalmic optics – Contact lens care products – Antimicrobial preservative efficacy testing and guidance on determining discard date
  • ISO 14739 Document management - 3D use of Product Representation Compact (PRC) format
    • ISO 14739-1:2014 Part 1: PRC 10001
  • ISO/TR 14742:2010 Financial services – Recommendations on cryptographic algorithms and their use
  • ISO/IEC 14750:1999 Information technology – Open Distributed Processing – Interface Definition Language
  • ISO/IEC 14752:2000 Information technology - Open Distributed Processing - Protocol support for computational interactions
  • ISO/IEC 14753:1999 Information technology - Open Distributed Processing - Interface references and binding
  • ISO/IEC 14754:1999 Information technology – Pen-Based Interfaces – Common gestures for Text Editing with Pen-Based Systems
  • ISO/IEC 14755:1997 Information technology – Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
  • ISO/IEC 14756:1999 Information technology - Measurement and rating of performance of computer-based software systems
  • ISO/IEC 14760:1997 Information technology - Data interchange on 90 mm overwritable and read only optical disk cartridges using phase change - Capacity: 1,3 Gbytes per cartridge
  • ISO/IEC 14762:2009 Information technology - Functional safety requirements for Home and Building Electronic Systems (HBES)
  • ISO/IEC 14763 Information technology - Implementation and operation of customer premises cabling
    • ISO/IEC 14763-1:1999 Part 1: Administration
    • ISO/IEC 14763-2:2012 Part 2: Planning and installation
    • ISO/IEC TR 14763-2-1:2011 Part 2-1: Planning and installation - Identifiers within administration systems
    • ISO/IEC 14763-3:2014 Part 3: Testing of optical fibre cabling
  • ISO/IEC 14764:2006 Software Engineering - Software Life Cycle Processes - Maintenance
  • ISO/IEC 14765:1997 Information technology - Framework for protocol identification and encapsulation
  • ISO/IEC 14766:1997 Information technology - Telecommunications and information exchange between systems - Use of OSI applications over the Internet Transmission Control Protocol (TCP)
  • ISO/IEC 14769:2001 Information technology - Open Distributed Processing - Type Repository Function
  • ISO/IEC 14771:1999 Information technology - Open Distributed Processing - Naming framework
  • ISO/IEC 14772 Information technology - Computer graphics and image processing - The Virtual Reality Modeling Language (VRML)[Note 3]
    • ISO/IEC 14772-1:1997 Part 1: Functional specification and UTF-8 encoding
    • ISO/IEC 14772-2:2004 Part 2: External authoring interface (EAI)
  • ISO/IEC 14776 Information technology - Small Computer System Interface (SCSI)[Note 3]
    • ISO/IEC 14776-112:2002 Part 112: Parallel Interface-2 (SPI-2)
    • ISO/IEC 14776-113:2002 Part 113: Parallel Interface-3 (SPI-3)
    • ISO/IEC 14776-115:2004 Part 115: Parallel Interface-5 (SPI-5)
    • ISO/IEC 14776-121:2010 Part 121: Passive Interconnect Performance (PIP)
    • ISO/IEC 14776-150:2004 Part 150: Serial Attached SCSI (SAS)
    • ISO/IEC 14776-151:2010 Part 151: Serial Attached SCSI - 1.1 (SAS-1.1)
    • ISO/IEC 14776-153:2015 Part 153: Serial Attached SCSI - 2.1 (SAS-2.1)
    • ISO/IEC 14776-222:2005 Part 222: Fibre Channel Protocol for SCSI, Second Version (FCP-2)
    • ISO/IEC 14776-223:2008 Part 223: Fibre Channel Protocol for SCSI, Third Version (FCP-3)
    • ISO/IEC 14776-232:2001 Part 232: Serial Bus Protocol 2 (SBP-2)
    • ISO/IEC 14776-251:2014 Part 251: USB attached SCSI (UAS)
    • ISO/IEC 14776-261:2012 Part 261: SAS Protocol Layer (SPL)
    • ISO/IEC 14776-262:2017 Part 262: SAS protocol layer - 2 (SPL-2)
    • ISO/IEC 14776-321:2002 Part 321: SCSI-3 Block Commands (SBC)
    • ISO/IEC 14776-322:2007 Part 322: SCSI Block Commands - 2 (SBC-2)
    • ISO/IEC 14776-323:2017 Part 323: SCSI Block commands - 3 (SBC-3)
    • ISO/IEC 14776-326:2015 Part 326: Reduced block commands (RBC)
    • ISO/IEC 14776-331:2002 Part 331: Stream Commands (SSC)
    • ISO/IEC 14776-333:2013 Part 333: SCSI Stream Commands - 3 (SSC-3)
    • ISO/IEC 14776-341:2000 Part 341: Controller Commands (SCC)
    • ISO/IEC 14776-342:2000 Part 342: Controller Commands - 2 (SCC-2)
    • ISO/IEC 14776-351:2007 Part 351: Medium Changer Commands (SCSI-3 SMC)
    • ISO/IEC 14776-362:2006 Part 362: Multimedia commands-2 (MMC-2)
    • ISO/IEC 14776-372:2011 Part 372: SCSI Enclosure Services - 2 (SES-2)
    • ISO/IEC 14776-381:2000 Part 381: Optical Memory Card Device Commands (OMC)
    • ISO/IEC 14776-411:1999 Part 411: SCSI-3 Architecture Model (SCSI-3 SAM)
    • ISO/IEC 14776-412:2006 Part 412: Architecture Model -2 (SAM-2)
    • ISO/IEC 14776-413:2007 Part 413: SCSI Architecture Model -3 (SAM-3)
    • ISO/IEC 14776-414:2009 Part 414: SCSI Architecture Model-4 (SAM-4)
    • ISO/IEC 14776-452:2005 Part 452: SCSI Primary Commands - 2 (SPC-2)
    • ISO/IEC 14776-453:2009 Part 453: Primary commands-3 (SPC-3)
  • ISO 14785:2014 Tourist information offices – Tourist information and reception services – Requirements
  • ISO/TR 14786:2014 Nanotechnologies – Considerations for the development of chemical nomenclature for selected nano-objects
  • ISO 14801 Dentistry – Implants – Dynamic fatigue test for endosseous dental implants
  • ISO/TR 14806:2013 Intelligent transport systems – Public transport requirements for the use of payment applications for fare media
  • ISO 14813 Intelligent transport systems – Reference model architecture(s) for the ITS sector
    • ISO 14813-1:2015 Part 1: ITS service domains, service groups and services
    • ISO 14813-5:2010 Part 5: Requirements for architecture description in ITS standards
    • ISO 14813-6:2009 Part 6: Data presentation in ASN.1
  • ISO 14814:2006 Road transport and traffic telematics – Automatic vehicle and equipment identification – Reference architecture and terminology
  • ISO 14815:2005 Road transport and traffic telematics – Automatic vehicle and equipment identification – System specifications
  • ISO 14816:2005 Road transport and traffic telematics – Automatic vehicle and equipment identification – Numbering and data structure
  • ISO 14817 Intelligent transport systems – ITS central data dictionaries
    • ISO 14817-1:2015 Part 1: Requirements for ITS data definitions
    • ISO 14817-2:2015 Part 2: Governance of the Central ITS Data Concept Registry
    • ISO 14817-3:2017 Part 3: Object identifier assignments for ITS data concepts
  • ISO 14819 Intelligent transport systems – Traffic and travel information messages via traffic message coding
    • ISO 14819-1:2013 Part 1: Coding protocol for Radio Data System – Traffic Message Channel (RDS-TMC) using ALERT-C
    • ISO 14819-2:2013 Part 2: Event and information codes for Radio Data System – Traffic Message Channel (RDS-TMC) using ALERT-C
    • ISO 14819-3:2013 Part 3: Location referencing for Radio Data System – Traffic Message Channel (RDS-TMC) using ALERT-C
    • ISO 14819-6:2006 Part 6: Encryption and conditional access for the Radio Data System – Traffic Message Channel ALERT C coding
  • ISO 14823:2017 Intelligent transport systems – Graphic data dictionary
  • ISO 14825:2011 Intelligent transport systems – Geographic Data Files (GDF) – GDF5.0
  • ISO 14827 Transport information and control systems – Data interfaces between centres for transport information and control systems
    • ISO 14827-1:2005 Part 1: Message definition requirements
    • ISO 14827-2:2005 Part 2: DATEX-ASN
  • ISO/IEC 14833:1996 Information technology – Data interchange on 12,7 mm 128-Track magnetic tape cartridges – DLT 3 format
  • ISO/IEC 14834:1996 Information technology - Distributed Transaction Processing - The XA Specification
  • ISO 14837 Mechanical vibration – Ground-borne noise and vibration arising from rail systems
    • ISO 14837-1:2005 Part 1: General guidance
    • ISO/TS 14837-32:2015 Part 32: Measurement of dynamic properties of the ground
  • ISO 14839 Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings
    • ISO 14839-1:2002 Part 1: Vocabulary
    • ISO 14839-2:2004 Part 2: Evaluation of vibration
    • ISO 14839-3:2006 Part 3: Evaluation of stability margin
    • ISO 14839-4:2012 Part 4: Technical guidelines
  • ISO/IEC 14840:1996 Information technology – 12,65 mm wide magnetic tape cartridge for information interchange – Helical scan recording – Data-D3-1 format
  • ISO/IEC 14841:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call offer supplementary service
  • ISO/IEC 14842:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Do not disturb and do not disturb override supplementary services
  • ISO/IEC 14843:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Offer supplementary service
  • ISO/IEC 14844:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Do Not Disturb and Do Not Disturb Override supplementary services
  • ISO/IEC 14845:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call intrusion supplementary service
  • ISO/IEC 14846:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Intrusion supplementary service
  • ISO 14855 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions – Method by analysis of evolved carbon dioxide
    • :2012 General method
    • :2007 Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
  • ISO/IEC 14863:1996 Information technology - System-Independent Data Format (SIDF)
  • ISO/TR 14873:2013 Information and documentation - Statistics and quality issues for web archiving
  • ISO 14879 Implants for surgery – Total knee-joint prostheses
    • ISO 14879-1:2000 Part 1: Determination of endurance properties of knee tibial trays
  • ISO 14880 Optics and photonics - Microlens arrays
    • ISO 14880-1:2016 Part 1: Vocabulary and general properties
    • ISO 14880-2:2006 Part 2: Test methods for wavefront aberrations
    • ISO 14880-3:2006 Part 3: Test methods for optical properties other than wavefront aberrations
    • ISO 14880-4:2006 Part 4: Test methods for geometrical properties
    • ISO/TR 14880-5:2010 Part 5: Guidance on testing
  • ISO 14881:2001 Integrated optics – Interfaces – Parameters relevant to coupling properties
  • ISO/IEC 14882:2014 Programming Languages – C++
  • ISO/IEC 14888 Information technology - Security techniques - Digital signatures with appendix
    • ISO/IEC 14888-1:2008 Part 1: General
    • ISO/IEC 14888-2:2008 Part 2: Integer factorization based mechanisms
    • ISO/IEC 14888-3:2016 Part 3: Discrete logarithm based mechanisms
  • ISO 14889:2013 Ophthalmic optics – Spectacle lenses – Fundamental requirements for uncut finished lenses
  • ISO/TS 14904:2002 Road transport and traffic telematics – Electronic fee collection (EFC) – Interface specification for clearing between operators
  • ISO 14906:2011 Electronic fee collection – Application interface definition for dedicated short-range communication
  • ISO/TS 14907 Electronic fee collection – Test procedures for user and fixed equipment
    • ISO/TS 14907-1:2015 Part 1: Description of test procedures
    • ISO/TS 14907-2:2016 Part 2: Conformance test for the on-board unit application interface
  • ISO/IEC 14908 Information technology - Control network protocol
    • ISO/IEC 14908-1:2012 Part 1: Protocol stack
    • ISO/IEC 14908-2:2012 Part 2: Twisted pair communication
    • ISO/IEC 14908-3:2012 Part 3: Power line channel specification
    • ISO/IEC 14908-4:2012 Part 4: IP communication
  • Software ergonomics for multimedia user interfaces
    • ISO 14915-1:2002 Part 1: Design principles and framework
    • ISO 14915-2:2003 Part 2: Multimedia navigation and control
    • ISO 14915-3:2002 Part 3: Media selection and combination
  • ISO 14917:2017 Thermal spraying - Terminology, classification
  • ISO 14949:2001 Implants for surgery – Two-part addition-cure silicone elastomers
  • ISO 14963:2003 Mechanical vibration and shock – Guidelines for dynamic tests and investigations on bridges and viaducts
  • ISO 14971:2007 Medical devices – Application of risk management to medical devices
  • ISO 14972:1998 Sterile obturators for single use with over-needle peripheral intravascular catheters
  • ISO 14975:2000 Surface chemical analysis – Information formats
  • ISO 14976:1998 Surface chemical analysis – Data transfer format
  • :1996 Information technology – Syntactic metalanguage – Extended BNF
  • ISO 14978:2006 Geometrical product specifications (GPS) – General concepts and requirements for GPS measuring equipment
  • ISO 14982:1998 Agricultural and forestry machinery – Electromagnetic compatibility – Test methods and acceptance criteria

ISO 15000 – ISO 15999

  • Electronic business eXtensible Markup Language ebXML
    • ISO 15000-5:2014 Part 5: Core Components Specification (CCS)
  • ISO 15001:2010 Anaesthetic and respiratory equipment – Compatibility with oxygen
  • ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems
  • ISO 15004 Ophthalmic instruments – Fundamental requirements and test methods
    • ISO 15004-1:2006 Part 1: General requirements applicable to all ophthalmic instruments
    • ISO 15004-2:2007 Part 2: Light hazard protection
  • ISO 15006:2011 Road vehicles – Ergonomic aspects of transport information and control systems – Specifications for in-vehicle auditory presentation
  • ISO 15010:1998 Disposable hanging devices for transfusion and infusion bottles – Requirements and test methods
  • ISO 15016:2015 Ships and marine technology - Guidelines for the assessment of speed and power performance by analysis of speed trial data
  • ISO/IEC 15018:2004 Information technology - Generic cabling for homes
  • ISO 15022 Securities – Scheme for messages (Data Field Dictionary)
  • ISO/IEC 15026 Systems and software engineering—Systems and software assurance
    • ISO/IEC 15026-1:2013 Part 1: Concepts and vocabulary
    • ISO/IEC 15026-2:2011 Part 2: Assurance case
    • ISO/IEC 15026-3:2015 Part 3: System integrity levels
    • ISO/IEC 15026-4:2012 Part 4: Assurance in the life cycle
  • ISO 15031 Road vehicles – Communication between vehicle and external equipment for emissions-related diagnostics
    • ISO 15031-2:2010 Part 2: Guidance on terms, definitions, abbreviations and acronyms
  • ISO 15032:2000 Prostheses – Structural testing of hip units
  • ISO/IEC 15041:1997 Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 640 Mbytes per cartridge
  • ISO/IEC TR 15044:2000 Information technology - Terminology for the Home Electronic System (HES)
  • ISO/IEC 15045 Information technology - Home Electronic System (HES) gateway
    • ISO/IEC 15045-1:2004 Part 1: A residential gateway model for HES
    • ISO/IEC 15045-2:2012 Part 2: Modularity and protocol
  • ISO/IEC 15049:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Advice of charge supplementary services
  • ISO/IEC 15050:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Advice Of Charge supplementary services
  • ISO/IEC 15051:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Recall supplementary service
  • ISO/IEC 15052:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Recall supplementary service
  • ISO/IEC 15053:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Interception additional network feature
  • ISO/IEC 15054:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Interception additional network feature
  • ISO/IEC 15055:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Transit counter additional network feature
  • ISO/IEC 15056:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Transit counter additional network feature
  • ISO/IEC 15067 Information technology - Home Electronic System (HES) application model[Note 3]
    • ISO/IEC TR 15067-2:1997 Part 2: Lighting model for HES
    • ISO/IEC 15067-3:2012 Part 3: Model of a demand-response energy management system for HES
    • ISO/IEC TR 15067-3-2:2016 Part 3-2: GridWise interoperability context-setting framework
    • ISO/IEC TR 15067-4:2001 Part 4: Security System for HES
  • ISO 15075:2003 Transport information and control systems – In-vehicle navigation systems – Communications message set requirements
  • ISO 15081:2011 Agricultural equipment - Graphical symbols for pressurized irrigation systems
  • Road vehicles – Tests for rigid plastic safety glazing materials
  • ISO 15086 Hydraulic fluid power – Determination of the fluid-borne noise characteristics of components and systems
    • ISO 15086-1:2001 Part 1: Introduction
    • ISO 15086-2:2000 Part 2: Measurement of the speed of sound in a fluid in a pipe
    • ISO 15086-3:2008 Part 3: Measurement of hydraulic impedance
  • Thermal performance of windows, doors and shading devices – Detailed calculations
  • Natural gas – Energy determination
  • ISO 15118 Road vehicles - Vehicle to grid communication interface
  • ISO 15137:2005 Self-adhesive hanging devices for infusion bottles and injection vials – Requirements and test methods
  • ISO 15142 Implants for surgery – Metal intramedullary nailing systems
    • ISO 15142-1:2003 Part 1: Intramedullary nails
    • ISO 15142-2:2003 Part 2: Locking components
    • ISO 15142-3:2003 Part 3: Connection devices and reamer diameter measurements
  • ISO 15143 Earth-moving machinery and mobile road construction machinery – Worksite data exchange
    • ISO 15143-1:2010 Part 1: System architecture
    • ISO 15143-2:2010 Part 2: Data dictionary
    • ISO/TS 15143-3:2016 Part 3: Telematics data
  • ISO/IEC 15145:1997 Information technology - Programming languages - FORTH
  • ISO/IEC 15149:2011 Information technology – Telecommunications and information exchange between systems – Magnetic field area network (MFAN)
    • ISO/IEC 15149-1:2014 Part 1: Air interface
    • ISO/IEC 15149-2:2015 Part 2: In-band Control Protocol for Wireless Power Transfer
    • ISO/IEC 15149-3:2016 Part 3: Relay Protocol for Extended Range
    • ISO/IEC 15149-4:2016 Part 4: Security Protocol for Authentication
  • ISO 15174:2012 Milk and milk products – Microbial coagulants – Determination of total milk-clotting activity
  • ISO 15188:2001 Project management guidelines for terminology standardization
  • ISO 15189:2012 Medical laboratories – Particular requirements for quality and competence
  • ISO/IEC 15200:1996 Information technology - Adaptive Lossless Data Compression algorithm (ALDC)
  • ISO/IEC 15205:2000 SBus - Chip and module interconnect bus
  • ISO 15212 Oscillation-type density meters
    • ISO 15212-1:1998 Part 1: Laboratory instruments
    • ISO 15212-2:2002 Part 2: Process instruments for homogeneous liquids
  • ISO 15213:2003 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions
  • ISO 15214:1998 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of mesophilic lactic acid bacteria – Colony-count technique at 30 degrees C
  • ISO 15216 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR[Note 3]
    • ISO 15216-1:2017 Part 1: Method for quantification
    • ISO/TS 15216-2:2013 Part 2: Method for qualitative detection
  • Medical devices – Symbols to be used with medical device labels, labelling, and information to be supplied
    • ISO 15223-1:2016 Part 1: General requirements
    • ISO 15223-2:2010 Part 2: Symbol development, selection and validation
  • ISO 15225:2016 Medical devices – Quality management – Medical device nomenclature data structure
  • ISO 15226:1999 Technical product documentation – Life cycle model and allocation of documents
  • ISO 15230:2007 Mechanical vibration and shock – Coupling forces at the man–machine interface for hand-transmitted vibration
  • ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination
  • ISO 15241:2012 Rolling bearings - Symbols for physical quantities
  • ISO 15253:2000 Ophthalmic optics and instruments – Optical devices for enhancing low vision
  • ISO 15254:2009 Ophthalmic optics and instruments – Electro-optical devices for enhancing low vision
  • ISO 15261:2004 Vibration and shock generating systems - Vocabulary
  • ISO/IEC TR 15285:1998 Information technology - An operational model for characters and glyphs
  • ISO/IEC 15286:1999 Information technology - 130 mm optical disk cartridges for information interchange - Capacity: 5,2 Gbytes per cartridge
  • ISO/IEC/IEEE 15288:2015 Systems and software engineering – System life cycle processes
  • :2017 Systems and software engineering – Content of life-cycle information items (documentation)
  • ISO/IEC 15291:1999 Information technology – Programming languages – Ada Semantic Interface Specification (ASIS)
  • ISO/IEC TR 15294:2000 Information technology – Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
  • ISO 15296:2004 Gas welding equipment - Vocabulary - Terms used for gas welding equipment
  • ISO/TR 15300:2001 Dentistry - Application of OSI clinical codification to the classification and coding of dental products
  • ISO/IEC 15307:1997 Information technology – Data interchange on 12,7 mm 128-track magnetic tape cartridges – DLT 4 format
  • ISO 15309:2013 Implants for surgery – Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices
  • ISO/PAS 15339 Graphic technology - Printing from digital data across multiple technologies
    • ISO/PAS 15339-1:2015 Part 1: Principles
    • ISO/PAS 15339-2:2015 Part 2: Characterized reference printing conditions, CRPC1-CRPC7
  • ISO 15367 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront
    • ISO 15367-1:2003 Part 1: Terminology and fundamental aspects
    • ISO 15367-2:2005 Part 2: Shack-Hartmann sensors
  • ISO 15368:2001 Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
  • ISO 15374:1998 Implants for surgery – Requirements for production of forgings
  • ISO 15375:2010 Medical infusion bottles – Suspension devices for multiple use – Requirements and test methods
  • ISO/TR 15377:2007 Measurement of fluid flow by means of pressure-differential devices – Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
  • ISO 15378:2017 Primary packaging materials for medicinal products – Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
  • ISO 15394:2009 Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels
  • Natural gas – Natural gas for use as a compressed fuel for vehicles
    • ISO 15403-1:2006 Part 1: Designation of the quality
    • ISO/TR 15403-2:2006 Part 2: Specification of the quality
  • ISO/IEC 15404:2000 Information technology – Office machines – Minimum information to be included in specification sheets – Facsimile equipment
  • ISO/IEC 15408 Information technology – Security techniques – Evaluation criteria for IT security
    • ISO/IEC 15408-1:2009 Part 1: Introduction and general model
    • ISO/IEC 15408-2:2008 Part 2: Security functional components
    • ISO/IEC 15408-3:2008 Part 3: Security assurance components
  • ISO/IEC TR 15410:1998 Information technology – Telecommunications and information exchange between systems – PISN mobility-general principles and services aspects
  • ISO/IEC 15411:1999 Information technology - Segmented keyboard layouts
  • ISO/IEC 15412:1999 Information technology - Portable computer keyboard layouts
  • ISO/IEC TR 15413:2001 Information technology - Font services - Abstract service definition
  • ISO/IEC 15414:2015 Information technology - Open data processing - Reference Model - Enterprise Language
  • ISO/IEC 15415:2011 Information technology - Automatic identification and data capture techniques - Bar code symbol print quality test specification - Two-dimensional symbols
  • ISO/IEC 15416:2016 Automatic identification and data capture techniques - Bar code print quality test specification - Linear symbols
  • ISO/IEC 15417:2007 Information technology - Automatic identification and data capture techniques - Code 128 bar code symbology specification
  • ISO/IEC 15418:2016 Information technology - Automatic identification and data capture techniques - GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance
  • ISO/IEC 15419:2009 Information technology - Automatic identification and data capture techniques - Bar code digital imaging and printing performance testing
  • ISO/IEC 15420:2009 Information technology - Automatic identification and data capture techniques - EAN/UPC bar code symbology specification
  • ISO/IEC 15421:2010 Information technology - Automatic identification and data capture techniques - Bar code master test specifications
  • ISO/IEC 15423:2009 Information technology - Automatic identification and data capture techniques - Bar code scanner and decoder performance testing
  • ISO/IEC 15424:2008 Information technology - Automatic identification and data capture techniques - Data Carrier Identifiers (including Symbology Identifiers)
  • ISO/IEC 15426 Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification
    • ISO/IEC 15426-1:2006 Part 1: Linear symbols
    • ISO/IEC 15426-2:2015 Part 2: Two-dimensional symbols
  • ISO/IEC 15428:1999 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Wireless Terminal Location Registration supplementary service and Wireless Terminal Information Exchange additional network feature
  • ISO/IEC 15429:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Wireless Terminal Location Registration supplementary service and Wireless Terminal Information exchange additional network feature
  • ISO/IEC 15430:1999 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Wireless terminal call handling additional network features
  • ISO/IEC 15431:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Wireless terminal call handling additional network features
  • ISO/IEC 15432:1999 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Wireless Terminal Authentication supplementary services (WTAT and WTAN)
  • ISO/IEC 15433:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Wireless Terminal Authentication supplementary services
  • :2006 Information technology – Automatic identification and data capture techniques – Syntax for high-capacity ADC media
  • ISO/IEC 15437:2001 Information technology - Enhancements to LOTOS (E-LOTOS)
  • ISO/IEC 15438:2015 Information technology - Automatic identification and data capture techniques - PDF417 bar code symbology specification
  • ISO/IEC TR 15440:2016 Information technology - Future keyboards and other input devices and entry methods
  • ISO/IEC TR 15443 Information technology - Security techniques - Security assurance framework
    • ISO/IEC TR 15443-1:2012 Part 1: Introduction and concepts
    • ISO/IEC TR 15443-2:2012 Part 2: Analysis
  • ISO/IEC 15444 Information technology – JPEG 2000 image coding system
    • ISO/IEC 15444-1:2016 Core coding system
    • ISO/IEC 15444-2:2004 Extensions
    • ISO/IEC 15444-3:2007 Motion JPEG 2000
    • ISO/IEC 15444-4:2004 Conformance testing
    • ISO/IEC 15444-5:2015 Reference software
    • ISO/IEC 15444-6:2013 Part 6: Compound image file format
    • ISO/IEC 15444-8:2007 Secure JPEG 2000
    • ISO/IEC 15444-9:2005 Interactivity tools, APIs and protocols
    • ISO/IEC 15444-10:2011 Extensions for three-dimensional data
    • ISO/IEC 15444-11:2007 Wireless
    • ISO/IEC 15444-12:2015 Part 12: ISO base media file format [Withdrawn, no replacement]
    • ISO/IEC 15444-13:2008 An entry level JPEG 2000 encoder
    • ISO/IEC 15444-14:2013 Part 14: XML representation and reference
  • ISO/IEC 15445:2000 Information technology – Document description and processing languages – HyperText Markup Language (HTML)
  • ISO/IEC TR 15446:2009 Information technology - Security techniques - Guide for the production of Protection Profiles and Security Targets
  • ISO/IEC 15457 Identification cards – Thin flexible cards
    • ISO/IEC 15457-1:2008 Part 1: Physical characteristics
    • ISO/IEC 15457-2:2007 Part 2: Magnetic recording technique
    • ISO/IEC 15457-3:2008 Part 3: Test methods
  • ISO/IEC 15459 Information technology - Automatic identification and data capture techniques - Unique identification
    • ISO/IEC 15459-1:2014 Part 1: Individual transport units
    • ISO/IEC 15459-2:2015 Part 2: Registration procedures
    • ISO/IEC 15459-3:2014 Part 3: Common rules
    • ISO/IEC 15459-4:2014 Part 4: Individual products and product packages
    • ISO/IEC 15459-5:2014 Part 5: Individual returnable transport items (RTIs)
    • ISO/IEC 15459-6:2014 Part 6: Groupings
  • ISO 15469:2004 Spatial distribution of daylight – CIE standard general sky
  • ISO/IEC 15474 Information technology - CDIF framework
    • ISO/IEC 15474-1:2002 Part 1: Overview
    • ISO/IEC 15474-2:2002 Part 2: Modelling and extensibility
  • ISO/IEC 15475 Information technology - CDIF transfer format
    • ISO/IEC 15475-1:2002 Part 1: General rules for syntaxes and encodings
    • ISO/IEC 15475-2:2002 Part 2: Syntax SYNTAX.1
    • ISO/IEC 15475-3:2002 Part 3: Encoding ENCODING.1
  • ISO/IEC 15476 Information technology - CDIF semantic metamodel
    • ISO/IEC 15476-1:2002 Part 1: Foundation
    • ISO/IEC 15476-2:2002 Part 2: Common
    • ISO/IEC 15476-3:2006 Part 3: Data definitions
    • ISO/IEC 15476-4:2005 Part 4: Data models
    • ISO/IEC 15476-6:2006 Part 6: State/event models
  • ISO/IEC 15485:1997 Information technology - Data interchange on 120 mm optical disk cartridges using phase change PD format - Capacity: 650 Mbytes per cartridge
  • ISO/IEC 15486:1998 Information technology - Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 2,6 Gbytes per cartridge
  • ISO 15489 Information and documentation – Records management
    • ISO 15489-1:2016 Part 1: Concepts and principles
    • ISO/TR 15489-2:2001 Part 2: Guidelines [Withdrawn, no replacement]
  • ISO/IEC 15498:1997 Information technology - Data interchange on 90 mm optical disk cartridges - HS-1 format - Capacity: 650 Mbytes per cartridge
  • ISO/IEC 15504 Information technology – Process assessment
  • ISO/IEC 15505:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Message Waiting Indication supplementary service
  • ISO/IEC 15506:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Message Waiting Indication supplementary service
  • ISO/IEC 15507:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – PINX clock synchronization
  • ISO 15511:2011 Information and documentation - International standard identifier for libraries and related organizations (ISIL)
  • ISO 15519 Specification for diagrams for process industry
    • ISO 15519-1:2010 Part 1: General rules
    • ISO 15519-2:2015 Part 2: Measurement and control
  • ISO/IEC 15521:1998 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-3 format using 125 m length tapes
  • ISO 15529:2010 Optics and photonics - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
  • ISO 15530 Geometrical product specifications (GPS) – Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement
    • ISO/TS 15530-1:2013 Part 1: Overview and metrological characteristics
    • ISO 15530-3:2011 Part 3: Use of calibrated workpieces or measurement standards
    • ISO/TS 15530-4:2008 Part 4: Evaluating task-specific measurement uncertainty using simulation
  • ISO 15553:2006 Water quality – Isolation and identification of Cryptosporidium oocysts and Giardia cysts from water
  • ISO 15583:2005 Ships and marine technology - Maritime standards list
  • ISO/TR 15599:2002 Digital codification of dental laboratory procedures
  • Specification and qualification of welding procedures for metallic materials – Welding procedure test
  • ISO 15622:2010 Intelligent transport systems – Adaptive Cruise Control systems – Performance requirements and test procedures
  • ISO 15623:2013 Intelligent transport systems – Forward vehicle collision warning systems – Performance requirements and test procedures
  • ISO/TS 15624:2001 Transport information and control systems – Traffic Impediment Warning Systems (TIWS) – System requirements
  • ISO 15628:2013 Intelligent transport systems – Dedicated short range communication (DSRC) – DSRC application layer
  • ISO 15638 Intelligent transport systems – Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV)[Note 3]
    • ISO 15638-1:2012 Part 1: Framework and architecture
    • ISO 15638-2:2013 Part 2: Common platform parameters using CALM
    • ISO 15638-3:2013 Part 3: Operating requirements, 'Approval Authority' procedures, and enforcement provisions for the providers of regulated services
    • ISO 15638-5:2013 Part 5: Generic vehicle information
    • ISO 15638-6:2014 Part 6: Regulated applications
    • ISO 15638-7:2013 Part 7: Other applications
    • ISO 15638-8:2014 Part 8: Vehicle access management
    • ISO/TS 15638-9:2013 Part 9: Remote electronic tachograph monitoring (RTM)
    • ISO 15638-10:2017 Part 10: Emergency messaging system/eCall
    • ISO 15638-11:2014 Part 11: Driver work records
    • ISO 15638-12:2014 Part 12: Vehicle mass monitoring
    • ISO/TS 15638-13:2015 Part 13: "Mass" information for jurisdictional control and enforcement
    • ISO 15638-14:2014 Part 14: Vehicle access control
    • ISO 15638-15:2014 Part 15: Vehicle location monitoring
    • ISO 15638-16:2014 Part 16: Vehicle speed monitoring
    • ISO 15638-17:2014 Part 17: Consignment and location monitoring
    • ISO 15638-18:2017 Part 18: ADR (Dangerous Goods)
    • ISO/TS 15638-19:2013 Part 19: Vehicle parking facilities (VPF)
  • ISO 15642:2003 Road construction and maintenance equipment – Asphalt mixing plants – Terminology and commercial specifications
  • ISO 15662:2006 Intelligent transport systems – Wide area communication – Protocol management information
  • ISO 15664:2001 Acoustics – Noise control design procedures for open plant
  • ISO 15665:2003 Acoustics – Acoustic insulation for pipes, valves and flanges
  • ISO 15667:2000 Acoustics – Guidelines for noise control by enclosures and cabins
  • ISO 15674:2016 Cardiovascular implants and artificial organs – Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags
  • ISO 15675:2016 Cardiovascular implants and artificial organs – Cardiopulmonary bypass systems – Arterial blood line filters
  • ISO 15676:2016 Cardiovascular implants and artificial organs – Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)
  • ISO 15686 Buildings and constructed assets – Service life planning
  • ISO 15688:2012 Road construction and maintenance equipment – Soil stabilizers – Terminology and commercial specifications
  • ISO 15689:2003 Road construction and maintenance equipment – Powder binder spreaders – Terminology and commercial specifications
  • ISO/IEC 15693 Identification cards – Contactless integrated circuit cards – Vicinity cards
  • ISO/TS 15696:2012 Cranes – List of equivalent terms
  • ISO 15706 Information and documentation – International Standard Audiovisual Number (ISAN)
  • ISO 15707:2001 Information and documentation – International Standard Musical Work Code (ISWC)
  • ISO/IEC 15718:1998 Information technology – Data interchange on 8 mm wide magnetic tape cartridge – Helical scan recording – HH-1 format
  • ISO/IEC 15731:1998 Information technology – 12,65 mm wide magnetic tape cassette for information interchange – Helical scan recording – DTF-1 format
  • ISO 15744:2002 Hand-held non-electric power tools – Noise measurement code – Engineering method (grade 2)
  • ISO 15747:2010 Plastic containers for intravenous injections
  • ISO 15752:2010 Ophthalmic instruments – Endoilluminators – Fundamental requirements and test methods for optical radiation safety
  • ISO/IEC 15757:1998 Information technology – Data interchange on 8 mm wide magnetic tape cartridge – Helical scan recording – DA-2 format
  • ISO 15759:2005 Medical infusion equipment – Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process
  • ISO/TS 15768:2000 Measurement of liquid velocity in open channels – Design, selection and use of electromagnetic current meters
  • ISO 15769:2010 Hydrometry – Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods
  • ISO/IEC 15771:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Common information additional network feature
  • ISO/IEC 15772:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Common Information additional network feature
  • ISO/IEC 15773:1998 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Transit counter additional network feature
  • ISO/IEC 15776:2001 VME64bus - Specification
  • ISO/IEC 15780:1998 Information technology – 8 mm wide magnetic tape cartridge – Helical scan recording – AIT-1 format
  • ISO 15782 Certificate management for financial services[Note 3]
    • ISO 15782-1:2009 Part 1: Public key certificates
    • ISO 15782-2:2001 Part 2: Certificate extensions
  • ISO 15783:2002 Seal-less rotodynamic pumps – Class II – Specification
  • ISO 15784 Intelligent transport systems (ITS) – Data exchange involving roadside modules communication
    • ISO 15784-1:2008 Part 1: General principles and documentation framework of application profiles
    • ISO 15784-2:2015 Part 2: Centre to field device communications using SNMP
    • ISO 15784-3:2008 Part 3: Application profile-data exchange (AP-DATEX)
  • ISO 15785:2002 Technical drawings – Symbolic presentation and indication of adhesive, fold and pressed joints
  • ISO 15786:2008 Technical drawings – Simplified representation and dimensioning of holes
  • ISO 15787:2016 Technical product documentation – Heat-treated ferrous parts – Presentation and indications
  • ISO 15798:2013 Ophthalmic implants – Ophthalmic viscosurgical devices
  • ISO/IEC 15802 Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Common specifications
    • ISO/IEC 15802-1:1995 Part 1: Medium Access Control (MAC) service definition
    • ISO/IEC 15802-3:1998 Part 3: Media Access Control (MAC) Bridges
  • ISO/IEC 15816:2002 Information technology - Security techniques - Security information objects for access control
  • :2009 Information and documentation – The Dublin Core metadata element set
    • ISO 15836-1:2017 Part 1: Core elements
  • ISO/TR 15847:2008 Graphic technology - Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment
  • ISO 15849:2001 Ships and marine technology – Guidelines for implementation of a fleet management system network
  • ISO/IEC 15851:1999 Information technology - Communication protocol - Open MUMPS Interconnect
  • ISO/IEC 15852:1999 Information technology - Programming languages - M Windowing API
  • ISO 15867:2003 Intermediate bulk containers (IBCs) for non-dangerous goods – Terminology
  • ISO 15870:2000 Powered industrial trucks - Safety signs and hazard pictorials - General principles
  • ISO 15878:2008 Road construction and maintenance equipment – Asphalt pavers – Terminology and commercial specifications
  • ISO/IEC 15895:1999 Information technology – Data interchange on 12,7 mm 128-track magnetic tape cartridges – DLT 3-XT format
  • ISO/IEC 15896:1999 Information technology – Data interchange on 12,7 mm 208-track magnetic tape cartridges – DLT 5 format
  • ISO/IEC 15897:2011 Information technology - User interfaces - Procedures for the registration of cultural elements
  • ISO/IEC 15898:1998 Information technology - Data interchange on 356 mm optical disk cartridges - WORM, using phase change technology - Capacity: 14,8 Gbytes and 25 Gbytes per cartridge
  • ISO/IEC 15899:1998 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Service description – Broadband connection oriented bearer services
  • ISO 15902:2004 Optics and photonics - Diffractive optics - Vocabulary
  • ISO/IEC 15909 Systems and software engineering - High-level Petri nets
    • ISO/IEC 15909-1:2004 Part 1: Concepts, definitions and graphical notation
    • ISO/IEC 15909-2:2011 Part 2: Transfer format
  • ISO 15919:2001 Information and documentation - Transliteration of Devanagari and related Indic scripts into Latin characters
  • ISO 15924:2004 Information and documentation – Codes for the representation of names of scripts
  • ISO 15926 - Integration of Life-cycle Data for Process Plants including Oil and Gas Production Facilities
  • ISO 15927 Hygrothermal performance of buildings – Calculation and presentation of climatic data
    • ISO 15927-1:2003 Part 1: Monthly means of single meteorological elements
    • ISO 15927-2:2009 Part 2: Hourly data for design cooling load
    • ISO 15927-3:2009 Part 3: Calculation of a driving rain index for vertical surfaces from hourly wind and rain data
    • ISO 15927-4:2005 Part 4: Hourly data for assessing the annual energy use for heating and cooling
    • ISO 15927-5:2004 Part 5: Data for design heat load for space heating
    • ISO 15927-6:2007 Part 6: Accumulated temperature differences (degree-days)
  • ISO 15930 Graphic technology – Prepress digital data exchange using PDF[Note 3]
  • ISO 15932:2013 Microbeam analysis - Analytical electron microscopy - Vocabulary
  • ISO/IEC 15938 Information technology - Multimedia content description interface
  • ISO/IEC/IEEE 15939:2017 Systems and software engineering - Measurement process
  • ISO/IEC 15940:2013 Systems and software engineering - Software Engineering Environment Services
  • ISO/IEC TR 15942:2000 Information technology - Programming languages - Guide for the use of the Ada programming language in high integrity systems
  • ISO/IEC 15944 Information technology - Business operational view
    • ISO/IEC 15944-1:2011 Part 1: Operational aspects of open-edi for implementation
    • ISO/IEC 15944-2:2015 Part 2: Registration of scenarios and their components as business objects
    • ISO/IEC 15944-4:2015 Part 4: Business transaction scenarios – Accounting and economic ontology
    • ISO/IEC 15944-5:2008 Part 5: Identification and referencing of requirements of jurisdictional domains as sources of external constraints
    • ISO/IEC TR 15944-6:2015 Part 6: Technical introduction to e-Business modelling
    • ISO/IEC 15944-7:2009 Part 7: eBusiness vocabulary
    • ISO/IEC 15944-8:2012 Part 8: Identification of privacy protection requirements as external constraints on business transactions
    • ISO/IEC 15944-9:2015 Part 9: Business transaction traceability framework for commitment exchange
    • ISO/IEC 15944-10:2013 Part 10: IT-enabled coded domains as semantic components in business transactions
    • ISO/IEC 15944-20:2015 Part 20: Linking business operational view to functional service view
  • ISO/IEC 15945:2002 Information technology - Security techniques - Specification of TTP services to support the application of digital signatures
  • ISO/IEC 15946 Information technology - Security techniques - Cryptographic techniques based on elliptic curves
    • ISO/IEC 15946-1:2016 Part 1: General
    • ISO/IEC 15946-5:2017 Part 5: Elliptic curve generation
  • Information technology – Computer graphics and image processing – Portable Network Graphics (PNG): Functional specification
  • ISO/IEC 15953:1999 Information technology – Open Systems Interconnection – Service definition for the Application Service Object Association Control Service Element
  • ISO/IEC 15954:1999 Information technology – Open Systems Interconnection – Connection-mode protocol for the Application Service Object Association Control Service Element
  • ISO/IEC 15955:1999 Information technology – Open Systems Interconnection – Connectionless protocol for the Application Service Object Association Control Service Element
  • ISO/IEC 15961 Information technology - Radio frequency identification (RFID) for item management: Data protocol
    • ISO/IEC 15961-1:2013 Part 1: Application interface
    • ISO/IEC 15961-4:2016 Part 4: Application interface commands for battery assist and sensor functionality
  • ISO/IEC 15962:2013 Information technology - Radio frequency identification (RFID) for item management - Data protocol: data encoding rules and logical memory functions
  • ISO/IEC 15963:2009 Information technology - Radio frequency identification for item management - Unique identification for RF tags
  • Natural gas – Measurement of properties – Volumetric properties: density, pressure, temperature and compression factor
  • ISO 15971:2008 Natural gas – Measurement of properties – Calorific value and Wobbe index
  • ISO 15985:2004 Plastics – Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions – Method by analysis of released biogas
  • ISO/IEC 15991:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Priority Interruption and Call Priority Interruption Protection supplementary services
  • ISO/IEC 15992:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Priority Interruption and Call Priority Interruption Protection supplementary services

ISO 16000 – ISO 16999

  • ISO/TR 16015:2003 Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
  • ISO 16016:2016 Technical product documentation – Protection notices for restricting the use of documents and products
  • ISO 16020:2005 Steel for the reinforcement and prestressing of concrete – Vocabulary
  • ISO/IEC 16022:2006 Information technology - Automatic identification and data capture techniques - Data Matrix bar code symbology specification
  • ISO/IEC 16023:2000 Information technology - International symbology specification - MaxiCode
  • ISO 16032:2004 Acoustics – Measurement of sound pressure level from service equipment in buildings – Engineering method
  • ISO 16034:2002 Ophthalmic optics – Specifications for single-vision ready-to-wear near- vision spectacles
  • ISO 16039:2004 Road construction and maintenance equipment – Slipform pavers – Definitions and commercial specifications
  • ISO 16054:2000 Implants for surgery – Minimum data sets for surgical implants
  • ISO/TR 16056 Health informatics - Interoperability of telehealth systems and networks
    • ISO/TR 16056-1:2004 Part 1: Introduction and definitions
    • ISO/TR 16056-2:2004 Part 2: Real-time systems
  • ISO/TS 16058:2004 Health informatics – Interoperability of telelearning systems
  • ISO 16059:2007 Dentistry - Required elements for codification used in data exchange
  • ISO 16061:2015 Instrumentation for use in association with non-active surgical implants – General requirements
  • ISO 16063 Methods for the calibration of vibration and shock transducers
    • ISO 16063-1:1998 Part 1: Basic concepts
    • ISO 16063-11:1999 Part 11: Primary vibration calibration by laser interferometry
    • ISO 16063-12:2002 Part 12: Primary vibration calibration by the reciprocity method
    • ISO 16063-13:2001 Part 13: Primary shock calibration using laser interferometry
    • ISO 16063-15:2006 Part 15: Primary angular vibration calibration by laser interferometry
    • ISO 16063-16:2014 Part 16: Calibration by Earth's gravitation
    • ISO 16063-17:2016 Part 17: Primary calibration by centrifuge
    • ISO 16063-21:2003 Part 21: Vibration calibration by comparison to a reference transducer
    • ISO 16063-22:2005 Part 22: Shock calibration by comparison to a reference transducer
    • ISO 16063-31:2009 Part 31: Testing of transverse vibration sensitivity
    • ISO 16063-32:2016 Part 32: Resonance testing – Testing the frequency and the phase response of accelerometers by means of shock excitation
    • ISO 16063-33:2017 Part 33: Testing of magnetic field sensitivity
    • ISO 16063-41:2011 Part 41: Calibration of laser vibrometers
    • ISO 16063-42:2014 Part 42: Calibration of seismometers with high accuracy using acceleration of gravity
    • ISO 16063-43:2015 Part 43: Calibration of accelerometers by model-based parameter identification
    • ISO 16063-45:2017 Part 45: In-situ calibration of transducers with built in calibration coil
  • ISO 16069:2004 Graphical symbols - Safety signs - Safety way guidance systems (SWGS)
  • ISO/IEC 16085:2006 Systems and software engineering - Life cycle processes - Risk management
  • ISO 16087:2013 Implants for surgery – Roentgen stereophotogrammetric analysis for the assessment of migration of orthopaedic implants
  • ISO 16103:2005 Packaging - Transport packaging for dangerous goods - Recycled plastics material
  • ISO 16106:2006 Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings—Guidelines for the application of ISO 9001
  • Earthquake- and subsidence-resistant design of ductile iron pipelines
  • ISO 16140 Microbiology of the food chain – Method validation
    • ISO 16140-1:2016 Part 1: Vocabulary
    • ISO 16140-2:2016 Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method
  • ISO 16142 Medical devices – Recognized essential principles of safety and performance of medical devices
    • ISO 16142-1:2016 Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards
    • ISO 16142-2:2017 Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards
  • ISO/TR 16153:2004 Piston-operated volumetric instruments – Determination of uncertainty for volume measurements made using the photometric method
  • ISO 16155:2006 Ships and marine technology – Computer applications – Shipboard loading instruments
  • ISO 16165:2013 Ships and marine technology - Marine environment protection - Terminology relating to oil spill response
  • ISO/IEC TR 16166:2010 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – Security of session-based communications
  • ISO/IEC TR 16167:2011 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – Emergency calls
  • ISO 16175 Information and documentation - Principles and functional requirements for records in electronic office environments
    • ISO 16175-1:2010 Part 1: Overview and statement of principles
    • ISO 16175-2:2011 Part 2: Guidelines and functional requirements for digital records management systems
    • ISO 16175-3:2010 Part 3: Guidelines and functional requirements for records in business systems
  • ISO 16192:2017 Space systems - Experience gained in space projects (lessons learned) - Principles and guidelines
  • ISO/TS 16195:2013 Nanotechnologies – Guidance for developing representative test materials consisting of nano-objects in dry powder form
  • ISO/TR 16196:2016 Nanotechnologies – Compilation and description of sample preparation and dosing methods for engineered and manufactured nanomaterials
  • ISO/TR 16197:2014 Nanotechnologies – Compilation and description of toxicological screening methods for manufactured nanomaterials
  • ISO 16212:2017 Cosmetics – Microbiology – Enumeration of yeast and mould
  • ISO/TR 16218:2013 Packaging and the environment - Processes for chemical recovery
  • Road vehicles – Cleanliness of components of fluid circuits
    • ISO 16232-1:2007 Part 1: Vocabulary
    • ISO 16232-2:2007 Part 2: Method of extraction of contaminants by agitation
    • ISO 16232-3:2007 Part 3: Method of extraction of contaminants by pressure rinsing
    • ISO 16232-4:2007 Part 4: Method of extraction of contaminants by ultrasonic techniques
    • ISO 16232-5:2007 Part 5: Method of extraction of contaminants on functional test bench
    • ISO 16232-6:2007 Part 6: Particle mass determination by gravimetric analysis
    • ISO 16232-7:2007 Part 7: Particle sizing and counting by microscopic analysis
    • ISO 16232-8:2007 Part 8: Particle nature determination by microscopic analysis
    • ISO 16232-9:2007 Part 10: Particle sizing and counting by automatic light extinction particle counter
    • ISO 16232-10:2007 Part 10: Expression of results
  • ISO 16239:2013 Metric series wires for measuring screw threads
  • ISO 16245:2009 Information and documentation - Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents
  • ISO 16249:2013 Springs – Symbols
  • ISO 16254:2016 Acoustics – Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation – Engineering method
  • ISO/IEC 16262:2011 Information technology – Programming languages, their environments and system software interfaces – ECMAScript language specification
  • ISO 16269 Statistical interpretation of data
    • ISO 16269-4:2010 Part 4: Detection and treatment of outliers
    • ISO 16269-6:2014 Part 6: Determination of statistical tolerance intervals
    • ISO 16269-7:2001 Part 7: Median - Estimation and confidence intervals
    • ISO 16269-8:2004 Part 8: Determination of prediction intervals
  • ISO/TS 16277 Health informatics – Categorial structures of clinical findings in traditional medicine
    • ISO/TS 16277-1:2015 Part 1: Traditional Chinese, Japanese and Korean medicine
  • ISO 16278:2016 Health informatics – Categorial structure for terminological systems of human anatomy
  • ISO 16284:2006 Ophthalmic optics – Information interchange for ophthalmic optical equipment
  • ISO/TR 16310:2014 Symbol libraries for construction and facilities management
  • ISO/IEC 16317:2011 Information technology – Telecommunications and information exchange between systems – proxZzzy for sleeping hosts
  • ISO/IEC/IEEE 16326:2009 Systems and software engineering - Life cycle processes - Project management
  • ISO 16331 Optics and optical instruments – Laboratory procedures for testing surveying and construction instruments
    • ISO 16331-1:2017 Part 1: Performance of handheld laser distance meters
  • ISO 16336:2014 Applications of statistical and related methods to new technology and product development process - Robust parameter design (RPD)
  • ISO/IEC 16350:2015 Information technology - Systems and software engineering - Application management
  • ISO/IEC 16353:2011 Information technology – Telecommunications and information exchange between systems – Front-end configuration command for NFC-WI (NFC-FEC)
  • ISO 16355 Applications of statistical and related methods to new technology and product development process
    • ISO 16355-1:2015 Part 1: General principles and perspectives of Quality Function Deployment (QFD)
    • ISO 16355-2:2017 Part 2: Non-quantitative approaches for the acquisition of voice of customer and voice of stakeholder
    • ISO 16355-4:2017 Part 4: Analysis of non-quantitative and quantitative Voice of Customer and Voice of Stakeholder
    • ISO 16355-5:2017 Part 5: Solution strategy
    • ISO/TR 16355-8:2017 Part 8: Guidelines for commercialization and life cycle
  • ISO/TR 16379:2014 Tissue-engineered medical products – Evaluation of anisotropic structure of articular cartilage using DT (Diffusion Tensor)-MR Imaging
  • ISO/IEC 16382:2000 Information technology – Data interchange on 12,7 mm 208-track magnetic tape cartridges – DLT 6 format
  • ISO/IEC 16388:2007 Information technology - Automatic identification and data capture techniques - Code 39 bar code symbology specification
  • ISO/IEC 16390:2007 Information technology - Automatic identification and data capture techniques - Interleaved 2 of 5 bar code symbology specification
  • ISO/TS 16401 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-2
    • ISO/TS 16401-1:2012 Part 1: Test suite structure and test purposes
    • ISO/TS 16401-2:2012 Part 2: Abstract test suite
  • ISO 16402:2008 Implants for surgery – Acrylic resin cement – Flexural fatigue testing of acrylic resin cements used in orthopaedics
  • ISO/TS 16407 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-1
    • ISO/TS 16407-1:2011 Part 1: Test suite structure and test purposes
    • ISO/TS 16407-2:2012 Part 2: Abstract test suite
  • ISO/TS 16410 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-3
    • ISO/TS 16410-1:2011 Part 1: Test suite structure and test purposes
    • ISO/TS 16410-2:2012 Part 2: Abstract test suite
  • ISO 16413:2013 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry – Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
  • ISO 16428:2005 Implants for surgery – Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices
  • ISO 16429:2004 Implants for surgery – Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods
  • ISO 16437:2012 Ships and marine technology - Lifesaving and fire protection - Atmospheric oil mist detectors for ships
  • ISO 16439:2014 Information and documentation - Methods and procedures for assessing the impact of libraries
  • ISO 16443:2014 Dentistry - Vocabulary for dental implants systems and related procedure
  • ISO/IEC 16448:2002 Information technology - 120 mm DVD - Read-only disk
  • ISO/IEC 16449:2002 Information technology - 80 mm DVD - Read-only disk
  • ISO 16457:2014 Space systems – Space environment (natural and artificial) – The Earth's ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere
  • ISO/TS 16460:2016 Intelligent transport systems – Communications access for land mobiles (CALM) – Communication protocol messages for global usage
  • ISO/IEC 16480:2015 Information technology - Automatic identification and data capture techniques - Reading and display of ORM by mobile devices
  • ISO 16484 Building automation and control systems (BACS)
    • ISO 16484-1:2010 Part 1: Project specification and implementation
    • ISO 16484-2:2004 Part 2: Hardware
    • ISO 16484-3:2005 Part 3: Functions
    • ISO 16484-5:2017 Part 5: Data communication protocol
    • ISO 16484-6:2014 Part 6: Data communication conformance testing
  • ISO/IEC 16485:2000 Information technology - Mixed Raster Content (MRC)
  • ISO 16495:2013 Packaging - Transport packaging for dangerous goods - Test methods
  • Information technology – Generic digital audio-visual systems
    • ISO/IEC 16500-1:1999 Part 1: System reference models and scenarios
    • ISO/IEC 16500-2:1999 Part 2: System dynamics, scenarios and protocol requirements
    • ISO/IEC 16500-3:1999 Part 3: Contours: Technology domain
    • ISO/IEC 16500-4:1999 Part 4: Lower-layer protocols and physical interfaces
    • ISO/IEC 16500-5:1999 Part 5: High and mid-layer protocols
    • ISO/IEC 16500-6:1999 Part 6: Information representation
    • ISO/IEC 16500-7:1999 Part 7: Basic security tools
    • ISO/IEC 16500-8:1999 Part 8: Management architecture and protocols
    • ISO/IEC 16500-9:1999 Part 9: Usage information protocols
  • ISO/IEC TR 16501:1999 Information technology - Generic digital audio-visual systems - Technical Report on ISO/IEC 16500 - Description of digital audio-visual functionalities
  • ISO/IEC 16504:2011 Information technology – Telecommunications and information exchange between systems – MAC and PHY for operation in TV white space
  • ISO/IEC 16509:1999 Information technology - Year 2000 terminology
  • ISO/IEC 16512 Information technology – Relayed multicast protocol
    • ISO/IEC 16512-1:2016 Information technology – Relayed Multicast Control Protocol (RMCP) – Framework
    • ISO/IEC 16512-2:2016 Information technology – Relayed multicast protocol: Specification for simplex group applications
  • ISO/IEC 16513:2005 Information technology – Group management protocol
  • ISO/HL7 16527:2016 Health informatics – HL7 Personal Health Record System Functional Model, Release 1 (PHRS FM)
  • ISO 16548:2012 Ships and marine technology - Ship design - General guidance on emergency towing procedures
  • Textiles – Unevenness of textile strands – Capacitance method
  • ISO/TS 16550:2014 Nanotechnologies – Determination of silver nanoparticles potency by release of muramic acid from Staphylococcus aureus
  • ISO 16559:2014 Solid biofuels – Terminology, definitions and descriptions
  • ISO 16571:2014 Systems for evacuation of plume generated by medical devices
  • ISO 16587:2004 Mechanical vibration and shock – Performance parameters for condition monitoring of structures
  • ISO 16589 Rotary shaft lip-type seals incorporating thermoplastic sealing elements
    • ISO 16589-2:2011 Part 2: Vocabulary
  • ISO 16609:2012 Financial services – Requirements for message authentication using symmetric techniques
  • ISO 16610 Geometrical product specifications (GPS) – Filtration
  • ISO 16612 Graphic technology - Variable printing data exchange
    • ISO 16612-1:2005 Part 1: Using PPML 2.1 and PDF 1.4 (PPML/VDX-2005)
    • ISO 16612-2:2010 Part 2: Using PDF/X-4 and PDF/X-5 (PDF/VT-1 and PDF/VT-2)
  • ISO 16613 Graphic technology - Variable content replacement
    • ISO 16613-1:2017 Part 1: Using PDF/X for variable content replacement (PDF/VCR-1)
  • ISO 16622:2002 Meteorology – Sonic anemometers/thermometers – Acceptance test methods for mean wind measurements
  • ISO 16628:2008 Tracheobronchial tubes – Sizing and marking
  • ISO 16638 Radiological protection - Monitoring and internal dosimetry for specific materials
    • ISO 16638-1:2015 Part 1: Inhalation of uranium compounds
  • ISO 16641:2014 Measurement of radioactivity in the environment - Air - Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors
  • ISO 16642:2003 Computer applications in terminology - Terminological markup framework
  • ISO 16649 Microbiology of the food chain – Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli[Note 3]
    • ISO 16649-1:2001 Part 1: Colony-count technique at 44 degrees C using membranes and 5-bromo-4-chloro-3-indolyl beta-D-glucuronide
    • ISO 16649-2:2001 Part 2: Colony-count technique at 44 degrees C using 5-bromo-4-chloro-3-indolyl beta-D-glucuronide
    • ISO 16649-3:2015 Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-ß-D-glucuronide
  • ISO 16654:2001 Microbiology of food and animal feeding stuffs – Horizontal method for the detection of Escherichia coli O157
  • ISO 16671:2015 Ophthalmic implants – Irrigating solutions for ophthalmic surgery
  • ISO 16672:2015 Ophthalmic implants – Ocular endotamponades
  • ISO 16682:2015 Aerospace series – Terminology for clamping devices
  • ISO 16684 Graphic technology - Extensible metadata platform (XMP) specification
    • ISO 16684-1:2012 Part 1: Data model, serialization and core properties
    • ISO 16684-2:2014 Part 2: Description of XMP schemas using RELAX NG
  • ISO/TR 16705:2016 Statistical methods for implementation of Six Sigma - Selected illustrations of contingency table analysis
  • ISO 16706:2016 Ships and marine technology - Marine evacuation systems - Load calculations and testing
  • ISO 16707:2016 Ships and marine technology - Marine evacuation systems - Determination of capacity
  • ISO 16750 Road vehicles – Environmental conditions and testing for electrical and electronic equipment
  • ISO 16760:2014 Graphic technology - Prepress data exchange - Preparation and visualization of RGB images to be used in RGB-based graphics arts workflows
  • ISO/TR 16764:2003 Lifts, escalators and passenger conveyors – Comparison of worldwide standards on electromagnetic interference/electromagnetic compatibility
  • ISO/TS 16785:2014 Electronic Fee Collection (EFC) – Interface definition between DSRC-OBE and external in-vehicle devices
  • ISO/TR 16786:2015 Intelligent transport systems – The use of simulation models for evaluation of traffic management systems – Input parameters and reporting template for simulation of traffic signal control systems
  • ISO 16787:2016 Intelligent transport systems – Assisted Parking System (APS) – Performance requirements and test procedures
  • ISO/TS 16791:2014 Health informatics – Requirements for international machine-readable coding of medicinal product package identifiers
  • ISO 16792:2015 Technical product documentation - Digital product definition data practices
  • ISO 16818:2008 Building environment design – Energy efficiency – Terminology
  • ISO/IEC 16824:1999 Information technology - 120 mm DVD rewritable disk (DVD-RAM)
  • ISO/IEC 16825:1999 Information technology - Case for 120 mm DVD-RAM disks
  • ISO 16832:2006 Acoustics – Loudness scaling by means of categories
  • ISO 16840 Wheelchair seating
    • ISO 16840-1:2006 Part 1: Vocabulary, reference axis convention and measures for body segments, posture and postural support surfaces
  • ISO/TS 16843 Health informatics – Categorial structures for representation of acupuncture
    • ISO/TS 16843-1:2016 Part 1: Acupuncture points
    • ISO/TS 16843-2:2015 Part 2: Needling
  • ISO 16894:2009 Wood-based panels – Oriented strand board (OSB) – Definitions, classification and specifications
  • ISO 16902 Hydraulic fluid power – Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method
    • ISO 16902-1:2003 Part 1: Pumps
  • ISO 16919:2014 Space data and information transfer systems – Requirements for bodies providing audit and certification of candidate trustworthy digital repositories
  • ISO/TS 16949 Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations [Withdrawn: replaced by IATF 16949:2016]
  • ISO/TS 16951:2004 Road vehicles – Ergonomic aspects of transport information and control systems (TICS) – Procedures for determining priority of on-board messages presented to drivers
  • ISO/TS 16955:2016 Prosthetics – Quantification of physical parameters of ankle foot devices and foot units
  • ISO/IEC 16963:2017 Information technology - Digitally recorded media for information interchange and storage - Test method for the estimation of lifetime of optical disks for long-term data storage
  • ISO/IEC 16969:1999 Information technology - Data interchange on 120 mm optical disk cartridges using +RW format - Capacity: 3,0 Gbytes and 6,0 Gbytes
  • ISO 16971:2015 Ophthalmic instruments – Optical coherence tomograph for the posterior segment of the human eye
  • :2002 Ergonomics of human-system interaction – Usability methods supporting human-centred design

ISO 17000 – ISO 17999

  • ISO/IEC 17000:2004 Conformity assessment - Vocabulary and general principles
  • ISO/IEC 17007:2009 Conformity assessment – Guidance for drafting normative documents suitable for use for conformity assessment
  • ISO/IEC 17011:2004 Conformity assessment – General requirements for accreditation bodies accrediting conformity assessment bodies
  • :2012 Conformity assessment—Requirements for the operation of various types of bodies performing inspection
  • :2011 Conformity assessment—Requirements for bodies providing audit and certification of management systems
    • ISO/IEC 17021-1:2015 Part 1: Requirements
    • ISO/IEC 17021-2:2016 Part 2: Competence requirements for auditing and certification of environmental management systems
    • ISO/IEC 17021-3:2017 Part 3: Competence requirements for auditing and certification of quality management systems
    • ISO/IEC TS 17021-4:2013 Part 4: Competence requirements for auditing and certification of event sustainability management systems
    • ISO/IEC TS 17021-5:2014 Part 5: Competence requirements for auditing and certification of asset management systems
    • ISO/IEC TS 17021-6:2014 Part 6: Competence requirements for auditing and certification of business continuity management systems
    • ISO/IEC TS 17021-7:2014 Part 7: Competence requirements for auditing and certification of road traffic safety management systems
    • ISO/IEC TS 17021-9:2016 Part 9: Competence requirements for auditing and certification of anti-bribery management systems
  • :2012 Conformity assessment—Requirements and recommendations for content of a third-party audit report on management systems
  • :2013 Conformity assessment—Guidelines for determining the duration of management system certification audits
  • ISO/IEC 17024:2012 Conformity assessment – General requirements for bodies operating certification of persons
  • ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
  • ISO/IEC TR 17026:2015 Conformity assessment – Example of a certification scheme for tangible products
  • ISO/IEC TS 17027:2014 Conformity assessment – Vocabulary related to competence of persons used for certification of persons
  • ISO/IEC TR 17028:2017 Conformity assessment – Guidelines and examples of a certification scheme for services
  • ISO/IEC 17030:2003 Conformity assessment – General requirements for third-party marks of conformity
  • ISO 17034:2016 General requirements for the competence of reference material producers
  • ISO/IEC 17040:2005 Conformity assessment – General requirements for peer assessment of conformity assessment bodies and accreditation bodies
  • ISO/IEC 17043:2010 Conformity assessment – General requirements for proficiency testing
  • ISO 17049:2013 Accessible design - Application of braille on signage, equipment and appliances
  • ISO/IEC 17050:2004 Conformity assessment — Supplier's declaration of conformity
    • ISO/IEC 17050-1:2004 Part 1: General requirements
    • ISO/IEC 17050-2:2004 Part 2: Supporting documentation
  • :2012 Conformity assessment—Requirements for bodies certifying products, processes and services
  • ISO 17066:2007 Hydraulic tools - Vocabulary
  • ISO/IEC 17067:2013 Conformity assessment – Fundamentals of product certification and guidelines for product certification schemes
  • ISO/TR 17068:2012 Information and documentation - Trusted third party repository for digital records
  • ISO 17075 Leather - Chemical determination of chromium(VI) content in leather
    • ISO 17075-1:2017 Part 1: Colorimetric method
    • ISO 17075-2:2017 Part 2: Chromatographic method
  • ISO 17080:2005 Manually portable agricultural and forestry machines and powered lawn and garden equipment - Design principles for single-panel product safety labels
  • :2012 Specifications for compostable plastics
  • ISO 17089 Measurement of fluid flow in closed conduits – Ultrasonic meters for gas
    • ISO 17089-1:2010 Part 1: Meters for custody transfer and allocation measurement
    • ISO 17089-2:2012 Part 2: Meters for industrial applications
  • ISO 17090 Health informatics – Public key infrastructure
    • ISO 17090-1:2013 Part 1: Overview of digital certificate services
    • ISO 17090-2:2015 Part 2: Certificate profile
    • ISO 17090-3:2008 Part 3: Policy management of certification authority
    • ISO 17090-4:2014 Part 4: Digital Signatures for healthcare documents
    • ISO 17090-5:2017 Part 5: Authentication using Healthcare PKI credentials
  • ISO/TR 17098:2013 Packaging material recycling - Report on substances and materials which may impede recycling
  • ISO 17100:2015 Translation services—Requirements for translation services
  • ISO 17115:2007 Health informatics - Vocabulary of compositional terminological systems
  • ISO/TS 17117:2002 Health informatics - Controlled health terminology - Structure and high-level indicators
  • ISO/TR 17119:2005 Health informatics – Health informatics profiling framework
  • ISO 17123 Optics and optical instruments – Field procedures for testing geodetic and surveying instruments
    • ISO 17123-1:2014 Part 1: Theory
    • ISO 17123-2:2001 Part 2: Levels
    • ISO 17123-3:2001 Part 3: Theodolites
    • ISO 17123-4:2012 Part 4: Electro-optical distance meters (EDM measurements to reflectors)
    • ISO 17123-5:2012 Part 5: Total stations
    • ISO 17123-6:2012 Part 6: Rotating lasers
    • ISO 17123-7:2005 Part 7: Optical plumbing instruments
    • ISO 17123-8:2015 Part 8: GNSS field measurement systems in real-time kinematic (RTK)
  • ISO/TS 17137:2014 Cardiovascular implants and extracorporeal systems – Cardiovascular absorbable implants
  • ISO 17166:1999 Erythema reference action spectrum and standard erythema dose
  • ISO 17185 Intelligent transport systems – Public transport user information
    • ISO 17185-1:2014 Part 1: Standards framework for public information systems
    • ISO/TR 17185-2:2015 Part 2: Public transport data and interface standards catalogue and cross references
    • ISO/TR 17185-3:2015 Part 3: Use cases for journey planning systems and their interoperation
  • ISO/TS 17187:2013 Intelligent transport systems – Electronic information exchange to facilitate the movement of freight and its intermodal transfer – Governance rules to sustain electronic information exchange methods
  • ISO/TS 17200:2013 Nanotechnology – Nanoparticles in powder form – Characteristics and measurements
  • ISO 17201 Acoustics – Noise from shooting ranges
    • ISO 17201-1:2005 Part 1: Determination of muzzle blast by measurement
    • ISO 17201-2:2006 Part 2: Estimation of muzzle blast and projectile sound by calculation
    • ISO 17201-3:2010 Part 3: Guidelines for sound propagation calculations
    • ISO 17201-4:2006 Part 4: Prediction of projectile sound
    • ISO 17201-5:2010 Part 5: Noise management
  • Textiles – Determination of twist in single spun yarns – Untwist/retwist method
  • ISO/IEC 17203:2017 Information technology – Open Virtualization Format (OVF) specification
  • ISO 17208 Underwater acoustics – Quantities and procedures for description and measurement of underwater sound from ships
    • ISO 17208-1:2016 Part 1: Requirements for precision measurements in deep water used for comparison purposes
  • ISO 17218:2014 Sterile acupuncture needles for single use
  • ISO/TS 17251:2016 Health informatics – Business requirements for a syntax to exchange structured dose information for medicinal products
  • ISO 17258:2015 Statistical methods - Six Sigma - Basic criteria underlying benchmarking for Six Sigma in organisations
  • ISO 17261:2012 Intelligent transport systems – Automatic vehicle and equipment identification – Intermodal goods transport architecture and terminology
  • ISO 17262:2012 Intelligent transport systems – Automatic vehicle and equipment identification – Numbering and data structures
  • ISO 17263:2012 Intelligent transport systems – Automatic vehicle and equipment identification – System parameters
  • ISO 17264:2009 Intelligent transport systems – Automatic vehicle and equipment identification – Interfaces
  • ISO 17267:2009 Intelligent transport systems – Navigation systems – Application programming interface (API)
  • ISO/TR 17302:2015 Nanotechnologies – Framework for identifying vocabulary development for nanotechnology applications in human healthcare
  • ISO/IEC 17309:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of a circuit mode basic service and the supplementary service user-to-user signalling as a pair of on-demand inter-PINX connections
  • ISO/IEC 17310:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of 64 kbit/s circuit mode connections with 16 kbit/s sub-multiplexing
  • ISO/IEC 17311:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of 64 kbit/s circuit mode connections with 8 kbit/s sub-multiplexing
  • ISO 17316:2015 Information and documentation - International standard link identifier (ISLI)
  • ISO 17338:2009 Ships and marine technology - Drawings for fire protection - Indications of fire rating by divisions for ships and high-speed craft
  • ISO/IEC 17341:2009 Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 4X)
  • ISO/IEC 17342:2004 Information technology - 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD re-recordable disk (DVD-RW)
  • ISO/IEC 17343:2007 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Signalling interworking between QSIG and SIP – Basic services
  • ISO/IEC 17344:2009 Information technology - Data interchange on 120 mm and 80 mm optical disk using +R format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 16X)
  • ISO/IEC 17345:2006 Information technology - Data Interchange on 130 mm Rewritable and Write Once Read Many Ultra Density Optical (UDO) Disk Cartridges - Capacity: 30 Gbytes per Cartridge - First Generation
  • ISO/IEC 17346:2005 Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 1,3 Gbytes per cartridge
  • ISO/TR 17350:2013 Direct Marking on Plastic Returnable Transport Items (RTIs)
  • ISO 17351:2013 Packaging - Braille on packaging for medicinal products
  • ISO 17359:2011 Condition monitoring and diagnostics of machines – General guidelines
  • ISO 17361:2017 Intelligent transport systems – Lane departure warning systems – Performance requirements and test procedures
  • ISO 17363:2013 Supply chain applications of RFID - Freight containers
  • ISO 17364:2013 Supply chain applications of RFID - Returnable transport items (RTIs) and returnable packaging items (RPIs)
  • ISO 17365:2013 Supply chain applications of RFID - Transport units
  • ISO 17366:2013 Supply chain applications of RFID - Product packaging
  • ISO 17367:2013 Supply chain applications of RFID - Product tagging
  • ISO 17369:2013 Statistical data and metadata exchange (SDMX)
  • ISO/TR 17370:2013 Application Guideline on Data Carriers for Supply Chain Management
  • ISO/TR 17384:2008 Intelligent transport systems – Interactive centrally determined route guidance (CDRG) – Air interface message set, contents and format
  • ISO 17387:2008 Intelligent transport systems – Lane change decision aid systems (LCDAS) – Performance requirements and test procedures
  • ISO 17398:2004 Safety colours and safety signs - Classification, performance and durability of safety signs
  • ISO 17410:2001 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of psychrotrophic microorganisms
  • ISO/IEC 17417:2011 Information technology – Telecommunications and information exchange between systems – Short Distance Visible Light Communication (SDVLC)
  • ISO/TS 17419:2014 Intelligent transport systems – Cooperative systems – Classification and management of ITS applications in a global context
  • ISO/TS 17423:2014 Intelligent transport systems – Cooperative systems – ITS application requirements and objectives for selection of communication profiles
  • ISO/TR 17424:2015 Intelligent transport systems – Cooperative systems – State of the art of Local Dynamic Maps concepts
  • ISO/TS 17425:2016 Intelligent transport systems – Cooperative systems – Data exchange specification for in-vehicle presentation of external road and traffic related data
  • ISO/TS 17426:2016 Intelligent transport systems – Cooperative systems – Contextual speeds
  • ISO 17427 Intelligent transport systems – Cooperative ITS[Note 3]
    • ISO/TS 17427:2014 Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems
    • ISO/TR 17427-2:2015 Part 2: Framework overview
    • ISO/TR 17427-3:2015 Part 3: Concept of operations (ConOps) for 'core' systems
    • ISO/TR 17427-4:2015 Part 4: Minimum system requirements and behaviour for core systems
    • ISO/TR 17427-6:2015 Part 6: 'Core system' risk assessment methodology
    • ISO/TR 17427-7:2015 Part 7: Privacy aspects
    • ISO/TR 17427-8:2015 Part 8: Liability aspects
    • ISO/TR 17427-9:2015 Part 9: Compliance and enforcement aspects
    • ISO/TR 17427-10:2015 Part 10: Driver distraction and information display
  • ISO/TS 17429:2017 Intelligent transport systems – Cooperative ITS – ITS station facilities for the transfer of information between ITS stations
  • ISO 17432:2004 Health informatics – Messages and communication – Web access to DICOM persistent objects
  • ISO 17438 Intelligent transport systems – Indoor navigation for personal and vehicle ITS station
    • ISO 17438-1:2016 Part 1: General information and use case definition
  • ISO/TS 17439:2014 Health informatics – Development of terms and definitions for health informatics glossaries
  • ISO 17442:2012 Financial services - Legal Entity Identifier (LEI)
  • ISO/TS 17444 Electronic fee collection – Charging performance
    • ISO/TS 17444-1:2017 Part 1: Metrics
    • ISO/TS 17444-2:2017 Part 2: Examination framework
  • ISO 17450 Geometrical product specifications (GPS) - General concepts
    • ISO 17450-1:2011 Part 1: Model for geometrical specification and verification
    • ISO 17450-2:2012 Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
    • ISO 17450-3:2016 Part 3: Toleranced features
  • ISO 17451 Packaging - Codification of contents for inventories for shipments of household goods and personal effects
    • ISO 17451-1:2016 Part 1: Numeric codification of inventories
    • ISO/TS 17451-2:2017 Part 2: XML messaging structure for electronic transmission of inventory data
  • ISO/TR 17452:2007 Intelligent transport systems – Using UML for defining and documenting ITS/TICS interfaces
  • ISO/IEC 17462:2000 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-4 format
  • ISO/TR 17465 Intelligent transport systems - Cooperative ITS
    • ISO/TR 17465-1:2014 Part 1: Terms and definitions
    • ISO/TR 17465-2:2015 Part 2: Guidelines for standards documents
    • ISO/TR 17465-3:2015 Part 3: Release procedures for standards documents
  • ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
  • ISO 17468:2016 Microbiology of the food chain – Technical requirements and guidance on establishment or revision of a standardized reference method
  • ISO 17469 Document management - Strategy markup language (StratML)
    • ISO 17469-1:2015 Part 1: StratML core elements
  • ISO 17480:2015 Packaging - Accessible design - Ease of opening
  • ISO 17488:2016 Road vehicles – Transport information and control systems – Detection-response task (DRT) for assessing attentional effects of cognitive load in driving
  • ISO/TS 17503:2015 Statistical methods of uncertainty evaluation - Guidance on evaluation of uncertainty using two-factor crossed designs
  • Industrial automation systems and integration – COLLADA digital asset schema specification for 3D visualization of industrial data
  • ISO 17510:2015 Medical devices – Sleep apnoea breathing therapy – Masks and application accessories
  • ISO 17515 Intelligent transport systems – Communications access for land mobiles (CALM) – Evolved universal terrestrial radio access network (E-UTRAN)
    • ISO 17515-1:2015 Part 1: General usage
  • ISO 17516:2014 Cosmetics – Microbiology – Microbiological limits
  • ISO/TR 17522:2015 Health informatics – Provisions for health applications on mobile/smart devices
  • ISO 17523:2016 Health informatics – Requirements for electronic prescriptions
  • ISO 17526:2003 Optics and optical instruments – Lasers and laser-related equipment – Lifetime of lasers
  • ISO 17532:2007 Stationary equipment for agriculture – Data communications network for livestock farming
  • ISO 17534 Acoustics – Software for the calculation of sound outdoors
    • ISO 17534-1:2015 Part 1: Quality requirements and quality assurance
    • ISO/TR 17534-2:2014 Part 2: General recommendations for test cases and quality assurance interface
    • ISO/TR 17534-3:2015 Part 3: Recommendations for quality assured implementation of ISO 9613-2 in software according to ISO 17534-1
  • ISO/IEC 17549 Information technology – User interface guidelines on menu navigation
    • ISO/IEC 17549-2:2015 Part 2: Navigation with 4-direction devices
  • ISO/IEC 17568:2013 Information technology – Telecommunications and information exchange between systems – Close proximity electric induction wireless communications
  • ISO 17572 Intelligent transport systems (ITS) – Location referencing for geographic databases
    • ISO 17572-1:2015 Part 1: General requirements and conceptual model
    • ISO 17572-2:2015 Part 2: Pre-coded location references (pre-coded profile)
    • ISO 17572-3:2015 Part 3: Dynamic location references (dynamic profile)
  • ISO 17573:2010 Electronic fee collection – Systems architecture for vehicle-related tolling
  • ISO/TS 17574:2017 Electronic fee collection – Guidelines for security protection profiles
  • ISO 17575 Electronic fee collection – Application interface definition for autonomous systems
    • ISO 17575-1:2016 Part 1: Charging
    • ISO 17575-2:2016 Part 2: Communication and connection to the lower layers
    • ISO 17575-3:2016 Part 3: Context data
  • ISO/TS 17582:2014 Quality management systems – Particular requirements for the application of ISO 9001:2008 for electoral organizations at all levels of government
  • ISO/IEC 17592:2004 Information technology - 120 mm (4,7 Gbytes per side) and 80 mm (1,46 Gbytes per side) DVD rewritable disk (DVD-RAM)
  • ISO/IEC 17594:2004 Information technology - Cases for 120 mm and 80 mm DVD-RAM disks
  • ISO 17599:2015 Technical product documentation (TPD) – General requirements of digital mock-up for mechanical products
  • ISO 17604:2015 Microbiology of the food chain – Carcass sampling for microbiological analysis
  • ISO 17631:2002 Ships and marine technology - Shipboard plans for fire protection, life-saving appliances and means of escape
  • ISO 17658:2002 Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology
  • ISO 17659:2002 Welding - Multilingual terms for welded joints with illustrations
  • ISO 17677 Resistance welding - Vocabulary
    • ISO 17677-1:2009 Part 1: Spot, projection and seam welding
  • ISO 17679:2016 Tourism and related services – Wellness spa – Service requirements
  • ISO 17680:2015 Tourism and related services – Thalassotherapy – Service requirements
  • ISO 17687:2007 Transport Information and Control Systems (TICS) – General fleet management and commercial freight operations – Data dictionary and message sets for electronic identification and monitoring of hazardous materials/dangerous goods transportation
  • ISO 17713 Meteorology – Wind measurements
    • ISO 17713-1:2007 Part 1: Wind tunnel test methods for rotating anemometer performance
  • ISO 17714:2007 Meteorology – Air temperature measurements – Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
  • ISO 17717:2017 Meteorological balloons – Specification
  • ISO 17724:2003 Graphical symbols - Vocabulary
  • ISO/TS 17728:2015 Microbiology of the food chain – Sampling techniques for microbiological analysis of food and feed samples
  • ISO 17740 Building construction machinery and equipment – Concrete placing systems for stationary equipment
    • ISO 17740-1:2015 Part 1: Terminology and commercial specifications
  • ISO/IEC 17760 Information technology - AT Attachment[Note 3]
    • ISO/IEC 17760-101:2015 Part 101: ATA/ATAPI Command Set (ATA8-ACS)
    • ISO/IEC 17760-102:2016 Part 102: ATA/ATAPI Command set - 2 (ACS-2)
  • ISO 17772 Energy performance of buildings - Indoor environmental quality
    • ISO 17772-1:2017 Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings
  • Petroleum and natural gas industries – Offshore production installations – Guidelines on tools and techniques for hazard identification and risk assessment
  • ISO/IEC 17788:2014 Information technology - Cloud computing - Overview and vocabulary
  • ISO/IEC 17789:2014 Information technology - Cloud computing - Reference architecture
  • ISO/TR 17791:2013 Health informatics – Guidance on standards for enabling safety in health software
  • ISO 17799 Information technology - Security techniques - Code of Practice for Information Security Management (superseded by ISO/IEC 27002)
  • ISO 17800 Building environment design – Facility Smart Grid Information Model
  • ISO/IEC 17811 Information technology – Device control and management
    • ISO/IEC 17811-1:2014 Part 1: Architecture
    • ISO/IEC 17811-2:2015 Part 2: Specification of Device Control and Management Protocol
    • ISO/IEC 17811-3:2014 Part 3: Specification of Reliable Message Delivery Protocol
  • ISO/IEC 17821:2015 Information technology – Specification of low power wireless mesh network over channel-hopped TDMA links
  • ISO/TS 17822 In vitro diagnostic test systems - Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens
    • ISO/TS 17822-1:2014 Part 1: General requirements, terms and definitions
  • ISO/IEC 17825:2016 Information technology - Security techniques - Testing methods for the mitigation of non-invasive attack classes against cryptographic modules
  • ISO/IEC 17826:2016 Information technology - Cloud Data Management Interface (CDMI)
  • ISO/IEC 17839 Information technology – Identification cards – Biometric System-on-Card[Note 3]
    • ISO/IEC 17839-1:2014 Part 1: Core requirements
    • ISO/IEC 17839-2:2015 Part 2: Physical characteristics
    • ISO/IEC 17839-3:2016 Part 3: Logical information interchange mechanism
  • ISO 17853:2011 Wear of implant materials – Polymer and metal wear particles – Isolation and characterization
  • ISO/TS 17863:2013 Geometrical product specification (GPS) - Tolerancing of moveable assemblies
  • ISO/TS 17865:2016 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
  • ISO/IEC 17875:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Private User Mobility (PUM) – Registration supplementary service
  • ISO/IEC 17876:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol—Private User Mobility (PUM) – Registration supplementary service
  • ISO/IEC 17877:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Private User Mobility (PUM) – Call handling additional network features
  • ISO/IEC 17878:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Private User Mobility (PUM) – Call handling additional network features
  • ISO 17893:2004 Steel wire ropes - Vocabulary, designation and classification
  • :2005 Ships and marine technology – Computer applications – General principles for the development and use of programmable electronic systems in marine applications
  • ISO 17901 Optics and photonics – Holography
    • ISO 17901-1:2015 Part 1: Methods of measuring diffraction efficiency and associated optical characteristics of holograms
    • ISO 17901-2:2015 Part 2: Methods for measurement of hologram recording characteristics
  • ISO 17907:2014 Ships and marine technology - Single point mooring arrangements for conventional tankers
  • ISO/IEC 17913:2000 Information technology – 12,7mm 128-track magnetic tape cartridge for information interchange – Parallel serpentine format
  • ISO/TS 17915:2013 Optics and photonics – Measurement method of semiconductor lasers for sensing
  • ISO/TS 17919:2013 Microbiology of the food chain – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – Detection of botulinum type A, B, E and F neurotoxin-producing clostridia
  • ISO 17933:2000 GEDI - Generic Electronic Document Interchange
  • ISO/TS 17938:2014 Health informatics – Semantic network framework of traditional Chinese medicine language system
  • ISO 17937:2015 Dentistry - Osteotome
  • ISO/TS 17948:2014 Health informatics – Traditional Chinese medicine literature metadata
  • ISO/IEC 17960:2015 Information technology - Programming languages, their environments and system software interfaces - Code signing for source code
  • ISO/IEC TS 17961:2013 Information technology - Programming languages, their environments and system software interfaces - C secure coding rules
  • ISO/IEC 17963:2013 Web Services for Management (WS-Management) Specification
  • ISO/TS 17969:2015 Petroleum, petrochemical and natural gas industries – Guidelines on competency for personnel
  • ISO 17972 Graphic technology - Colour data exchange format (CxF/X)[Note 3]
    • ISO 17972-1:2015 Part 1: Relationship to CxF3 (CxF/X)
    • ISO 17972-2:2016 Part 2: Scanner target data (CxF/X-2)
    • ISO 17972-3:2017 Part 3: Output target data (CxF/X-3)
    • ISO 17972-4:2015 Part 4: Spot colour characterisation data (CxF/X-4)
  • ISO/TS 17975:2015 Health informatics – Principles and data requirements for consent in the Collection, Use or Disclosure of personal health information
  • ISO/IEC 17982:2012 Information technology – Telecommunications and information exchange between systems – Close Capacitive Coupling Communication Physical Layer (CCCC PHY)
  • ISO 17987 Road vehicles – Local Interconnect Network (LIN)
    • ISO 17987-2:2016 Part 2: Transport protocol and network layer services
  • ISO 17994:2014 Water quality – Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
  • ISO 17995:2005 Water quality – Detection and enumeration of thermotolerant Campylobacter species
  • ISO/IEC 17998:2012 Information technology - SOA Governance Framework

ISO 18000 – ISO 18999

  • ISO/IEC 18000 Information technology – Radio frequency identification for item management
  • ISO/IEC 18004:2015 Information technology – Automatic identification and data capture techniques – QR Code bar code symbology specification
  • ISO/IEC 18009:1999 Information technology – Programming languages – Ada: Conformity assessment of a language processor
  • ISO/IEC 18010:2002 Information technology - Pathways and spaces for customer premises cabling
  • ISO/IEC 18012 Information technology - Home Electronic System - Guidelines for product interoperability
    • ISO/IEC 18012-1:2004 Part 1: Introduction
    • ISO/IEC 18012-2:2012 Part 2: Taxonomy and application interoperability model
  • Information technology – Personal identification – ISO-compliant driving license
    • ISO/IEC 18013-1:2005 Part 1: Physical characteristics and basic data set
    • ISO/IEC 18013-2:2008 Part 2: Machine-readable technologies
    • ISO/IEC 18013-3:2017 Part 3: Access control, authentication and integrity validation
    • ISO/IEC 18013-4:2011 Part 4: Test methods
  • ISO/IEC 18014 Information technology – Security techniques – Time-stamping services
  • ISO/IEC TR 18015:2006 Information technology - Programming languages, their environments and system software interfaces - Technical Report on C++ Performance
  • ISO/IEC TR 18016:2003 Information technology – Message Handling Systems (MHS): Interworking with Internet e-mail
  • ISO/IEC 18017:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of Virtual Private Network scenarios
  • ISO/IEC TR 18018:2010 Information technology - Systems and software engineering - Guide for configuration management tool capabilities
  • ISO/IEC 18021:2002 Information technology – User interfaces for mobile tools for management of database communications in a client-server model
  • ISO/IEC 18023 Information technology – SEDRIS
    • ISO/IEC 18023-1:2006 Part 1: Functional specification
    • ISO/IEC 18023-2:2006 Part 2: Abstract transmittal format
    • ISO/IEC 18023-3:2006 Part 3: Transmittal format binary encoding
  • ISO/IEC 18024 Information technology – SEDRIS language bindings
    • :2006 Part 4: C
  • :2005 Information technology – Environmental Data Coding Specification (EDCS)
  • :2009 Information technology – Spatial Reference Model (SRM)
  • ISO/IEC 18031:2011 Information technology - Security techniques - Random bit generation
  • ISO/IEC 18032:2005 Information technology - Security techniques - Prime number generation
  • Information technology – Security techniques – Encryption algorithms
    • ISO/IEC 18033-1:2015 Part 1: General
    • ISO/IEC 18033-2:2006 Part 2: Asymmetric ciphers
    • ISO/IEC 18033-3:2010 Part 3: Block ciphers
    • ISO/IEC 18033-4:2011 Part 4: Stream ciphers
    • ISO/IEC 18033-5:2015 Part 5: Identity-based ciphers
  • ISO/IEC 18035:2003 Information technology – Icon symbols and functions for controlling multimedia software applications
  • ISO/IEC 18036:2003 Information technology - Icon symbols and functions for World Wide Web browser toolbars
  • ISO/IEC TR 18037:2008 Programming languages - C - Extensions to support embedded processors
  • ISO/IEC 18041 Information technology – Computer graphics, image processing and environmental data representation – Environmental Data Coding Specification (EDCS) language bindings
    • :2016 Part 4: C
  • ISO/IEC 18042 Information technology – Computer graphics and image processing – Spatial Reference Model (SRM) language bindings
    • :2006 Part 4: C
  • ISO/IEC 18045:2008 Information technology - Security techniques - Methodology for IT security evaluation
  • ISO/IEC 18046 Information technology - Radio frequency identification device performance test methods
    • ISO/IEC 18046-1:2011 Part 1: Test methods for system performance
    • ISO/IEC 18046-2:2011 Part 2: Test methods for interrogator performance
    • ISO/IEC 18046-3:2012 Part 3: Test methods for tag performance
    • ISO/IEC 18046-4:2015 Part 4: Test methods for performance of RFID gates in libraries
  • ISO/IEC 18047 Information technology - Radio frequency identification device conformance test methods
    • ISO/IEC 18047-2:2012 Part 2: Test methods for air interface communications below 135 kHz
    • ISO/IEC TR 18047-3:2011 Part 3: Test methods for air interface communications at 13,56 MHz
    • ISO/IEC TR 18047-4:2004 Part 4: Test methods for air interface communications at 2,45 GHz
    • ISO/IEC 18047-6:2012 Part 6: Test methods for air interface communications at 860 MHz to 960 MHz
    • ISO/IEC TR 18047-7:2010 Part 7: Test methods for active air interface communications at 433 MHz
  • ISO/IEC 18050:2006 Information technology - Office equipment - Print quality attributes for machine readable Digital Postage Marks
  • ISO/IEC 18051:2012 Information technology – Telecommunications and information exchange between systems – Services for Computer Supported Telecommunications Applications (CSTA) Phase III
  • ISO/IEC 18052:2012 Information technology – Telecommunications and information exchange between systems – ASN.1 for Computer Supported Telecommunications Applications (CSTA) Phase III
  • ISO/IEC TR 18053:2000 Information technology - Telecommunications and information exchange between systems - Glossary of definitions and terminology for Computer Supported Telecommunications Applications (CSTA) Phase III
  • ISO/IEC 18056:2012 Information technology – Telecommunications and information exchange between systems – XML Schema Definitions for Computer Supported Telecommunications Applications (CSTA) Phase III
  • ISO/IEC TR 18057:2004 Information technology – Telecommunications and information exchange between systems – Using ECMA-323 (CSTA XML) in a Voice Browser Environment
  • ISO/TS 18062:2016 Health informatics – Categorial structure for representation of herbal medicaments in terminological systems
  • ISO 18064:2014 Thermoplastic elastomers – Nomenclature and abbreviated terms
  • ISO 18065:2015 Tourism and related services – Tourist services for public use provided by Natural Protected Areas Authorities – Requirements
  • ISO 18082:2014 Anaesthetic and respiratory equipment – Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
  • ISO 18091:2014 Quality management systems – Guidelines for the application of ISO 9001:2008 in local government
  • ISO/IEC 18092:2013 Information technology – Telecommunications and information exchange between systems – Near Field Communication – Interface and Protocol (NFCIP-1)
  • ISO/IEC 18093:1999 Information technology - Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 5,2 Gbytes per cartridge
  • ISO 18104:2014 Health informatics – Categorial structures for representation of nursing diagnoses and nursing actions in terminological systems
  • ISO/TS 18110:2015 Nanotechnologies - Vocabularies for science, technology and innovation indicators
  • ISO 18115 Surface chemical analysis – Vocabulary
    • ISO 18115-1:2013 Part 1: General terms and terms used in spectroscopy
    • ISO 18115-2:2013 Part 2: Terms used in scanning-probe microscopy
  • ISO 18117:2009 Surface chemical analysis – Handling of specimens prior to analysis
  • ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • ISO/IEC TR 18120:2016 Information technology - Learning, education, and training - Requirements for e-textbooks in education
  • ISO/IEC TR 18121:2015 Information technology - Learning, education and training - Virtual experiment framework
  • ISO/TR 18128:2014 Information and documentation - Risk assessment for records processes and systems
  • ISO 18129:2015 Condition monitoring and diagnostics of machines – Approaches for performance diagnosis
  • Ergonomics of human-system interaction – Specification for the process assessment of human-system issues
  • ISO 18158:2016 Workplace air - Terminology
  • ISO/TS 18173:2005 Non-destructive testing - General terms and definitions
  • ISO/IEC 18180:2013 Information technology - Specification for the Extensible Configuration Checklist Description Format (XCCDF) Version 1.2
  • Freight containers – Electronic seals
  • ISO 18189:2016 Ophthalmic optics – Contact lenses and contact lens care products – Cytotoxicity testing of contact lenses in combination with lens care solution to evaluate lens/solution interactions
  • ISO 18190:2016 Anaesthetic and respiratory equipment – General requirements for airways and related equipment
  • ISO 18192 Implants for surgery – Wear of total intervertebral spinal disc prostheses
    • ISO 18192-1:2011 Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test
    • ISO 18192-2:2010 Part 2: Nucleus replacements
    • ISO 18192-3:2017 Part 3: Impingement-wear testing and corresponding environmental conditions for test of lumbar prostheses under adverse kinematic conditions
  • ISO/TR 18196:2016 Nanotechnologies – Measurement technique matrix for the characterization of nano-objects
  • ISO 18215:2015 Ships and marine technology - Vessel machinery operations in polar waters - Guidelines
  • ISO 18232:2006 Health Informatics – Messages and communication – Format of length limited globally unique string identifiers
  • ISO/TS 18234 Intelligent transport systems – Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format
    • ISO/TS 18234-1:2013 Part 1: Introduction, numbering and versions (TPEG1-INV)
    • ISO/TS 18234-2:2013 Part 2: Syntax, semantics and framing structure (TPEG1-SSF)
    • ISO/TS 18234-3:2013 Part 3: Service and network information (TPEG1-SNI)
    • ISO/TS 18234-4:2006 Part 4: Road Traffic Message (RTM) application
    • ISO/TS 18234-5:2006 Part 5: Public Transport Information (PTI) application
    • ISO/TS 18234-6:2006 Part 6: Location referencing applications
    • ISO/TS 18234-7:2013 Part 7: Parking information (TPEG1-PKI)
    • ISO/TS 18234-8:2012 Part 8: Congestion and Travel Time application (TPEG1-CTT)
    • ISO/TS 18234-9:2013 Part 9: Traffic event compact (TPEG1-TEC)
    • ISO/TS 18234-10:2013 Part 10: Conditional access information (TPEG1-CAI)
    • ISO/TS 18234-11:2013 Part 11: Location Referencing Container (TPEG1-LRC)
  • ISO 18241:2016 Cardiovascular implants and extracorporeal systems – Cardiopulmonary bypass systems – Venous bubble traps
  • ISO 18242:2016 Cardiovascular implants and extracorporeal systems – Centrifugal blood pumps
  • ISO 18245:2003 Retail financial services – Merchant category codes
  • ISO 18259:2014 Ophthalmic optics – Contact lens care products – Method to assess contact lens care products with contact lenses in a lens case, challenged with bacterial and fungal organisms
  • ISO/IEC TR 18268:2013 Identification cards – Contactless integrated circuit cards – Proximity cards – Multiple PICCs in a single PCD field
  • ISO 18295 Customer contact centres
    • ISO 18295-1:2017 Part 1: Requirements for customer contact centres
    • ISO 18295-2:2017 Part 2: Requirements for clients using the services of customer contact centres
  • ISO/IEC 18305:2016 Information technology - Real time locating systems - Test and evaluation of localization and tracking systems
  • ISO/TR 18307:2001 Health informatics – Interoperability and compatibility in messaging and communication standards – Key characteristics
  • ISO 18308:2011 Health informatics – Requirements for an electronic health record architecture
  • ISO 18312 Mechanical vibration and shock – Measurement of vibration power flow from machines into connected support structures
    • ISO 18312-1:2012 Part 1: Direct method
    • ISO 18312-2:2012 Part 2: Indirect method
  • ISO/TR 18317:2017 Intelligent transport systems – Pre-emption of ITS communication networks for disaster and emergency communication – Use case scenarios
  • ISO 18322:2017 Space systems – General management requirements for space test centres
  • ISO/IEC 18328 Identification cards – ICC-managed devices
    • ISO/IEC 18328-1:2015 Part 1: General framework
    • ISO/IEC 18328-2:2015 Part 2: Physical characteristics and test methods for cards with devices
    • ISO/IEC 18328-3:2016 Part 3: Organization, security and commands for interchange
  • ISO/TS 18339:2015 Endotherapy devices – Eyepiece cap and light guide connector
  • ISO/TS 18340:2015 Endoscopes – Trocar pins, trocar sleeves and endotherapy devices for use with trocar sleeves
  • ISO/TS 18344:2016 Effectiveness of paper deacidification processes
  • ISO 18365:2013 Hydrometry – Selection, establishment and operation of a gauging station
  • ISO/IEC 18367:2016 Information technology - Security techniques - Cryptographic algorithms and security mechanisms conformance testing
  • ISO 18369 Ophthalmic optics - Contact lenses
    • ISO 18369-1:2017 Part 1: Vocabulary, classification system and recommendations for labelling specifications
    • ISO 18369-2:2017 Part 2: Tolerances
    • ISO 18369-3:2017 Part 3: Measurement methods
    • ISO 18369-4:2017 Part 4: Physicochemical properties of contact lens materials
  • ISO/IEC 18370 Information technology - Security techniques - Blind digital signatures
    • ISO/IEC 18370-1:2016 Part 1: General
    • ISO/IEC 18370-2:2016 Part 2: Discrete logarithm based mechanisms
  • ISO/IEC 18372:2004 Information technology – RapidIOTM interconnect specification
  • ISO/TR 18476:2017 Ophthalmic optics and instruments – Free form technology – Spectacle lenses and measurement
  • ISO/IEC 18384 Information technology - Reference Architecture for Service Oriented Architecture (SOA RA)
    • ISO/IEC 18384-1:2016 Part 1: Terminology and concepts for SOA
    • ISO/IEC 18384-2:2016 Part 2: Reference Architecture for SOA Solutions
    • ISO/IEC 18384-3:2016 Part 3: Service Oriented Architecture ontology
  • ISO 18385:2016 Minimizing the risk of human DNA contamination in products used to collect, store and analyze biological material for forensic purposes – Requirements
  • ISO 18388:2016 Technical product documentation (TPD) – Relief grooves – Types and dimensioning
  • ISO 18391:2016 Geometrical product specifications (GPS) - Population specification
  • ISO/TR 18401:2017 Nanotechnologies - Plain language explanation of selected terms from the ISO/IEC 80004 series
  • ISO 18404:2015 Quantitative methods in process improvement - Six Sigma - Competencies for key personnel and their organizations in relation to Six Sigma and Lean implementation
  • ISO 18405:2017 Underwater acoustics - Terminology
  • ISO 18406:2017 Underwater acoustics – Measurement of radiated underwater sound from percussive pile driving
  • ISO 18414:2006 Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality
  • ISO 18415:2017 Cosmetics – Microbiology – Detection of specified and non-specified microorganisms
  • ISO 18416:2015 Cosmetics – Microbiology – Detection of Candida albicans
  • ISO 18431 Mechanical vibration and shock – Signal processing
    • ISO 18431-1:2005 Part 1: General introduction
    • ISO 18431-2:2004 Part 2: Time domain windows for Fourier Transform analysis
    • ISO 18431-3:2014 Part 3: Methods of time-frequency analysis
    • ISO 18431-4:2007 Part 4: Shock-response spectrum analysis
  • ISO 18434 Condition monitoring and diagnostics of machines – Thermography
    • ISO 18434-1:2008 Part 1: General procedures
  • ISO 18436 Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of personnel
    • ISO 18436-1:2012 Part 1: Requirements for assessment bodies and the assessment process
    • ISO 18436-2:2014 Part 2: Vibration condition monitoring and diagnostics
    • ISO 18436-3:2012 Part 3: Requirements for training bodies and the training process
    • ISO 18436-4:2014 Part 4: Field lubricant analysis
    • ISO 18436-5:2012 Part 5: Lubricant laboratory technician/analyst
    • ISO 18436-6:2014 Part 6: Acoustic emission
    • ISO 18436-7:2014 Part 7: Thermography
    • ISO 18436-8:2013 Part 8: Ultrasound
  • ISO 18437 Mechanical vibration and shock – Characterization of the dynamic mechanical properties of visco-elastic materials
    • ISO 18437-1:2012 Part 1: Principles and guidelines
    • ISO 18437-2:2005 Part 2: Resonance method
    • ISO 18437-3:2005 Part 3: Cantilever shear beam method
    • ISO 18437-4:2008 Part 4: Dynamic stiffness method
    • ISO 18437-5:2011 Part 5: Poisson ratio based on comparison between measurements and finite element analysis
  • ISO/IEC 18450:2013 Information technology - Telecommunications and information exchange between systems - Web Services Description Language (WSDL) for CSTA Phase III
  • ISO 18451 Pigments, dyestuffs and extenders – Terminology
    • ISO 18451-1:2015 Part 1: General terms
  • ISO 18457:2016 Biomimetics – Biomimetic materials, structures and components
  • ISO 18458:2015 Biomimetics – Terminology, concepts and methodology
  • ISO 18459:2015 Biomimetics – Biomimetic structural optimization
  • ISO 18461:2016 International museum statistics
  • ISO 18465:2017 Microbiology of the food chain - Quantitative determination of emetic toxin (cereulide) using LC-MS/MS
  • ISO/IEC 18477 Information technology - Scalable compression and coding of continuous-tone still images
    • ISO/IEC 18477-1:2015 Part 1: Scalable compression and coding of continuous-tone still images
    • ISO/IEC 18477-2:2016 Part 2: Coding of high dynamic range images
    • ISO/IEC 18477-3:2015 Part 3: Box file format
    • ISO/IEC 18477-6:2016 Part 6: IDR Integer Coding
    • ISO/IEC 18477-7:2017 Part 7: HDR Floating-Point Coding
    • ISO/IEC 18477-8:2016 Part 8: Lossless and near-lossless coding
    • ISO/IEC 18477-9:2016 Part 9: Alpha channel coding
  • ISO 18490:2015 Non-destructive testing – Evaluation of vision acuity of NDT personnel
  • ISO 18495 Intelligent transport systems – Commercial freight – Automotive visibility in the distribution supply chain
    • ISO 18495-1:2016 Part 1: Architecture and data definitions
  • ISO/IEC TS 18508:2015 Information technology - Additional Parallel Features in Fortran
  • ISO 18513:2003 Tourism services - Hotels and other types of tourism accommodation - Terminology
  • :2000 Ergonomics – Ergonomics of human-system interaction – Human-centred lifecycle process descriptions
  • ISO/TS 18530:2014 Health Informatics – Automatic identification and data capture marking and labelling – Subject of care and individual provider identification
  • ISO/TR 18532:2009 Guidance on the application of statistical methods to quality and to industrial standardization
  • Road vehicles – Standardized access to automotive repair and maintenance information (RMI)
  • ISO 18542 Road vehicles – Standardized repair and maintenance information (RMI) terminology
    • ISO 18542-1:2012 Part 1: General information and use case definition
    • ISO 18542-2:2014 Part 2: Standardized process implementation requirements, Registration Authority
  • ISO 18562 Biocompatibility evaluation of breathing gas pathways in healthcare applications
    • ISO 18562-1:2017 Part 1: Evaluation and testing within a risk management process
    • ISO 18562-2:2017 Part 2: Tests for emissions of particulate matter
    • ISO 18562-3:2017 Part 3: Tests for emissions of volatile organic compounds (VOCs)
    • ISO 18562-4:2017 Part 4: Tests for leachables in condensate
  • ISO 18564:2016 Machinery for forestry – Noise test code
  • ISO/IEC 18584:2015 Information technology – Identification cards – Conformance test requirements for on-card biometric comparison applications
  • ISO 18587:2017 Translation services - Post-editing of machine translation output - Requirements
  • ISO 18589 Measurement of radioactivity in the environment - Soil
    • ISO 18589-1:2005 Part 1: General guidelines and definitions
    • ISO 18589-2:2015 Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples
    • ISO 18589-3:2015 Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry
    • ISO 18589-4:2009 Part 4: Measurement of plutonium isotopes (plutonium 238 and plutonium 239 + 240) by alpha spectrometry
    • ISO 18589-5:2009 Part 5: Measurement of strontium 90
    • ISO 18589-6:2009 Part 6: Measurement of gross alpha and gross beta activities
    • ISO 18589-7:2013 Part 7: In situ measurement of gamma-emitting radionuclides
  • ISO 18593:2004 Microbiology of food and animal feeding stuffs – Horizontal methods for sampling techniques from surfaces using contact plates and swabs
  • ISO/IEC 18598:2016 Information technology - Automated infrastructure management (AIM) systems - Requirements, data exchange and applications
  • ISO 18600:2015 Textile machinery and accessories – Web roller cards – Terms and definitions
  • ISO 18601:2013 Packaging and the environment - General requirements for the use of ISO standards in the field of packaging and the environment
  • ISO 18602:2013 Packaging and the environment—Optimization of the packaging system
  • ISO 18603:2013 Packaging and the environment—Reuse
  • ISO 18604:2013 Packaging and the environment—Material recycling
  • ISO 18605:2013 Packaging and the environment—Energy recovery
  • ISO 18606:2013 Packaging and the environment—Organic recycling
  • ISO/TS 18614:2016 Packaging - Label material - Required information for ordering and specifying self-adhesive labels
  • ISO 18619:2015 Image technology colour management - Black point compensation
  • ISO 18626:2014 Information and documentation - Interlibrary Loan Transactions
  • ISO 18629 Industrial automation systems and integration – Process specification language
  • ISO/TR 18637:2016 Nanotechnologies – Overview of available frameworks for the development of occupational exposure limits and bands for nano-objects and their aggregates and agglomerates (NOAAs)
  • ISO/TR 18638:2017 Health informatics – Guidance on health information privacy education in healthcare organizations
  • ISO 18649:2004 Mechanical vibration – Evaluation of measurement results from dynamic tests and investigations on bridges
  • ISO 18650 Building construction machinery and equipment – Concrete mixers
    • ISO 18650-1:2004 Part 1: Vocabulary and general specifications
  • ISO/IEC TS 18661 Information technology - Programming languages, their environments, and system software interfaces - Floating-point extensions for C
    • ISO/IEC TS 18661-1:2014 Part 1: Binary floating-point arithmetic
    • ISO/IEC TS 18661-2:2015 Part 2: Decimal floating-point arithmetic
    • ISO/IEC TS 18661-3:2015 Part 3: Interchange and extended types
    • ISO/IEC TS 18661-4:2015 Part 4: Supplementary functions
    • ISO/IEC TS 18661-5:2016 Part 5: Supplementary attributes
  • ISO 18662 Traditional Chinese medicine - Vocabulary
  • ISO 18665:2015 Traditional Chinese medicine – Herbal decoction apparatus
  • ISO 18666:2015 Traditional Chinese medicine – General requirements of moxibustion devices
  • ISO 18682:2016 Intelligent transport systems – External hazard detection and notification systems – Basic requirements
  • ISO 18739:2016 Dentistry - Vocabulary of process chain for CAD/CAM systems
  • ISO 18743:2015 Microbiology of the food chain – Detection of Trichinella larvae in meat by artificial digestion method
  • ISO 18744:2016 Microbiology of the food chain – Detection and enumeration of Cryptosporidium and Giardia in fresh leafy green vegetables and berry fruits
  • ISO/IEC 18745 Information technology – Test methods for machine readable travel documents (MRTD) and associated devices
    • ISO/IEC 18745-1:2014 Part 1: Physical test methods for passport books (durability)
    • ISO/IEC 18745-2:2016 Part 2: Test methods for the contactless interface
  • ISO 18746:2016 Traditional Chinese medicine – Sterile intradermal acupuncture needles for single use
  • ISO/TS 18750:2015 Intelligent transport systems – Cooperative systems – Definition of a global concept for Local Dynamic Maps
  • ISO/PAS 18761:2013 Use and handling of medical devices covered by the scope of ISO/TC 84 – Risk assessment on mucocutaneous blood exposure
  • ISO 18774:2015 Securities and related financial instruments – Financial Instrument Short Name (FISN)
  • ISO 18775:2008 Veneers – Terms and definitions, determination of physical characteristics and tolerances
  • ISO 18777:2005 Transportable liquid oxygen systems for medical use – Particular requirements
  • ISO 18778:2005 Respiratory equipment – Infant monitors – Particular requirements
  • ISO 18788:2015 Management system for private security operations – Requirements with guidance for use
  • ISO/TS 18790 Health informatics – Profiling framework and classification for Traditional Medicine informatics standards development
    • ISO/TS 18790-1:2015 Part 1: Traditional Chinese Medicine
  • ISO/IEC 18809:2000 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording AIT-1 with MIC format
  • ISO/IEC 18810:2001 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording AIT-2 with MIC format
  • ISO 18812:2003 Health informatics – Clinical analyser interfaces to laboratory information systems – Use profiles
  • ISO/IEC TS 18822:2015 Programming languages - C++ - File System Technical Specification
  • ISO/TS 18827:2017 Nanotechnologies – Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials
  • ISO 18829:2017 Document management - Assessing ECM/EDRM implementations - Trustworthiness
  • ISO 18831:2016 Clothing – Digital fittings – Attributes of virtual garments
  • ISO 18835:2015 Inhalational anaesthesia systems – Draw-over anaesthetic systems
  • ISO/IEC 18836:2001 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording – MammothTape-2 format
  • ISO/TR 18845:2017 Dentistry - Test methods for machining accuracy of computer-aided milling machines
  • ISO/TS 18867:2015 Microbiology of the food chain – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis
  • ISO 18875:2015 Coalbed methane exploration and development – Terms and definitions
  • ISO/TS 18876 Industrial automation systems and integration - Integration of industrial data for exchange, access and sharing
    • ISO/TS 18876-1:2003 Part 1: Architecture overview and description
    • ISO/TS 18876-2:2003 Part 2: Integration and mapping methodology
  • ISO 18878:2013 Mobile elevating work platforms – Operator (driver) training
  • ISO/IEC/IEEE 18880:2015 Information technology – Ubiquitous green community control network protocol
  • ISO/IEC/IEEE 18881:2016 Information technology – Ubiquitous green community control network – Control and management
  • ISO/IEC/IEEE 18882:2017 Information technology – Telecommunications and information exchange between systems – Ubiquitous green community control network: Heterogeneous networks convergence and scalability
  • ISO/IEC/IEEE 18883:2016 Information technology – Ubiquitous green community control network – Security
  • ISO 18913:2012 Imaging materials - Permanence - Vocabulary
  • ISO 18921:2008 Imaging materials - Compact discs (CD-ROM) - Method for estimating the life expectancy based on the effects of temperature and relative humidity
  • ISO 18925:2013 Imaging materials - Optical disc media - Storage practices
  • ISO 18926:2012 Imaging materials - Information stored on magneto-optical (MO) discs - Method for estimating the life expectancy based on the effects of temperature and relative humidity
  • ISO 18927:2013 Imaging materials - Recordable compact disc systems - Method for estimating the life expectancy based on the effects of temperature and relative humidity
  • ISO 18933:2012 Imaging materials – Magnetic tape – Care and handling practices for extended usage
  • ISO 18938:2014 Imaging materials - Optical discs - Care and handling for extended storage

ISO 19000 – ISO 19999

  • ISO 19001:2013 In vitro diagnostic medical devices – Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
  • ISO 19005 Document management – Electronic document file format for long-term preservation
  • ISO/TS 19006:2016 Nanotechnologies – 5-(and 6)-Chloromethyl-2’,7’ Dichloro-dihydrofluorescein diacetate (CM-H2DCF-DA) assay for evaluating nanoparticle-induced intracellular reactive oxygen species (ROS) production in RAW 264.7 macrophage cell line
  • ISO 19011:2011 Guidelines for auditing management systems
  • ISO 19017:2015 Guidance for gamma spectrometry measurement of radioactive waste
  • ISO 19018:2004 Ships and marine technology - Terms, abbreviations, graphical symbols and concepts on navigation
  • ISO 19019:2005 Sea-going vessels and marine technology - Instructions for planning, carrying out and reporting sea trials
  • ISO 19020:2017 Microbiology of the food chain – Horizontal method for the immunoenzymatic detection of staphylococcal enterotoxins in foodstuffs
  • ISO/TR 19024:2016 Evaluation of CPB devices relative to their capabilities of reducing the transmission of gaseous microemboli (GME) to a patient during cardiopulmonary bypass
  • ISO 19028:2016 Accessible design - Information contents, figuration and display methods of tactile guide maps
  • ISO/TS 19036:2006 Microbiology of food and animal feeding stuffs – Guidelines for the estimation of measurement uncertainty for quantitative determinations
  • ISO/TR 19038:2005 Banking and related financial services – Triple DEA – Modes of operation – Implementation guidelines
  • ISO 19045:2015 Ophthalmic optics – Contact lens care products – Method for evaluating Acanthamoeba encystment by contact lens care products
  • ISO 19054:2005 Rail systems for supporting medical equipment
  • ISO/TR 19057:2017 Nanotechnologies – Use and application of acellular in vitro tests and methodologies to assess nanomaterial biodurability
  • ISO/IEC 19058:2001 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Generic functional protocol
  • ISO/IEC TR 19075 Information technology - Database languages - SQL Technical Reports
    • ISO/IEC TR 19075-1:2011 Part 1: XQuery Regular Expression Support in SQL
    • ISO/IEC TR 19075-2:2015 Part 2: SQL Support for Time-Related Information
    • ISO/IEC TR 19075-3:2015 Part 3: SQL Embedded in Programs using the JavaTM programming language
    • ISO/IEC TR 19075-4:2015 Part 4: SQL with Routines and types using the JavaTM programming language
    • ISO/IEC TR 19075-5:2016 Part 5: Row Pattern Recognition in SQL
    • ISO/IEC TR 19075-6:2017 Part 6: SQL support for JavaScript Object Notation (JSON)
    • ISO/IEC TR 19075-7:2017 Part 7: Polymorphic table functions in SQL
  • ISO 19079:2016 Intelligent transport systems – Communications access for land mobiles (CALM) – 6LoWPAN networking
  • ISO 19080:2016 Intelligent transport systems – Communications access for land mobiles (CALM) – CoAP facility
  • ISO/TR 19083 Intelligent transport systems – Emergency evacuation and disaster response and recovery
    • ISO/TR 19083-1:2016 Part 1: Framework and concept of operation
  • ISO/IEC 19086 Information technology - Cloud computing - Service level agreement (SLA) framework
    • ISO/IEC 19086-1:2016 Part 1: Overview and concepts
    • ISO/IEC 19086-3:2017 Part 3: Core conformance requirements
  • ISO/TS 19091:2017 Intelligent transport systems – Cooperative ITS – Using V2I and I2V communications for applications related to signalized intersections
  • :2008 Financial services – Biometrics – Security framework
  • ISO/IEC 19099:2014 Information technology - Virtualization Management Specification
  • Geographic information – Reference model
    • ISO 19101-1:2014 Part 1: Fundamentals
    • ISO/TS 19101-2:2008 Part 2: Imagery
  • ISO/TS 19103:2015 Geographic information – Conceptual schema language
  • ISO/TS 19104:2016 Geographic information – Terminology
  • :2000 Geographic information – Conformance and testing
  • :2004 Geographic information – Profiles
  • ISO 19107:2003 Geographic information – Spatial schema
  • ISO 19108:2002 Geographic information – Temporal schema
  • ISO 19109:2015 Geographic information – Rules for application schema
  • ISO 19110:2016 Geographic information – Methodology for feature cataloguing
  • ISO 19111:2007 Geographic information – Spatial referencing by coordinates
    • ISO 19111-2:2009 Part 2: Extension for parametric values
  • ISO 19112:2003 Geographic information – Spatial referencing by geographic identifiers
  • ISO 19113:2002 Geographic information – Quality principles [Withdrawn: replaced by ISO 19157:2013]
  • ISO 19114:2003 Geographic information – Quality evaluation procedures [Withdrawn: replaced by ISO 19157:2013]
  • ISO 19115 Geographic information – Metadata
    • ISO 19115-1:2014 Part 1: Fundamentals
    • ISO 19115-2:2009 Part 2: Extensions for imagery and gridded data
    • ISO/TS 19115-3:2016 Part 3: XML schema implementation for fundamental concepts
  • ISO 19116:2004 Geographic information – Positioning services
  • ISO 19117:2012 Geographic information – Portrayal
  • ISO 19118:2011 Geographic information – Encoding
  • ISO 19119:2016 Geographic information – Services
  • :2001 Geographic information – Functional standards
  • :2000 Geographic information – Imagery and gridded data
  • :2004 Geographic information / Geomatics – Qualification and certification of personnel
  • ISO 19123:2005 Geographic information – Schema for coverage geometry and functions
  • ISO 19125 Geographic information – Simple feature access
  • :2009 Geographic information – Feature concept dictionaries and registers
  • :2005 Geographic information – Geodetic codes and parameters
  • ISO 19128:2005 Geographic information – Web map server interface
  • :2009 Geographic information – Imagery, gridded and coverage data framework
  • :2010 Geographic information – Imagery sensor models for geopositioning
    • ISO/TS 19130-2:2014 Part 2: SAR, InSAR, lidar and sonar
  • :2007 Geographic information – Data product specifications
  • :2007 Geographic information – Location-based services – Reference model
  • :2005 Geographic information – Location-based services – Tracking and navigation
  • :2007 Geographic information – Location-based services – Multimodal routing and navigation
  • Geographic information – Procedures for item registration
    • ISO 19135-1:2015 Part 1: Fundamentals
    • ISO/TS 19135-2:2012 Part 2: XML schema implementation
  • ISO 19136:2007 Geographic information – Geography Markup Language (GML)
    • ISO 19136-2:2015 Part 2: Extended schemas and encoding rules
  • :2007 Geographic information – Core profile of the spatial schema
  • :2006 Geographic information – Data quality measures [Withdrawn: replaced by ISO 19157:2013]
  • :2007 Geographic information – Metadata – XML schema implementation
    • ISO/TS 19139-2:2012 Part 2: Extensions for imagery and gridded data
  • :2008 Geographic information – Schema for moving features
  • ISO 19142:2010 Geographic information – Web Feature Service
  • ISO 19143:2010 Geographic information – Filter encoding
  • Geographic information – Classification systems
    • ISO 19144-1:2009 Part 1: Classification system structure
    • ISO 19144-2:2012 Part 2: Land Cover Meta Language (LCML)
  • ISO 19145:2013 Geographic information – Registry of representations of geographic point location
  • :2010 Geographic information – Cross-domain vocabularies
  • ISO 19147:2015 Geographic information – Transfer Nodes
  • ISO 19148:2012 Geographic information – Linear referencing
  • ISO 19149:2011 Geographic information – Rights expression language for geographic information - GeoREL
  • ISO 19150 Geographic information – Ontology
    • ISO/TS 19150-1:2012 Part 1: Framework
    • ISO 19150-2:2015 Part 2: Rules for developing ontologies in the Web Ontology Language (OWL)
  • ISO 19152:2012 Geographic information – Land Administration Domain Model (LADM)
  • ISO 19153:2014 Geospatial Digital Rights Management Reference Model (GeoDRM RM)
  • ISO 19154:2014 Geographic information – Ubiquitous public access – Reference model
  • ISO 19155:2012 Geographic information – Place Identifier (PI) architecture
    • ISO 19155-2:2017 Part 2: Place Identifier (PI) linking
  • ISO 19156 Geographic information - Observations and measurements
  • ISO 19157:2013 Geographic information – Data quality
    • ISO/TS 19157-2:2016 Part 2: XML schema implementation
  • ISO/TS 19158:2012 Geographic information – Quality assurance of data supply
  • ISO/TS 19159 Geographic information – Calibration and validation of remote sensing imagery sensors and data
    • ISO/TS 19159-1:2014 Part 1: Optical sensors
    • ISO/TS 19159-2:2016 Part 2: Lidar
  • ISO 19160 Addressing
    • ISO 19160-1:2015 Part 1: Conceptual model
  • ISO 19162:2015 Geographic information – Well-known text representation of coordinate reference systems
  • ISO/TS 19163 Geographic information – Content components and encoding rules for imagery and gridded data
    • ISO/TS 19163-1:2016 Part 1: Content model
  • ISO/TR 19201:2013 Mechanical vibration – Methodology for selecting appropriate machinery vibration standards
  • ISO 19204:2017 Soil quality - Procedure for site-specific ecological risk assessment of soil contamination (soil quality TRIAD approach)
  • ISO 19213:2017 Implants for surgery – Test methods of material for use as a cortical bone model
  • ISO/IEC TS 19217:2015 Information technology - Programming languages - C++ Extensions for concepts
  • ISO/TS 19218 Medical devices – Hierarchical coding structure for adverse events
    • ISO/TS 19218-1:2011 Part 1: Event-type codes
    • ISO/TS 19218-2:2012 Part 2: Evaluation codes
  • ISO/TR 19231:2014 Health informatics – Survey of mHealth projects in low and middle income countries (LMIC)
  • ISO 19233 Implants for surgery – Orthopaedic joint prosthesis
    • ISO 19233-1:2017 Part 1: Procedure for producing parametric 3D bone models from CT data of the knee
  • ISO/TR 19234:2016 Hydrometry – Low cost baffle solution to aid fish passage at triangular profile weirs that conform to ISO 4360
  • ISO 19238:2014 Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics
  • ISO/TR 19244:2014 Guidance on transition periods for standards developed by ISO/TC 84 – Devices for administration of medicinal products and catheters
  • ISO 19250:2010 Water quality – Detection of Salmonella spp.
  • ISO/TS 19256:2016 Health informatics – Requirements for medicinal product dictionary systems for health care
  • ISO 19262:2015 Photography - Archiving Systems - Vocabulary
  • ISO/TR 19263 Photography - Archiving systems
    • ISO/TR 19263-1:2017 Part 1: Best practices for digital image capture of cultural heritage material
  • ISO/TS 19264 Photography - Archiving systems - Image quality analysis
    • ISO/TS 19264-1:2017 Part 1: Reflective originals
  • ISO 19289:2015 Air quality – Meteorology – Siting classifications for surface observing stations on land
  • ISO/TS 19299:2015 Electronic fee collection – Security framework
  • ISO/TR 19300:2015 Graphic technology – Guidelines for the use of standards for print media production
  • ISO/TS 19321:2015 Intelligent transport systems – Cooperative ITS – Dictionary of in-vehicle information (IVI) data structures
  • ISO/TS 19337:2016 Nanotechnologies – Characteristics of working suspensions of nano-objects for in vitro assays to evaluate inherent nano-object toxicity
  • ISO 19343:2017 Microbiology of the food chain – Detection and quantification of histamine in fish and fishery products – HPLC method
  • ISO 19361:2017 Measurement of radioactivity - Determination of beta emitters activities - Test method using liquid scintillation counting
  • ISO/IEC 19369:2014 Information technology – Telecommunications and information exchange between systems – NFCIP-2 test methods
  • ISO/IEC 19395:2015 Information technology - Sustainability for and by information technology - Smart data centre resource monitoring and control
  • ISO 19403 Paints and varnishes – Wettability
    • ISO 19403-1:2017 Part 1: Terminology and general principles
    • ISO 19403-2:2017 Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
    • ISO 19403-3:2017 Part 3: Determination of the surface tension of liquids using the pendant drop method
    • ISO 19403-4:2017 Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
    • ISO 19403-5:2017 Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
    • ISO 19403-6:2017 Part 6: Measurement of dynamic contact angle
    • ISO 19403-7:2017 Part 7: Measurement of the contact angle on a tilt stage (roll-off angle)
  • ISO/TS 19408:2015 Footwear – Sizing – Vocabulary and terminology
  • ISO 19439 Enterprise integration – Framework for enterprise modelling
  • Enterprise integration – Constructs for enterprise modelling
  • ISO 19444 Document management - XML Forms Data Format
    • ISO 19444-1:2016 Part 1: Use of ISO 32000-2 (XFDF 3.0)
  • ISO 19445:2016 Graphic technology - Metadata for graphic arts workflow - XMP metadata for image and document proofing
  • ISO/IEC TR 19446:2015 Differences between the driving licences based on the ISO/IEC 18013 series and the European Union specifications
  • ISO/IEC 19459:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Single Step Call Transfer Supplementary Service
  • ISO/IEC 19460:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Single Step Call Transfer supplementary service
  • ISO/IEC 19464:2014 Information technology – Advanced Message Queuing Protocol (AMQP) v1.0 specification
  • ISO 19465:2017 Traditional Chinese medicine - Categories of traditional Chinese medicine (TCM) clinical terminological systems
  • ISO 19467:2017 Thermal performance of windows and doors - Determination of solar heat gain coefficient using solar simulator
  • ISO/CIE 19476:2014 Characterization of the performance of illuminance meters and luminance meters
  • ISO/TR 19480:2005 Polyethylene pipes and fittings for the supply of gaseous fuels or water – Training and assessment of fusion operators
  • ISO 19496 Vitreous and porcelain enamels - Terminology
    • ISO 19496-1:2017 Part 1: Terms and definitions
    • ISO 19496-2:2017 Part 2: Visual representations and descriptions
  • ISO/TR 19498:2015 Ophthalmic optics and instruments – Correlation of optotypes
  • ISO/IEC 19500 Information technology - Object Management Group - Common Object Request Broker Architecture (CORBA)
    • ISO/IEC 19500-1:2012 Part 1: Interfaces
    • ISO/IEC 19500-2:2012 Part 2: Interoperability
    • ISO/IEC 19500-3:2012 Part 3: Components
  • Information technology – Open Distributed Processing – Unified Modeling Language (UML) Version 1.4.2
  • Information technology – Meta Object Facility (MOF)
  • Information technology – XML Metadata Interchange (XMI)
  • ISO/IEC 19505 Information technology - Object Management Group Unified Modeling Language (OMG UML)
    • ISO/IEC 19505-1:2012 Part 1: Infrastructure
    • ISO/IEC 19505-2:2012 Part 2: Superstructure
  • ISO/IEC 19506:2012 Information technology—Object Management Group Architecture-Driven Modernization (ADM) - Knowledge Discovery Meta-Model (KDM)
  • ISO/IEC 19507:2012 Information technology - Object Management Group Object Constraint Language (OCL)
  • ISO/IEC 19508:2014 Information technology - Object Management Group Meta Object Facility (MOF) Core
  • ISO/IEC 19509:2014 Information technology - Object Management Group XML Metadata Interchange (XMI)
  • ISO/IEC 19510:2013 Information technology - Object Management Group Business Process Model and Notation
  • ISO/IEC 19514:2017 Information technology - Object management group systems modeling language (OMG SysML)
  • ISO/IEC TR 19566 Information technology - JPEG Systems
    • ISO/IEC TR 19566-1:2016 Part 1: Packaging of information using codestreams and file formats
    • ISO/IEC TR 19566-2:2016 Part 2: Transport mechanisms and packaging
  • ISO/IEC TS 19568:2017 Programming Languages - C++ Extensions for Library Fundamentals
  • ISO/IEC TS 19570:2015 Programming Languages - Technical Specification for C++ Extensions for Parallelism
  • ISO/IEC TS 19571:2016 Programming Languages - Technical specification for C++ extensions for concurrency
  • ISO/TS 19590:2017 Nanotechnologies – Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
  • ISO/IEC 19592 Information technology - Security techniques - Secret sharing
    • ISO/IEC 19592-1:2016 Part 1: General
  • ISO 19600 Compliance management systems - Guidelines
  • ISO/TR 19601:2017 Nanotechnologies – Aerosol generation for air exposure studies of nano-objects and their aggregates and agglomerates (NOAA)
  • ISO 19611:2017 Traditional Chinese medicine – Air extraction cupping device
  • ISO 19614:2017 Traditional Chinese medicine – Pulse graph force transducer
  • ISO/IEC 19637:2016 Information technology – Sensor network testing framework
  • ISO/TR 19639:2015 Electronic fee collection – Investigation of EFC standards for common payment schemes for multi-modal transport services
  • ISO 19649:2017 Mobile robots - Vocabulary
  • ISO/TR 19664:2017 Human response to vibration – Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety
  • ISO/IEC 19678:2015 Information Technology - BIOS Protection Guidelines
  • ISO 19709 Transport packaging - Small load container systems
    • ISO 19709-1:2016 Part 1: Common requirements and test methods
    • ISO/TS 19709-2:2016 Part 2: Column Stackable System (CSS)
    • ISO/TS 19709-3:2016 Part 3: Bond Stackable System (BSS)
  • ISO/TR 19716:2016 Nanotechnologies – Characterization of cellulose nanocrystals
  • ISO 19719:2010 Machine tools - Work holding chucks - Vocabulary
  • ISO 19720 Building construction machinery and equipment – Plants for the preparation of concrete and mortar
    • ISO 19720-1:2017 Part 1: Terminology and commercial specifications
  • ISO/TR 19727:2017 Medical devices – Pump tube spallation test – General procedure
  • ISO 19731:2017 Digital analytics and web analyses for purposes of market, opinion and social research - Vocabulary and service requirements
  • ISO/IEC 19752 Information technology – Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components
  • ISO/IEC TR 19755:2003 Information technology - Programming languages, their environments and system software interfaces - Object finalization for programming language COBOL
  • ISO/IEC 19756:2011 Information technology - Topic Maps - Constraint Language (TMCL)
  • ISO/IEC 19757 Information technology – Document Schema Definition Languages (DSDL)
    • ISO/IEC 19757-2:2008 Part 2: Regular-grammar-based validation – RELAX NG
    • ISO/IEC 19757-3:2016 Part 3: Rule-based validation – Schematron
    • ISO/IEC 19757-4:2006 Part 4: Namespace-based Validation Dispatching Language (NVDL)
    • ISO/IEC 19757-5:2011 Part 5: Extensible Datatypes
    • ISO/IEC 19757-7:2009 Part 7: Character Repertoire Description Language (CREPDL)
    • ISO/IEC 19757-8:2008 Part 8: Document Semantics Renaming Language (DSRL)
    • ISO/IEC 19757-11:2011 Part 11: Schema association
  • ISO/IEC TR 19758:2003 Information technology - Document description and processing languages - DSSSL library for complex compositions
  • ISO/IEC TR 19759:2015 Software Engineering - Guide to the software engineering body of knowledge (SWEBOK)
  • ISO/IEC 19761:2011 Software engineering - : a functional size measurement method
  • ISO/IEC 19762:2016 Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary
  • ISO/IEC 19763 Information technology - Metamodel framework for interoperability (MFI)
    • ISO/IEC 19763-1:2015 Part 1: Framework
    • ISO/IEC 19763-3:2010 Part 3: Metamodel for ontology registration
    • ISO/IEC 19763-5:2015 Part 5: Metamodel for process model registration
    • ISO/IEC 19763-6:2015 Part 6: Registry Summary
    • ISO/IEC 19763-7:2015 Part 7: Metamodel for service model registration
    • ISO/IEC 19763-8:2015 Part 8: Metamodel for role and goal model registration
    • ISO/IEC TR 19763-9:2015 Part 9: On demand model selection
    • ISO/IEC 19763-10:2014 Part 10: Core model and basic mapping
    • ISO/IEC 19763-12:2015 Part 12: Metamodel for information model registration
    • ISO/IEC TS 19763-13:2016 Part 13: Metamodel for form design registration
  • ISO/IEC TR 19764:2005 Information technology – Guidelines, methodology and reference criteria for cultural and linguistic adaptability in information technology products
  • ISO/IEC TR 19768:2007 Information technology - Programming languages - Technical Report on C++ Library Extensions
  • ISO/IEC 19770 Information technology – Software asset management
  • ISO/IEC 19772:2009 Information technology - Security techniques - Authenticated encryption
  • ISO/IEC 19773:2011 Information technology - Metadata Registries (MDR) modules
  • ISO/IEC 19774:2006 Information technology - Computer graphics and image processing - Humanoid Animation (H-Anim)
  • ISO/IEC 19775 Information technology—Computer graphics, image processing and environmental data representation—Extensible 3D (X3D)
    • ISO/IEC 19775-1:2013 Part 1: Architecture and base components
    • ISO/IEC 19775-2:2015 Part 2: Scene access interface (SAI)
  • ISO/IEC 19776 Information technology - Computer graphics, image processing and environmental data representation - Extensible 3D (X3D) encodings
    • ISO/IEC 19776-1:2015 Part 1: Extensible Markup Language (XML) encoding
    • ISO/IEC 19776-2:2015 Part 2: Classic VRML encoding
    • ISO/IEC 19776-3:2015 Part 3: Compressed binary encoding
  • ISO/IEC 19777 Information technology - Computer graphics and image processing - Extensible 3D (X3D) language bindings
    • ISO/IEC 19777-1:2006 Part 1: ECMAScript
    • ISO/IEC 19777-2:2006 Part 2: Java
  • ISO/IEC 19778 Information technology - Learning, education and training - Collaborative technology - Collaborative workplace
    • ISO/IEC 19778-1:2015 Part 1: Collaborative workplace data model
    • ISO/IEC 19778-2:2015 Part 2: Collaborative environment data model
    • ISO/IEC 19778-3:2015 Part 3: Collaborative group data model
  • ISO/IEC 19780 Information technology - Learning, education and training - Collaborative technology - Collaborative learning communication
    • ISO/IEC 19780-1:2015 Part 1: Text-based communication
  • ISO/IEC TR 19782:2006 Information technology - Automatic identification and data capture techniques - Effects of gloss and low substrate opacity on reading of bar code symbols
  • ISO/IEC 19784 Information technology – Biometric application programming interface
    • ISO/IEC 19784-1:2006 Part 1: BioAPI specification
    • ISO/IEC 19784-2:2007 Part 2: Biometric archive function provider interface
    • ISO/IEC 19784-4:2011 Part 4: Biometric sensor function provider interface
  • Information technology – Common Biometric Exchange Formats Framework
    • ISO/IEC 19785-1:2015 Part 1: Data element specification
    • ISO/IEC 19785-2:2006 Part 2: Procedures for the operation of the Biometric Registration Authority
    • ISO/IEC 19785-3:2015 Part 3: Patron format specifications
    • ISO/IEC 19785-4:2010 Part 4: Security block format specifications
  • ISO/IEC 19788 Information technology – Learning, education and training – Metadata for learning resources
  • :2012 Information technology – Security techniques – Security requirements for cryptographic modules
  • ISO/IEC TR 19791:2010 Information technology - Security techniques - Security assessment of operational systems
  • ISO/IEC 19792:2009 Information technology - Security techniques - Security evaluation of biometrics
  • Information technology - Open Distributed Processing—Use of UML for ODP system specifications
  • Information technology – Biometric data interchange formats
    • ISO/IEC 19794-1:2011 Part 1: Framework
    • ISO/IEC 19794-2:2011 Part 2: Finger minutiae data
    • ISO/IEC 19794-3:2006 Part 3: Finger pattern spectral data
    • ISO/IEC 19794-4:2011 Part 4: Finger image data
    • ISO/IEC 19794-5:2011 Part 5: Face image data
    • ISO/IEC 19794-6:2011 Part 6: Iris image data
    • ISO/IEC 19794-7:2014 Part 7: Signature/sign time series data
    • ISO/IEC 19794-8:2011 Part 8: Finger pattern skeletal data
    • ISO/IEC 19794-9:2011 Part 9: Vascular image data
    • ISO/IEC 19794-10:2007 Part 10: Hand geometry silhouette data
    • ISO/IEC 19794-11:2013 Part 11: Signature/sign processed dynamic data
    • ISO/IEC 19794-14:2013 Part 14: DNA data
    • ISO/IEC 19794-15:2017 Part 15: Palm crease image data
  • ISO/IEC 19795 Information technology – Biometric performance testing and reporting
    • ISO/IEC 19795-1:2006 Part 1: Principles and framework
    • ISO/IEC 19795-2:2007 Part 2: Testing methodologies for technology and scenario evaluation
    • ISO/IEC TR 19795-3:2007 Part 3: Modality-specific testing
    • ISO/IEC 19795-4:2008 Part 4: Interoperability performance testing
    • ISO/IEC 19795-5:2011 Part 5: Access control scenario and grading scheme
    • ISO/IEC 19795-6:2012 Part 6: Testing methodologies for operational evaluation
    • ISO/IEC 19795-7:2011 Part 7: Testing of on-card biometric comparison algorithms
  • ISO/IEC 19796 Information technology - Learning, education and training - Quality management, assurance and metrics
    • ISO/IEC 19796-1:2005 Part 1: General approach
    • ISO/IEC 19796-3:2009 Part 3: Reference methods and metrics
  • ISO/TR 19814:2017 Information and documentation - Collections management for archives and libraries
  • ISO/IEC 19831:2015 Cloud Infrastructure Management Interface (CIMI) Model and RESTful HTTP-based Protocol – An Interface for Managing Cloud Infrastructure
  • ISO/TR 19838:2016 Microbiology – Cosmetics – Guidelines for the application of ISO standards on Cosmetic Microbiology
  • ISO/IEC TS 19841:2015 Technical Specification for C++ Extensions for Transactional Memory
  • ISO/TS 19844:2016 Health informatics – Identification of medicinal products – Implementation guidelines for data elements and structures for the unique identification and exchange of regulated information on substances
  • ISO/IEC 19845:2015 Information technology - Universal business language version 2.1 (UBL v2.1)
  • ISO 19859:2016 Gas turbine applications – Requirements for power generation
  • ISO 19891 Ships and marine technology - Specifications for gas detectors intended for use on board ships
    • ISO 19891-1:2017 Part 1: Portable gas detectors for atmosphere testing of enclosed spaces
  • ISO/TR 19948:2016 Earth-moving machinery – Conformity assessment and certification process
  • ISO 19952:2005 Footwear – Vocabulary
  • ISO/TS 19979:2014 Ophthalmic optics – Contact lenses – Hygienic management of multipatient use trial contact lenses
  • ISO 19980:2012 Ophthalmic instruments – Corneal topographers
  • ISO/IEC 19987:2015 Information technology - EPC Information services - Specification
  • ISO/IEC 19988:2015 Information technology - GS1 Core Business Vocabulary (CBV)
  • ISO 19993 Timber structures—Glued laminated timber—Face and edge joint cleavage test

ISO 20000 – ISO 20999

  • ISO/IEC 20000 Information technology – Service management
  • ISO/IEC TR 20002:2012 Information technology – Telecommunications and information exchange between systems – Managed P2P: Framework
  • ISO/IEC TR 20004:2015 Information technology - Security techniques - Refining software vulnerability analysis under ISO/IEC 15408 and ISO/IEC 18045
  • ISO/IEC 20005:2013 Information technology - Sensor networks - Services and interfaces supporting collaborative information processing in intelligent sensor networks
  • ISO/IEC 20006 Information technology for learning, education and training - Information model for competency
    • ISO/IEC 20006-1:2014 Part 1: Competency general framework and information model
    • ISO/IEC 20006-2:2015 Part 2: Proficiency level information model
  • ISO/IEC TR 20007:2014 Information technology - Cultural and linguistic interoperability - Definitions and relationship between symbols, icons, animated icons, pictograms, characters and glyphs
  • ISO/IEC 20008 Information technology - Security techniques - Anonymous digital signatures
    • ISO/IEC 20008-1:2013 Part 1: General
    • ISO/IEC 20008-2:2013 Part 2: Mechanisms using a group public key
  • ISO/IEC 20009 Information technology - Security techniques - Anonymous entity authentication
    • ISO/IEC 20009-1:2013 Part 1: General
    • ISO/IEC 20009-2:2013 Part 2: Mechanisms based on signatures using a group public key
    • ISO/IEC 20009-4:2017 Part 4: Mechanisms based on weak secrets
  • ISO/IEC TS 20013:2015 Information technology for learning, education and training - A reference framework of e-Portfolio information
  • ISO/IEC 20016 Information technology for learning, education and training - Language accessibility and human interface equivalencies (HIEs) in e-learning applications
    • ISO/IEC 20016-1:2014 Part 1: Framework and reference model for semantic interoperability
  • ISO/IEC TR 20017:2011 Information technology - Radio frequency identification for item management - Electromagnetic interference impact of ISO/IEC 18000 interrogator emitters on implantable pacemakers and implantable cardioverter defibrillators
  • ISO 20022 Financial services – UNIversal Financial Industry message scheme
  • ISO/TS 20026:2017 Intelligent transport systems – Cooperative ITS – Test architecture
  • ISO/IEC TS 20027:2015 Biometrics interoperability profiles – Best practices for slap tenprint captures
  • ISO/IEC 20060:2010 Information technology – Open Terminal Architecture (OTA) – Virtual machine
  • ISO/IEC 20061:2001 Information technology – 12,65 mm wide magnetic tape cassette for information interchange – Helical scan recording – DTF-2
  • ISO/IEC 20062:2001 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording – VXA-1 format
  • ISO/PAS 20065:2016 Acoustics – Objective method for assessing the audibility of tones in noise – Engineering method
  • ISO/IEC TS 20071 Information technology – User interface component accessibility
    • ISO/IEC TS 20071-11:2012 Part 11: Guidance for alternative text for images
    • ISO/IEC TS 20071-21:2015 Part 21: Guidance on audio descriptions
    • ISO/IEC TS 20071-25:2017 Part 25: Guidance on the audio presentation of text in videos, including captions, subtitles and other on-screen text
  • :2009 Aerosol drug delivery device design verification—Requirements and test methods
  • ISO/IEC 20113:2004 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Make call request supplementary service
  • ISO/IEC 20114:2004 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network (PISN) – Inter-exchange signalling protocol – Make call request supplementary service
  • ISO/IEC 20115:2004 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Use of QSIG for Message Centre Access (MCA) profile standard
  • ISO/IEC 20116:2004 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Message centre monitoring and mailbox identification supplementary services
  • ISO/IEC 20117:2004 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Message centre monitoring and mailbox identification supplementary services
  • ISO 20121:2012 Event sustainability management systems - Requirements with guidance for use
  • ISO 20128:2006 Milk products – Enumeration of presumptive Lactobacillus acidophilus on a selective medium – Colony-count technique at 37 degrees C
  • ISO 20155:2017 Ships and marine technology - Test method of flow induced in-pipe noise source characteristics for a ship-used pump
  • ISO 20160:2006 Implants for surgery – Metallic materials – Classification of microstructures for alpha+beta titanium alloy bars
  • ISO/IEC 20161:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Use of QSIG at the C reference point between a PINX and an Interconnecting Network
  • ISO/IEC 20162:2001 Information technology - Data interchange on 300 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 30 Gbytes per cartridge
  • ISO/IEC 20243:2015 Information Technology - Open Trusted Technology ProviderTM Standard (O-TTPS) - Mitigating maliciously tainted and counterfeit products
  • ISO/TS 20245:2014 Cross-border trade of second-hand goods
  • ISO/IEC 20246:2017 Software and systems engineering - Work product reviews
  • ISO 20252:2012 Market, opinion and social research — Vocabulary and service requirements
  • ISO 20275:2017 Financial services – Entity legal forms (ELF)
  • ISO/TR 20278:2015 Unwanted reflections from the active and inactive areas of display surfaces visible during use
  • ISO/TS 20282 Usability of consumer products and products for public use
  • ISO 20283 Mechanical vibration - Measurement of vibration on ships
    • ISO 20283-2:2008 Part 2: Measurement of structural vibration
    • ISO 20283-3:2006 Part 3: Pre-installation vibration measurement of shipboard equipment
    • ISO 20283-4:2012 Part 4: Measurement and evaluation of vibration of the ship propulsion machinery
    • ISO 20283-5:2016 Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships
  • ISO 20301:2014 Health informatics – Health cards – General characteristics
  • ISO 20302:2014 Health informatics – Health cards – Numbering system and registration procedure for issuer identifiers
  • ISO 20308:2017 Traditional Chinese medicine – Gua Sha instruments
  • ISO 20361:2015 Liquid pumps and pump units – Noise test code – Grades 2 and 3 of accuracy
  • ISO 20381:2009 Mobile elevating work platforms - Symbols for operator controls and other displays
  • ISO 20400:2017 Sustainable procurement - Guidance
  • ISO/TS 20428:2017 Health informatics – Data elements and their metadata for describing structured clinical genomic sequence information in electronic health records
  • ISO/TS 20440:2016 Health informatics – Identification of medicinal products – Implementation guide for ISO 11239 data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of administration and packaging
  • ISO/TS 20452:2007 Requirements and Logical Data Model for a Physical Storage Format (PSF) and an Application Program Interface (API) and Logical Data Organization for PSF used in Intelligent Transport Systems (ITS) Database Technology
  • ISO 20456:2017 Measurement of fluid flow in closed conduits – Guidance for the use of electromagnetic flowmeters for conductive liquids
  • ISO/TR 20461:2000 Determination of uncertainty for volume measurements made using the gravimetric method
  • ISO/TS 20477:2017 Nanotechnologies - Standard terms and their definition for cellulose nanomaterial
  • ISO 20480 Fine bubble technology – General principles for usage and measurement of fine bubbles
    • ISO 20480-1:2017 Part 1: Terminology
  • ISO 20484:2017 Non-destructive testing - Leak testing - Vocabulary
  • ISO 20498 Traditional Chinese medicine – Computerized tongue image analysis system
    • ISO 20498-2:2017 Part 2: Light environment
  • ISO/TR 20514:2005 Health informatics – Electronic health record – Definition, scope and context
  • ISO 20519:2017 Ships and marine technology - Specification for bunkering of liquefied natural gas fuelled vessels
  • ISO/TR 20526:2017 Account-based ticketing state of the art report
  • ISO/TR 20529 Intelligent transport systems – Framework for green ITS (G-ITS) standards
    • ISO/TR 20529-1:2017 Part 1: General information and use case definitions
  • ISO/TR 20545:2017 Intelligent transport systems – Vehicle/roadway warning and control systems – Report on standardisation for vehicle automated driving systems (RoVAS)/Beyond driver assistance systems
  • ISO/IEC 20563:2001 Information technology - 80 mm (1,23 Gbytes per side) and 120 mm (3,95 Gbytes per side) DVD-recordable disk (DVD-R)
  • ISO/TS 20625:2002 Electronic data interchange for administration, commerce and transport (EDIFACT) – Rules for generation of XML scheme files (XSD) on the basis of EDI(FACT) implementation guidelines
  • ISO/IEC 20648:2016 Information technology - TLS specification for storage systems
  • Road vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access
  • ISO 20669:2017 Non-destructive testing - Pulsed eddy current testing of ferromagnetic metallic components
  • ISO 20700 Guidelines for management consultancy services
  • ISO 20712 Water safety signs and beach safety flags
    • ISO 20712-1:2008 Part 1: Specifications for water safety signs used in workplaces and public areas
    • ISO 20712-2:2007 Part 2: Specifications for beach safety flags - Colour, shape, meaning and performance
    • ISO 20712-3:2014 Part 3: Guidance for use
  • ISO 20725:2004 Textile machinery – Condensers for cotton spinning – Vocabulary and principles of construction
  • ISO 20726:2004 Textile machinery – Hopper feeders for cotton spinning – Vocabulary and principles of construction
  • ISO 20727:2004 Textile machinery – Mixing bale openers for cotton spinning – Vocabulary and principles of construction
  • ISO/IEC 20741:2017 Systems and software engineering - Guideline for the evaluation and selection of software engineering tools
  • ISO 20743:2013 Textiles – Determination of antibacterial activity of textile products
  • ISO/IEC TR 20748 Information technology for learning, education and training - Learning analytics interoperability
    • ISO/IEC TR 20748-1:2016 Part 1: Reference model
    • ISO/IEC TR 20748-2:2017 Part 2: System requirements
  • ISO 20775:2009 Information and documentation - Schema for holdings information
  • ISO 20785 Dosimetry for exposures to cosmic radiation in civilian aircraft
    • ISO 20785-1:2012 Part 1: Conceptual basis for measurements
    • ISO 20785-2:2011 Part 2: Characterization of instrument response
    • ISO 20785-3:2015 Part 3: Measurements at aviation altitudes
  • ISO/IEC 20802 Information technology – Open data protocol (OData) v4.0
    • ISO/IEC 20802-1:2016 Part 1: Core
    • ISO/IEC 20802-2:2016 Part 2: OData JSON Format
  • ISO 20807:2004 Non-destructive testing – Qualification of personnel for limited application of non-destructive testing
  • ISO/TR 20811:2017 Optics and photonics – Lasers and laser-related equipment – Laser-induced molecular contamination testing
  • Petroleum, petrochemical and natural gas industries - Production assurance and reliability management
  • ISO 20816 Mechanical vibration – Measurement and evaluation of machine vibration
    • ISO 20816-1:2016 Part 1: General guidelines
    • ISO 20816-2:2017 Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
  • ISO/TR 20824:2007 Ophthalmic instruments – Background for light hazard specification in ophthalmic instrument standards
  • ISO/TR 20831:2017 Health informatics – Medication management concepts and definitions
  • ISO/TS 20836:2005 Microbiology of food and animal feeding stuffs – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – Performance testing for thermal cyclers
  • ISO 20837:2006 Microbiology of food and animal feeding stuffs – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – Requirements for sample preparation for qualitative detection
  • ISO 20838:2006 Microbiology of food and animal feeding stuffs – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – Requirements for amplification and detection for qualitative methods
  • ISO 20906:2009 Acoustics – Unattended monitoring of aircraft sound in the vicinity of airports
  • ISO/IEC TR 20913:2016 Information technology - Data centres - Guidelines on holistic investigation methodology for data centre key performance indicators
  • ISO/IEC 20919:2016 Information technology – Linear Tape File System (LTFS) Format Specification
  • ISO/IEC 20922:2016 Information technology – Message Queuing Telemetry Transport (MQTT) v3.1.1
  • ISO/IEC 20926:2009 Software and systems engineering - Software measurement - IFPUG functional size measurement method 2009
  • ISO/IEC 20933:2016 Information technology - Distributed Application Platforms and Services (DAPS) - Access Systems
  • Information technology – Procedures for achieving metadata registry content consistency
    • ISO/IEC TR 20943-1:2003 Part 1: Data elements
    • ISO/IEC TR 20943-3:2004 Part 3: Value domains
    • ISO/IEC TR 20943-5:2013 Part 5: Metadata mapping procedure
    • ISO/IEC TR 20943-6:2013 Part 6: Framework for generating ontologies
  • ISO/IEC 20944 Information technology - Metadata Registries Interoperability and Bindings (MDR-IB)
    • ISO/IEC 20944-1:2013 Part 1: Framework, common vocabulary, and common provisions for conformance
    • ISO/IEC 20944-2:2013 Part 2: Coding bindings
    • ISO/IEC 20944-3:2013 Part 3: API bindings
    • ISO/IEC 20944-4:2013 Part 4: Protocol bindings
    • ISO/IEC 20944-5:2013 Part 5: Profiles
  • ISO 20958:2013 Condition monitoring and diagnostics of machine systems – Electrical signature analysis of three-phase induction motors
  • ISO/IEC 20968:2002 Software engineering - Mk II Function Point Analysis - Counting Practices Manual
  • ISO/IEC 20970:2002 Information technology - Programming languages, their environments and system software interfaces - JEFF file format

ISO 21000 – ISO 21999

  • ISO/IEC 21000 Information technology – Multimedia framework (MPEG-21)
  • ISO 21047:2009 Information and documentation - International Standard Text Code (ISTC)
  • ISO 21063:2017 Prosthetics and orthotics – Soft orthoses – Uses, functions, classification and description
  • ISO 21064:2017 Prosthetics and orthotics – Foot orthotics – Uses, functions classification and description
  • ISO 21065:2017 Prosthetics and orthotics – Terms relating to the treatment and rehabilitation of persons having a lower limb amputation
  • ISO 21067 Packaging - Vocabulary
    • ISO 21067-1:2016 Part 1: General terms
    • ISO 21067-2:2015 Part 2: Packaging and the environment terms
  • ISO/TR 21074:2016 Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
  • ISO/TR 21089:2004 Health informatics – Trusted end-to-end information flows
  • ISO 21090:2011 Health informatics – Harmonized data types for information interchange
  • ISO 21091:2013 Health informatics – Directory services for healthcare providers, subjects of care and other entities
  • ISO 21101:2014 Adventure tourism – Safety management systems – Requirements
  • ISO/TR 21102:2013 Adventure tourism – Leaders – Personnel competence
  • ISO 21103:2014 Adventure tourism – Information for participants
  • ISO/IEC 21118:2012 Information technology – Office equipment – Information to be included in specification sheets – Data projectors
  • ISO 21127:2014 Information and documentation - A reference ontology for the interchange of cultural heritage information
  • ISO/TS 21144:2016 Ergonomics of human-system interaction – Electronic paper display – Indoor use
  • ISO 21148:2017 Cosmetics – Microbiology – General instructions for microbiological examination
  • ISO 21149:2017 Cosmetics – Microbiology – Enumeration and detection of aerobic mesophilic bacteria
  • ISO 21150:2015 Cosmetics – Microbiology – Detection of Escherichia coli
  • ISO 21183 Light conveyor belts
    • ISO 21183-2:2005 Part 2: List of equivalent terms
  • ISO 21187:2004 Milk – Quantitative determination of bacteriological quality – Guidance for establishing and verifying a conversion relationship between routine method results and anchor method results
  • ISO 21188:2006 Public key infrastructure for financial services – Practices and policy framework
  • ISO 21210:2012 Intelligent transport systems – Communications access for land mobiles (CALM) – IPv6 Networking
  • ISO 21212:2008 Intelligent transport systems – Communications access for land mobiles (CALM) – 2G Cellular systems
  • ISO 21213:2008 Intelligent transport systems – Communications access for land mobiles (CALM) – 3G Cellular systems
  • ISO 21214:2015 Intelligent transport systems – Communications access for land mobiles (CALM) – Infra-red systems
  • ISO 21215:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – M5
  • ISO 21216:2012 Intelligent transport systems – Communication access for land mobiles (CALM) – Millimetre wave air interface
  • ISO 21217:2014 Intelligent transport systems – Communications access for land mobiles (CALM) – Architecture
  • ISO 21218:2013 Intelligent transport systems – Communications access for land mobiles (CALM) – Access technology support
  • ISO/TS 21219 Intelligent transport systems – Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2)
  • ISO 21247:2005 Combined accept-zero sampling systems and process control procedures for product acceptance
  • ISO 21254 Lasers and laser-related equipment – Test methods for laser-induced damage threshold
    • ISO 21254-1:2011 Part 1: Definitions and general principles
    • ISO 21254-2:2011 Part 2: Threshold determination
    • ISO 21254-3:2011 Part 3: Assurance of laser power (energy) handling capabilities
    • ISO/TR 21254-4:2011 Part 4: Inspection, detection and measurement
  • ISO 21289:2008 Mechanical vibration and shock – Parameters to be specified for the acquisition of vibration data
  • ISO 21298:2017 Health informatics - Functional and structural roles
  • ISO/IEC 21320 Information technology - Document Container File
    • ISO/IEC 21320-1:2015 Part 1: Core
  • ISO/IEC 21407:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Simple dialog supplementary service
  • ISO/IEC 21408:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Simple dialog supplementary service
  • ISO/IEC 21409:2001 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Signalling interworking between QSIG and H.323 – Generic functional protocol for the support of supplementary services
  • ISO/IEC 21410:2001 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Signalling interworking between QSIG and H.323 – Call transfer supplementary services
  • ISO/IEC 21411:2001 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Signalling interworking between QSIG and H.323 – Call diversion supplementary services
  • ISO 21413:2005 Manual methods for the measurement of a groundwater level in a well
  • ISO/TR 21414:2016 Hydrometry – Groundwater – Surface geophysical surveys for hydrogeological purposes
  • ISO 21439:2009 Clinical dosimetry - Beta radiation sources for brachytherapy
  • ISO/IEC/IEEE 21450:2010 Information technology - Smart transducer interface for sensors and actuators - Common functions, communication protocols, and Transducer Electronic Data Sheet (TEDS) formats
  • ISO/IEC/IEEE 21451 Information technology - Smart transducer interface for sensors and actuators
    • ISO/IEC/IEEE 21451-1:2010 Part 1: Network Capable Application Processor (NCAP) information model
    • ISO/IEC/IEEE 21451-2:2010 Part 2: Transducer to microprocessor communication protocols and Transducer Electronic Data Sheet (TEDS) formats
    • ISO/IEC/IEEE 21451-4:2010 Part 4: Mixed-mode communication protocols and Transducer Electronic Data Sheet (TEDS) formats
    • ISO/IEC/IEEE 21451-7:2011 Part 7: Transducer to radio frequency identification (RFID) systems communication protocols and Transducer Electronic Data Sheet (TEDS) formats
  • ISO/IEC 21481:2012 Information technology – Telecommunications and information exchange between systems – Near Field Communication Interface and Protocol -2 (NFCIP-2)
  • ISO 21482:2007 Ionizing-radiation warning – Supplementary symbol
  • ISO 21484:2017 Nuclear Energy - Fuel technology - Determination of the O/M ratio in MOX pellets by the gravimetric method
  • ISO 21485:2013 Textile machinery – Draw frame for cotton spinning – Vocabulary and principles of construction
  • ISO 21500 Guidance on project management
  • ISO 21503:2017 Project, programme and portfolio management – Guidance on programme management
  • ISO 21504:2015 Project, programme and portfolio management – Guidance on portfolio management
  • ISO 21505:2017 Project, programme and portfolio management - Guidance on governance
  • ISO 21527 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of yeasts and moulds
    • ISO 21527-1:2008 Part 1: Colony count technique in products with water activity greater than 0,95
    • ISO 21527-2:2008 Part 2: Colony count technique in products with water activity less than or equal to 0,95
  • ISO 21528 Microbiology of the food chain - Horizontal method for the detection and enumeration of Enterobacteriaceae
    • ISO 21528-1:2017 Part 1: Detection of Enterobacteriaceae
    • ISO 21528-2:2017 Part 2: Colony-count technique
  • ISO 21531:2009 Dentistry - Graphical symbols for dental instruments
  • ISO 21534:2007 Non-active surgical implants – Joint replacement implants – Particular requirements
  • ISO 21535:2007 Non-active surgical implants – Joint replacement implants – Specific requirements for hip-joint replacement implants
  • ISO 21536:2007 Non-active surgical implants – Joint replacement implants – Specific requirements for knee-joint replacement implants
  • ISO/TS 21547:2010 Health informatics – Security requirements for archiving of electronic health records – Principles
  • ISO/TR 21548:2010 Health informatics – Security requirements for archiving of electronic health records – Guidelines
  • ISO 21549 Health informatics – Patient healthcard data
    • ISO 21549-1:2013 Part 1: General structure
    • ISO 21549-2:2014 Part 2: Common objects
    • ISO 21549-3:2014 Part 3: Limited clinical data
    • ISO 21549-4:2014 Part 4: Extended clinical data
    • ISO 21549-5:2015 Part 5: Identification data
    • ISO 21549-6:2008 Part 6: Administrative data
    • ISO 21549-7:2016 Part 7: Medication data
    • ISO 21549-8:2010 Part 8: Links
  • ISO 21567:2004 Microbiology of food and animal feeding stuffs – Horizontal method for the detection of Shigella spp.
  • ISO/TS 21609:2014 Road vehicles – (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment
  • ISO 21649:2006 Needle-free injectors for medical use – Requirements and test methods
  • ISO 21667:2010 Health informatics – Health indicators conceptual framework
  • ISO/TR 21707:2008 Intelligent transport systems – Integrated transport information, management and control – Data quality in ITS systems
  • ISO/TR 21730:2007 Health informatics – Use of mobile wireless communication and computing technology in healthcare facilities – Recommendations for electromagnetic compatibility (management of unintentional electromagnetic interference) with medical devices
  • ISO/HL7 21731:2014 Health informatics – HL7 version 3 – Reference information model – Release 4
  • ISO 21748:2017 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
  • ISO/TS 21749:2005 Measurement uncertainty for metrological applications - Repeated measurements and nested experiments
  • ISO 21807:2004 Microbiology of food and animal feeding stuffs – Determination of water activity
  • ISO/IEC 21827:2008 Information technology - Security techniques - Systems Security Engineering - Capability Maturity Model® (SSE-CMM®)
  • ISO 21849:2006 Aircraft and space - Industrial data - Product identification and traceability
  • ISO 21871:2006 Microbiology of food and animal feeding stuffs – Horizontal method for the determination of low numbers of presumptive Bacillus cereus – Most probable number technique and detection method
  • ISO 21872 Microbiology of the food chain – Horizontal method for the determination of Vibrio spp.
  • ISO/IEC 21888:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Identification and Call Linkage Additional Network Feature
  • ISO/IEC 21889:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Identification and Call Linkage Additional Network Feature
  • ISO/IEC TR 21890:2001 Information technology – Telecommunications and information exchange between systems – Interoperation of PISNs with IP networks
  • ISO/TR 21932:2013 Sustainability in buildings and civil engineering works – A review of terminology
  • ISO 21940 Mechanical vibration - Rotor balancing
    • ISO 21940-2:2017 Part 2: Vocabulary
  • ISO/TR 21941:2017 Financial services – Third-party payment service providers
  • ISO 21969:2009 High-pressure flexible connections for use with medical gas systems
  • ISO 21987:2017 Ophthalmic optics – Mounted spectacle lenses
  • ISO/IEC 21989:2002 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Short message service
  • ISO/IEC 21990:2002 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Short message service
  • ISO/IEC 21991:2002 Information technology – Telecommunications and information exchange between systems – Corporate Telecommunication Networks – Signalling interworking between QSIG and H.323 – Call completion supplementary services
  • ISO/IEC 21992:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the tunnelling of QSIG through IP networks

ISO 22000 – ISO 22999

  • ISO 22000:2005 Food safety management systems – Requirements for any organization in the food chain
  • Prerequisite programmes on food safety
    • ISO/TS 22002-1:2009 Part 1: Food manufacturing
    • ISO/TS 22002-2:2013 Part 2: Catering
    • ISO/TS 22002-3:2011 Part 3: Farming
    • ISO/TS 22002-4:2013 Part 4: Food packaging manufacturing
    • ISO/TS 22002-6:2016 Part 6: Feed and animal food production
  • :2013 Food safety management systems – Requirements for bodies providing audit and certification of food safety management systems
  • :2014 Food safety management systems – Guidance on the application of ISO 22000
  • :2007 Traceability in the feed and food chain – General principles and basic requirements for system design and implementation
  • :2009 Quality management systems - Guidelines for the application of ISO 9001:2008 to crop production)
  • ISO/IEC 22050:2002 Information technology – Data interchange on 12,7 mm, 384-track magnetic tape cartridges – Ultrium-1 format
  • ISO/IEC 22051:2002 Information technology – Data interchange on 12,7 mm, 448-track magnetic tape cartridges – SDLT1 format
  • ISO 22077 Health informatics – Medical waveform format
    • ISO 22077-1:2015 Part 1: Encoding rules
    • ISO/TS 22077-2:2015 Part 2: Electrocardiography
    • ISO/TS 22077-3:2015 Part 3: Long term electrocardiography
  • ISO/IEC 22091:2002 Information technology – Streaming Lossless Data Compression algorithm (SLDC)
  • ISO/IEC 22092:2002 Information technology - Data interchange on 130 mm magneto-optical disk cartridges - Capacity: 9,1 Gbytes per cartridge
  • Industrial automation systems and integration – Physical device control – Dimensional Measuring Interface Standard (DMIS)
  • ISO 22096:2007 Condition monitoring and diagnostics of machines – Acoustic emission
  • ISO/TR 22100 Safety of machinery – Relationship with ISO 12100
    • ISO/TR 22100-3:2016 Part 3: Implementation of ergonomic principles in safety standards
  • ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs – Specific requirements and guidance for proficiency testing by interlaboratory comparison
  • ISO 22118:2011 Microbiology of food and animal feeding stuffs – Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens – Performance characteristics
  • ISO 22119:2011 Microbiology of food and animal feeding stuffs – Real-time polymerase chain reaction (PCR) for the detection of food-borne pathogens – General requirements and definitions
  • ISO 22128:2008 Terminology products and services - Overview and guidance
  • ISO/TR 22134:2007 Practical guidelines for socioterminology
  • ISO/TS 22163:2017 Railway applications – Quality management system – Business management system requirements for rail organizations: ISO 9001:2015 and particular requirements for application in the rail sector
  • ISO 22174:2005 Microbiology of food and animal feeding stuffs – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – General requirements and definitions
  • ISO/TS 22220:2011 Health informatics – Identification of subjects of health care
  • ISO/TR 22221:2006 Health informatics – Good principles and practices for a clinical data warehouse
  • :2005 Personal financial planning—Requirements for personal financial planners
  • ISO 22241 Diesel engines – NOx reduction agent AUS 32
    • ISO 22241-1 Quality requirements
    • ISO 22241-2 Test methods
    • ISO 22241-3 Handling, transportation and storing
  • ISO/IEC TR 22250 Information technology – Document description and processing languages – Regular Language Description for XML (RELAX)
    • ISO/IEC TR 22250-1:2002 RELAX Core
  • ISO 22266 Mechanical vibration – Torsional vibration of rotating machinery
    • ISO 22266-1:2009 Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW
  • ISO 22274:2013 Systems to manage terminology, knowledge and content - Concept-related aspects for developing and internationalizing classification systems
  • ISO 22300:2012 Societal security - Terminology
  • ISO 22301:2012 Societal security – Business continuity management systems – Requirements
  • ISO 22307:2008 Financial services – Privacy impact assessment
  • ISO 22310:2006 Information and documentation - Guidelines for standards drafters for stating records management requirements in standards
  • ISO 22311:2012 Societal security – Video-surveillance – Export interoperability
  • ISO/TR 22312:2011 Societal security – Technological capabilities
  • ISO 22313:2012 Societal security – Business continuity management systems – Guidance
  • ISO 22315:2014 Societal security – Mass evacuation – Guidelines for planning
  • ISO 22316:2017 Security and resilience - Organizational resilience—Principles and attributes
  • ISO/TS 22317:2015 Societal security – Business continuity management systems – Guidelines for business impact analysis (BIA)
  • ISO/TS 22318:2015 Societal security – Business continuity management systems – Guidelines for supply chain continuity
  • ISO 22319:2017 Security and resilience - Community resilience - Guidelines for planning the involvement of spontaneous volunteers
  • ISO 22320:2011 Societal security – Emergency management – Requirements for incident response
  • ISO 22322:2015 Societal security – Emergency management – Guidelines for public warning
  • ISO 22324:2015 Societal security – Emergency management – Guidelines for colour-coded alerts
  • ISO 22325:2016 Security and resilience – Emergency management – Guidelines for capability assessment
  • ISO/TR 22351:2015 Societal security – Emergency management – Message structure for exchange of information
  • ISO 22397:2014 Societal security – Guidelines for establishing partnering arrangements
  • ISO 22398:2013 Societal security – Guidelines for exercises
  • :2007 Societal security – Guideline for incident preparedness and operational continuity management
  • ISO/TR 22411:2008 Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities
  • ISO 22412:2017 Particle size analysis - Dynamic light scattering (DLS)
  • ISO 22413:2010 Transfer sets for pharmaceutical preparations – Requirements and test methods
  • ISO 22432:2011 Geometrical product specifications (GPS) - Features utilized in specification and verification
  • ISO/TS 22475 Geotechnical investigation and testing – Sampling methods and groundwater measurements
    • ISO/TS 22475-3:2007 Part 3: Conformity assessment of enterprises and personnel by third party
  • ISO 22493:2014 Microbeam analysis - Scanning electron microscopy - Vocabulary
  • ISO 22514 Statistical methods in process management - Capability and performance
    • ISO 22514-1:2014 Part 1: General principles and concepts
    • ISO 22514-2:2017 Part 2: Process capability and performance of time-dependent process models
    • ISO 22514-3:2008 Part 3: Machine performance studies for measured data on discrete parts
    • ISO 22514-4:2016 Part 4: Process capability estimates and performance measures
    • ISO 22514-6:2013 Part 6: Process capability statistics for characteristics following a multivariate normal distribution
    • ISO 22514-7:2012 Part 7: Capability of measurement processes
    • ISO 22514-8:2014 Part 8: Machine performance of a multi-state production process
  • ISO 22523:2006 External limb prostheses and external orthoses – Requirements and test methods
  • ISO/IEC 22533:2005 Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 2,3 Gbytes per cartridge
  • ISO/IEC 22534:2005 Information technology – Telecommunications and information exchange between systems – Application session services
  • ISO/IEC 22535:2009 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Tunnelling of QSIG over SIP
  • ISO/IEC 22536:2013 Information technology - Telecommunications and information exchange between systems - Near Field Communication Interface and Protocol (NFCIP-1) - RF interface test methods
  • ISO/IEC 22537:2006 Information technology - ECMAScript for XML (E4X) specification
  • ISO/TR 22588:2005 Optics and photonics – Lasers and laser-related equipment – Measurement and evaluation of absorption-induced effects in laser optical components
  • ISO 22600 Health informatics – Privilege management and access control
    • ISO 22600-1:2014 Part 1: Overview and policy management
    • ISO 22600-2:2014 Part 2: Formal models
    • ISO 22600-3:2014 Part 3: Implementations
  • ISO 22665:2012 Ophthalmic optics and instruments – Instruments to measure axial distances in the eye
  • ISO 22675:2016 Prosthetics – Testing of ankle-foot devices and foot units – Requirements and test methods
  • ISO/TR 22676:2006 Prosthetics – Testing of ankle-foot devices and foot units – Guidance on the application of the test loading conditions of ISO 22675 and on the design of appropriate test equipment
  • :2007 Cosmetics – Good Manufacturing Practices (GMP) – Guidelines on Good Manufacturing Practices
  • ISO 22717:2015 Cosmetics – Microbiology – Detection of Pseudomonas aeruginosa
  • ISO 22718:2015 Cosmetics – Microbiology – Detection of Staphylococcus aureus
  • ISO 22727:2007 Graphical symbols - Creation and design of public information symbols - Requirements
  • ISO 22742:2010 Packaging - Linear bar code and two-dimensional symbols for product packaging
  • ISO 22745 Industrial automation systems and integration - Open technical dictionaries and their application to master data
    • ISO 22745-2:2010 Part 2: Vocabulary
  • ISO/IEC TR 22767:2005 Information technology – Telecommunications and information exchange between systems – Using CSTA for SIP phone user agents (uaCSTA)
  • ISO/TS 22789:2010 Health informatics – Conceptual framework for patient findings and problems in terminologies
  • ISO/TS 22809:2007 Non-destructive testing – Discontinuities in specimens for use in qualification examinations
  • ISO 22829:2017 Resistance welding equipment – Transformers – Integrated transformer-rectifier units for welding guns operating at 1 000 Hz
  • ISO 22837:2009 Vehicle probe data for wide area communications
  • ISO 22839:2013 Intelligent transport systems – Forward vehicle collision mitigation systems – Operation, performance, and verification requirements
  • ISO 22840:2010 Intelligent transport systems – Devices to aid reverse manoeuvres – Extended-range backing aid systems (ERBA)
  • ISO/PAS 22853:2005 Ships and marine technology – Computer applications – Specification of Maritime Safety Markup Language (MSML)
  • ISO 22857:2013 Health informatics – Guidelines on data protection to facilitate trans-border flows of personal health data
  • ISO 22868:2011 Forestry and gardening machinery – Noise test code for portable hand-held machines with internal combustion engine – Engineering method (Grade 2 accuracy)
  • ISO 22870:2016 Point-of-care testing (POCT) – Requirements for quality and competence
  • ISO 22877:2004 Castors and wheels – Vocabulary, symbols and multilingual terminology
  • ISO 22935 Milk and milk products – Sensory analysis
    • ISO 22935-1:2009 Part 1: General guidance for the recruitment, selection, training and monitoring of assessors
  • ISO 22951:2009 Data dictionary and message sets for preemption and prioritization signal systems for emergency and public transport vehicles (PRESTO)
  • ISO 22964:2017 Microbiology of the food chain - Horizontal method for the detection of Cronobacter spp.
  • ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
  • ISO/TR 22979:2017 Ophthalmic implants – Intraocular lenses – Guidance on assessment of the need for clinical investigation of intraocular lens design modifications

ISO 23000 – ISO 23999

  • ISO/IEC 23000 Information technology - Multimedia application format (MPEG-A)
  • Information technology – MPEG systems technologies
    • ISO/IEC 23001-1:2006 Part 1: Binary MPEG format for XML
    • ISO/IEC 23001-2:2008 Part 2: Fragment request units
    • ISO/IEC 23001-3:2008 Part 3: XML IPMP messages
    • ISO/IEC 23001-4:2017 Part 4: Codec configuration representation
    • ISO/IEC 23001-5:2008 Part 5: Bitstream Syntax Description Language (BSDL)
    • ISO/IEC 23001-7:2016 Part 7: Common encryption in ISO base media file format
    • ISO/IEC 23001-8:2016 Part 8: Coding-independent code points
    • ISO/IEC 23001-9:2016 Part 9: Common encryption of MPEG-2 transport streams
    • ISO/IEC 23001-10:2015 Part 10: Carriage of timed metadata metrics of media in ISO base media file format
    • ISO/IEC 23001-12:2015 Part 12: Sample Variants in the ISO base media file format
  • Information technology – MPEG video technologies
  • ISO/IEC 23003 Information technology – MPEG audio technologies
  • ISO/IEC 23004 Information technology - Multimedia Middleware
    • ISO/IEC 23004-1:2007 Part 1: Architecture
    • ISO/IEC 23004-2:2007 Part 2: Multimedia application programming interface (API)
    • ISO/IEC 23004-3:2007 Part 3: Component model
    • ISO/IEC 23004-4:2007 Part 4: Resource and quality management
    • ISO/IEC 23004-5:2008 Part 5: Component download
    • ISO/IEC 23004-6:2008 Part 6: Fault management
    • ISO/IEC 23004-7:2008 Part 7: System integrity management
    • ISO/IEC 23004-8:2009 Part 8: Reference software
  • ISO/IEC 23005 Information technology - Media context and control
    • ISO/IEC 23005-1:2016 Part 1: Architecture
    • ISO/IEC 23005-2:2016 Part 2: Control information
    • ISO/IEC 23005-3:2016 Part 3: Sensory information
    • ISO/IEC 23005-4:2016 Part 4: Virtual world object characteristics
    • ISO/IEC 23005-5:2016 Part 5: Data formats for interaction devices
    • ISO/IEC 23005-6:2016 Part 6: Common types and tools
    • ISO/IEC 23005-7:2017 Part 7: Conformance and reference software
  • ISO/IEC 23006 Information technology - Multimedia service platform technologies
    • ISO/IEC 23006-1:2013 Part 1: Architecture
    • ISO/IEC 23006-2:2016 Part 2: MPEG extensible middleware (MXM) API
    • ISO/IEC 23006-3:2016 Part 3: Conformance and reference software
    • ISO/IEC 23006-4:2013 Part 4: Elementary services
    • ISO/IEC 23006-5:2013 Part 5: Service aggregation
  • ISO/IEC 23007 Information technology - Rich media user interfaces
    • ISO/IEC 23007-1:2010 Part 1: Widgets
    • ISO/IEC 23007-2:2012 Part 2: Advanced user interaction (AUI) interfaces
    • ISO/IEC 23007-3:2011 Part 3: Conformance and reference software
  • ISO/IEC 23008 Information technology - High efficiency coding and media delivery in heterogeneous environments
  • ISO/IEC 23009 Information technology - Dynamic adaptive streaming over HTTP (DASH)
    • ISO/IEC 23009-1:2014 Part 1: Media presentation description and segment formats
    • ISO/IEC 23009-2:2014 Part 2: Conformance and reference software
    • ISO/IEC TR 23009-3:2015 Part 3: Implementation guidelines
    • ISO/IEC 23009-4:2013 Part 4: Segment encryption and authentication
    • ISO/IEC 23009-5:2017 Part 5: Server and network assisted DASH (SAND)
  • ISO/IEC/IEEE 23026:2015 Systems and software engineering - Engineering and management of websites for systems, software, and services information
  • ISO 23081 Information and documentation - Managing metadata for records[Note 3]
    • ISO 23081-1:2006 Part 1: Principles
    • ISO 23081-2:2009 Part 2: Conceptual and implementation issues
    • ISO/TR 23081-3:2011 Part 3: Self-assessment method
  • ISO/TS 23165:2006 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
  • ISO 23185:2009 Assessment and benchmarking of terminological resources - General concepts, principles and requirements
  • ISO/TR 23211:2009 Hydrometry – Measuring the water level in a well using automated pressure transducer methods
  • ISO/IEC 23270:2006 Information technology – Programming languages – C#
  • ISO/IEC 23271:2012 Information technology – Common Language Infrastructure (CLI)
  • ISO/IEC TR 23272:2011 Information technology - Common Language Infrastructure (CLI) - Information Derived from Partition IV XML File
  • ISO/IEC 23289:2002 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Signalling interworking between QSIG and H.323 – Basic services
  • ISO/IEC 23290:2004 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network (PISN) – Mapping functions for the tunnelling of QSIG through H.323 networks
  • ISO 23317:2014 Implants for surgery – In vitro evaluation for apatite-forming ability of implant materials
  • ISO 23328 Breathing system filters for anaesthetic and respiratory use
    • ISO 23328-1:2003 Part 1: Salt test method to assess filtration performance
    • ISO 23328-2:2002 Part 2: Non-filtration aspects
  • ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1
  • ISO 23500:2014 Guidance for the preparation and quality management of fluids for haemodialysis and related therapies
  • ISO 23539:2005 Photometry - The CIE system of physical photometry
  • ISO 23599:2012 Assistive products for blind and vision-impaired persons - Tactile walking surface indicators
  • ISO 23600:2007 Assistive products for persons with vision impairments and persons with vision and hearing impairments - Acoustic and tactile signals for pedestrian traffic lights
  • ISO 23601:2009 Safety identification - Escape and evacuation plan signs
  • ISO 23603:2005 Standard method of assessing the spectral quality of daylight simulators for visual appraisal and measurement of colour
  • ISO/TR 23605:2009 Technical product specification (TPS) – Application guidance – International model for national implementation
  • ISO/IEC 23651:2003 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording – AIT-3 format
  • ISO 23718:2007 Metallic materials – Mechanical testing – Vocabulary
  • Textiles – Chenille yarns – Test method for the determination of linear density
  • ISO 23747:2015 Anaesthetic and respiratory equipment – Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
  • ISO/TS 23768 Rolling bearings - Parts library
    • ISO/TS 23768-1:2011 Part 1: Reference dictionary for rolling bearings
  • ISO 23771:2015 Textile machinery – Guide to the design of textile machinery for reduction of the noise emissions
  • ISO/TS 23810:2012 Cardiovascular implants and artificial organs – Checklist for preoperative extracorporeal circulation equipment setup
  • ISO 23813:2007 Cranes – Training of appointed persons
  • ISO 23814:2009 Cranes – Competency requirements for crane inspectors
  • ISO 23833:2013 Microbeam analysis – Electron probe microanalysis (EPMA) – Vocabulary
  • ISO 23853:2004 Cranes – Training of slingers and signallers
  • ISO 23907:2012 Sharps injury protection – Requirements and test methods – Sharps containers
  • ISO 23908:2011 Sharps injury protection – Requirements and test methods – Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling
  • ISO/IEC 23912:2005 Information technology - 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD Recordable Disk (DVD-R)
  • ISO/IEC 23915:2005 Information technology – Telecommunications and information exchange between systems – Corporate Telecommunication Networks – Signalling Interworking between QSIG and SIP – Call Diversion
  • ISO/IEC 23916:2005 Information technology – Telecommunications and information exchange between systems – Corporate Telecommunication Networks – Signalling Interworking between QSIG and SIP – Call Transfer
  • ISO/IEC 23917:2005 Information technology – Telecommunications and information exchange between systems – NFCIP-1 – Protocol Test Methods
  • ISO 23950:1998 Information and documentation – Information retrieval (Z39.50) – Application service definition and protocol specification
  • ISO 23953 Refrigerated display cabinets
    • ISO 23953-1:2015 Part 1: Vocabulary
  • ISO/IEC 23988:2007 Information technology - A code of practice for the use of information technology (IT) in the delivery of assessments

ISO 24000 – ISO 24999

  • ISO 24013:2006 Optics and photonics – Lasers and laser-related equipment – Measurement of phase retardation of optical components for polarized laser radiation
  • ISO 24014 Public transport – Interoperable fare management system
    • ISO 24014-1:2015 Part 1: Architecture
    • ISO/TR 24014-2:2013 Part 2: Business practices
    • ISO/TR 24014-3:2013 Part 3: Complementary concepts to Part 1 for multi-application media
  • ISO 24097 Intelligent transport systems – Using web services (machine-machine delivery) for ITS service delivery
    • ISO 24097-1:2017 Part 1: Realization of interoperable web services
    • ISO/TR 24097-2:2015 Part 2: Elaboration of interoperable web services' interfaces
  • ISO/TR 24098:2007 Intelligent transport systems – System architecture, taxonomy and terminology – Procedures for developing ITS deployment plans utilizing ITS system architecture
  • ISO 24099:2011 Navigation data delivery structures and protocols
  • ISO 24100:2010 Intelligent transport systems – Basic principles for personal data protection in probe vehicle information services
  • ISO 24101 Intelligent transport systems – Communications access for land mobiles (CALM) – Application management
    • ISO 24101-1:2008 Part 1: General requirements
    • ISO 24101-2:2010 Part 2: Conformance test
  • ISO 24102 Intelligent transport systems – Communications access for land mobiles (CALM) – ITS station management
    • ISO 24102-1:2013 Part 1: Local management
    • ISO 24102-2:2015 Part 2: Remote management of ITS-SCUs
    • ISO 24102-3:2013 Part 3: Service access points
    • ISO 24102-4:2013 Part 4: Station-internal management communications
    • ISO 24102-5:2013 Part 5: Fast service advertisement protocol (FSAP)
  • ISO 24103:2009 Intelligent transport systems – Communications access for land mobiles (CALM) – Media adapted interface layer (MAIL)
  • ISO 24153:2009 Random sampling and randomization procedures
  • ISO 24155:2016 Hydrometry – Hydrometric data transmission systems – Specification of system requirements
  • ISO 24156 Graphic notations for concept modelling in terminology work and its relationship with UML
    • ISO 24156-1:2014 Part 1: Guidelines for using UML notation in terminology work
  • ISO 24157:2008 Ophthalmic optics and instruments – Reporting aberrations of the human eye
  • ISO 24294:2013 Timber – Round and sawn timber – Vocabulary
  • ISO/TS 24348:2014 Ophthalmic optics – Spectacle frames – Method for the simulation of wear and detection of nickel release from metal and combination spectacle frames
  • ISO 24393:2008 Rolling bearings - Linear motion rolling bearings - Vocabulary
  • ISO 24408:2005 Ships and marine technology - Position-indicating lights for life-saving appliances - Testing, inspection and marking of production units
  • ISO 24409 Ships and marine technology - Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings
    • ISO 24409-1:2010 Part 1: Design principles
    • ISO 24409-2:2014 Part 2: Catalogue
    • ISO 24409-3:2014 Part 3: Code of practice
  • ISO 24497 Non-destructive testing - Metal magnetic memory
    • ISO 24497-1:2007 Part 1: Vocabulary
  • ISO 24502:2010 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light
  • ISO 24503:2011 Ergonomics - Accessible design - Tactile dots and bars on consumer products
  • ISO 24510:2007 Activities relating to drinking water and wastewater services – Guidelines for the assessment and for the improvement of the service to users
  • ISO 24517 Document management - Engineering document format using PDF
    • ISO 24517-1:2008 Part 1: Use of PDF 1.6 (PDF/E-1)
  • ISO 24518:2015 Activities relating to drinking water and wastewater services – Crisis management of water utilities
  • ISO/TS 24520:2017 Service activities relating to drinking water supply systems and wastewater systems – Crisis management – Good practice for technical aspects
  • ISO 24521:2016 Activities relating to drinking water and wastewater services – Guidelines for the management of basic on-site domestic wastewater services
  • ISO 24523:2017 Service activities relating to drinking water supply systems and wastewater systems – Guidelines for benchmarking of water utilities
  • ISO/TR 24529:2008 Intelligent transport systems – Systems architecture – Use of unified modelling language (UML) in ITS International Standards and deliverables
  • ISO/TS 24530 Traffic and Travel Information (TTI) – TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML)
    • ISO/TS 24530-1:2006 Part 1: Introduction, common data types and tpegML
    • ISO/TS 24530-2:2006 Part 2: tpeg-locML
    • ISO/TS 24530-3:2006 Part 3: tpeg-rtmML
    • ISO/TS 24530-4:2006 Part 4: tpeg-ptiML
  • ISO 24531:2013 Intelligent transport systems – System architecture, taxonomy and terminology – Using XML in ITS standards, data registries and data dictionaries
  • ISO/TR 24532:2006 Intelligent transport systems – Systems architecture, taxonomy and terminology – Using CORBA (Common Object Request Broker Architecture) in ITS standards, data registries and data dictionaries
  • ISO/TS 24533:2012 Intelligent transport systems – Electronic information exchange to facilitate the movement of freight and its intermodal transfer – Road transport information exchange methodology
  • ISO 24534 Intelligent transport systems – Automatic vehicle and equipment identification – Electronic registration identification (ERI) for vehicles[Note 3]
    • ISO 24534-1:2010 Part 1: Architecture
    • ISO 24534-2:2010 Part 2: Operational requirements
    • ISO 24534-3:2016 Part 3: Vehicle data
    • ISO 24534-4:2010 Part 4: Secure communications using asymmetrical techniques
    • ISO 24534-5:2011 Part 5: Secure communications using symmetrical techniques
  • ISO 24535:2007 Intelligent transport systems – Automatic vehicle identification – Basic electronic registration identification (Basic ERI)
  • ISO/IEC 24570:2005 Software engineering - NESMA functional size measurement method version 2.1 - Definitions and counting guidelines for the application of Function Point Analysis
  • ISO/TR 24578:2012 Hydrometry – Acoustic Doppler profiler – Method and application for measurement of flow in open channels
  • ISO 24610 Language resource management - Feature structures
    • ISO 24610-1:2006 Part 1: Feature structure representation
    • ISO 24610-2:2011 Part 2: Feature system declaration
  • ISO 24611:2012 Language resource management - Morpho-syntactic annotation framework (MAF)
  • ISO 24612:2012 Language resource management - Linguistic annotation framework (LAF)
  • ISO 24613:2008 Language resource management - Lexical markup framework (LMF)
  • ISO 24614 Language resource management - Word segmentation of written texts
    • ISO 24614-1:2010 Part 1: Basic concepts and general principles
    • ISO 24614-2:2011 Part 2: Word segmentation for Chinese, Japanese and Korean
  • ISO 24615 Language resource management - Syntactic annotation framework (SynAF)
    • ISO 24615-1:2014 Part 1: Syntactic model
  • ISO 24616:2012 Language resources management - Multilingual information framework
  • ISO 24617 Language resource management - Semantic annotation framework (SemAF)
    • ISO 24617-1:2012 Part 1: Time and events (SemAF-Time, ISO-TimeML)
    • ISO 24617-2:2012 Part 2: Dialogue acts
    • ISO 24617-4:2014 Part 4: Semantic roles (SemAF-SR)
    • ISO/TS 24617-5:2014 Part 5: Discourse structure (SemAF-DS)
    • ISO 24617-6:2016 Part 6: Principles of semantic annotation (SemAF Principles)
    • ISO 24617-7:2014 Part 7: Spatial information (ISOspace)
    • ISO 24617-8:2016 Part 8: Semantic relations in discourse, core annotation schema (DR-core)
  • ISO 24619:2011 Language resource management - Persistent identification and sustainable access (PISA)
  • ISO/TS 24620 Language resource management - Controlled natural language (CNL)
    • ISO/TS 24620-1:2015 Part 1: Basic concepts and principles
  • ISO 24622 Language resource management - Component Metadata Infrastructure (CMDI)
    • ISO 24622-1:2015 Part 1: The Component Metadata Model
  • ISO 24624:2016 Language resource management - Transcription of spoken language
  • ISO/IEC 24700:2005 Quality and performance of office equipment that contains reused components
  • ISO/IEC 24702:2006 Information technology - Generic cabling - Industrial premises
  • ISO/IEC 24703:2004 Information technology - Participant Identifiers
  • ISO/IEC TR 24704:2004 Information technology - Customer premises cabling for wireless access points
  • ISO/IEC 24707:2007 Information technology – Common Logic (CL): a framework for a family of logic-based languages
  • ISO/IEC 24708:2008 Information technology – Biometrics – BioAPI Interworking Protocol
  • ISO/IEC 24709 Information technology – Conformance testing for the biometric application programming interface (BioAPI)
    • ISO/IEC 24709-1:2007 Part 1: Methods and procedures
    • ISO/IEC 24709-2:2007 Part 2: Test assertions for biometric service providers
    • ISO/IEC 24709-3:2011 Part 3: Test assertions for BioAPI frameworks
  • ISO/IEC TR 24710:2005 Information technology - Radio frequency identification for item management - Elementary tag licence plate functionality for ISO/IEC 18000 air interface definitions
  • ISO/IEC 24713 Information technology – Biometric profiles for interoperability and data interchange
    • ISO/IEC 24713-1:2008 Part 1: Overview of biometric systems and biometric profiles
    • ISO/IEC 24713-2:2008 Part 2: Physical access control for employees at airports
    • ISO/IEC 24713-3:2009 Part 3: Biometrics-based verification and identification of seafarers
  • ISO/IEC TR 24714 Information technology - Biometrics - Jurisdictional and societal considerations for commercial applications
    • ISO/IEC TR 24714-1:2008 Part 1: General guidance
  • ISO/IEC TR 24715:2006 Information technology - Programming languages, their environments and system software interfaces - Technical Report on the Conflicts between the ISO/IEC 9945 (POSIX) and the Linux Standard Base (ISO/IEC 23360)
  • ISO/IEC TR 24716:2007 Information technology - Programming languages, their environment and system software interfaces - Native COBOL Syntax for XML Support
  • ISO/IEC TR 24717:2009 Information technology - Programming languages, their environments and system software interfaces - Collection classes for programming language COBOL
  • ISO/IEC TR 24718:2005 Information technology - Programming languages - Guide for the use of the Ada Ravenscar Profile in high integrity systems
  • ISO/IEC TR 24720:2008 Information technology - Automatic identification and data capture techniques - Guidelines for direct part marking (DPM)
  • ISO/IEC TR 24722:2015 Information technology – Biometrics – Multimodal and other multibiometric fusion
  • ISO/IEC 24723:2010 Information technology - Automatic identification and data capture techniques - GS1 Composite bar code symbology specification
  • ISO/IEC 24724:2011 Information technology - Automatic identification and data capture techniques - GS1 DataBar bar code symbology specification
  • ISO/IEC 24727 Identification cards – Integrated circuit card programming interfaces
  • ISO/IEC 24728:2006 Information technology - Automatic identification and data capture techniques - MicroPDF417 bar code symbology specification
  • ISO/IEC TR 24729 Information technology - Radio frequency identification for item management - Implementation guidelines
    • ISO/IEC TR 24729-1:2008 Part 1: RFID-enabled labels and packaging supporting ISO/IEC 18000-6C
    • ISO/IEC TR 24729-2:2008 Part 2: Recycling and RFID tags
    • ISO/IEC TR 24729-3:2009 Part 3: Implementation and operation of UHF RFID Interrogator systems in logistics applications
    • ISO/IEC TR 24729-4:2009 Part 4: Tag data security
  • ISO/IEC 24730 Information technology - Real-time locating systems (RTLS)
    • ISO/IEC 24730-1:2014 Part 1: Application programming interface (API)
    • ISO/IEC 24730-2:2012 Part 2: Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol
    • ISO/IEC 24730-5:2010 Part 5: Chirp spread spectrum (CSS) at 2,4 GHz air interface
    • ISO/IEC 24730-21:2012 Part 21: Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol: Transmitters operating with a single spread code and employing a DBPSK data encoding and BPSK spreading scheme
    • ISO/IEC 24730-22:2012 Part 22: Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol: Transmitters operating with multiple spread codes and employing a QPSK data encoding and Walsh offset QPSK (WOQPSK) spreading scheme
    • ISO/IEC 24730-61:2013 Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface
    • ISO/IEC 24730-62:2013 Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface
  • ISO/IEC TR 24731 Information technology - Programming languages, their environments and system software interfaces - Extensions to the C library
    • ISO/IEC TR 24731-1:2007 Part 1: Bounds-checking interfaces
    • ISO/IEC TR 24731-2:2010 Part 2: Dynamic Allocation Functions
  • ISO/IEC TR 24732:2009 Information technology - Programming languages, their environments and system software interfaces - Extension for the programming language C to support decimal floating-point arithmetic
  • ISO/IEC TR 24733:2011 Information technology - Programming languages, their environments and system software interfaces - Extensions for the programming language C++ to support decimal floating-point arithmetic
  • ISO/IEC 24738:2006 Information technology – Icon symbols and functions for multimedia link attributes
  • ISO/IEC 24739 Information technology - AT Attachment with Packet Interface - 7
    • ISO/IEC 24739-1:2009 Part 1: Register Delivered Command Set, Logical Register Set (ATA/ATAPI-7 V1)
    • ISO/IEC 24739-2:2009 Part 2: Parallel transport protocols and physical interconnect (ATA/ATAPI-7)
    • ISO/IEC 24739-3:2010 Part 3: Serial transport protocols and physical interconnect (ATA/ATAPI-7 V3)
  • ISO/IEC 24740:2008 Information technology - Responsive Link (RL)
  • ISO/IEC TR 24741:2007 Information technology – Biometrics tutorial
  • ISO/IEC 24744:2014 Software Engineering – Metamodel for Development Methodologies
  • ISO/IEC 24745:2011 Information technology - Security techniques - Biometric information protection
  • ISO/IEC TR 24746:2005 Information technology - Generic cabling for customer premises - Mid-span DTE power insertion
  • ISO/IEC 24747:2009 Information technology - Programming languages, their environments and system software interfaces - Extensions to the C Library to support mathematical special functions
  • Systems and software engineering - Life cycle management
    • ISO/IEC TS 24748-1:2016 Part 1: Guidelines for life cycle
    • ISO/IEC TR 24748-2:2011 Part 2: Guide to the application of ISO/IEC 15288 (System life cycle processes)
    • ISO/IEC TR 24748-3:2011 Part 3: Guide to the application of ISO/IEC 12207 (Software life cycle processes)
    • ISO/IEC/IEEE 24748-4:2016 Part 4: Systems engineering planning
    • ISO/IEC/IEEE 24748-5:2017 Part 5: Software development planning
    • ISO/IEC TS 24748-6:2016 Part 6: System integration engineering
  • ISO/IEC TR 24750:2007 Information technology - Assessment and mitigation of installed balanced cabling channels in order to support of 10GBASE-T
  • ISO/IEC 24751 Information technology - Individualized adaptability and accessibility in e-learning, education and training
    • ISO/IEC 24751-1:2008 Part 1: Framework and reference model
    • ISO/IEC 24751-2:2008 Part 2: "Access for all" personal needs and preferences for digital delivery
    • ISO/IEC 24751-3:2008 Part 3: "Access for all" digital resource description
  • ISO/IEC 24752 Information technology – User interfaces – Universal remote console
  • ISO/IEC 24753:2011 Information technology - Radio frequency identification (RFID) for item management - Application protocol: encoding and processing rules for sensors and batteries
  • ISO/IEC 24754 Information technology - Document description and processing languages - Minimum requirements for specifying document rendering systems
    • ISO/IEC 24754-1:2008 Part 1: Feature specifications for document rendering systems
    • ISO/IEC TR 24754-2:2011 Part 2: Formatting specifications for document rendering systems
  • ISO/IEC 24755:2007 Information technology - Screen icons and symbols for personal mobile communication devices
  • ISO/IEC 24756:2009 Information technology - Framework for specifying a common access profile (CAP) of needs and capabilities of users, systems, and their environments
  • ISO/IEC 24757:2008 Information technology - Keyboard interaction model - Machine-readable keyboard description
  • ISO/IEC 24759:2017 Information technology - Security techniques - Test requirements for cryptographic modules
  • ISO/IEC 24760 Information technology - Security techniques - A framework for identity management
    • ISO/IEC 24760-1:2011 Part 1: Terminology and concepts
    • ISO/IEC 24760-2:2015 Part 2: Reference architecture and requirements
    • ISO/IEC 24760-3:2016 Part 3: Practice
  • ISO/IEC 24761:2009 Information technology - Security techniques - Authentication context for biometrics
  • :2008 Information technology – Security techniques – Guidelines for information and communications technology disaster recovery services
  • ISO/IEC TR 24763:2011 Information technology - Learning, education and training - Conceptual Reference Model for Competency Information and Related Objects
  • ISO/IEC 24764:2010 Information technology - Generic cabling systems for data centres
  • ISO/IEC/IEEE 24765:2017 Systems and software engineering - Vocabulary
  • ISO/IEC TR 24766:2009 Information technology - Systems and software engineering - Guide for requirements engineering tool capabilities
  • ISO/IEC 24767 Information technology - Home network security
    • ISO/IEC 24767-1:2008 Part 1: Security requirements
    • ISO/IEC 24767-2:2009 Part 2: Internal security services: Secure Communication Protocol for Middleware (SCPM)
  • ISO/IEC 24769 Information technology - Real-time locating systems (RTLS) device conformance test methods
    • ISO/IEC 24769-2:2013 Part 2: Test methods for air interface communication at 2,4 GHz
    • ISO/IEC 24769-5:2012 Part 5: Test methods for chirp spread spectrum (CSS) at 2,4 GHz air interface
    • ISO/IEC 24769-61:2015 Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface
    • ISO/IEC 24769-62:2015 Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface
  • ISO/IEC 24770:2012 Information technology - Real-time locating system (RTLS) device performance test methods - Test methods for air interface communication at 2,4 GHz
    • ISO/IEC 24770-61:2015 Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface
    • ISO/IEC 24770-62:2015 Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface
  • ISO/IEC 24771:2014 Information technology – Telecommunications and information exchange between systems – MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment
  • ISO/IEC TR 24772:2013 Information technology - Programming languages - Guidance to avoiding vulnerabilities in programming languages through language selection and use
  • ISO/IEC 24773:2008 Software engineering - Certification of software engineering professionals - Comparison framework
  • ISO/IEC TR 24774:2010 Systems and software engineering - Life cycle management - Guidelines for process description
  • ISO/IEC 24775 Information technology - Storage management
    • ISO/IEC 24775-1:2014 Part 1: Overview
    • ISO/IEC 24775-2:2014 Part 2: Common Architecture
    • ISO/IEC 24775-3:2014 Part 3: Common Profiles
    • ISO/IEC 24775-4:2014 Part 4: Block Devices
    • ISO/IEC 24775-5:2014 Part 5: File systems
    • ISO/IEC 24775-6:2014 Part 6: Fabric
    • ISO/IEC 24775-7:2014 Part 7: Host Elements
    • ISO/IEC 24775-8:2014 Part 8: Media Libraries
  • ISO/IEC 24778:2008 Information technology - Automatic identification and data capture techniques - Aztec Code bar code symbology specification
  • ISO/IEC 24779 Information technology - Cross-jurisdictional and societal aspects of implementation of biometric technologies - Pictograms, icons and symbols for use with biometric systems
    • ISO/IEC 24779-1:2016 Part 1: General principles
    • ISO/IEC 24779-4:2017 Part 4: Fingerprint applications
    • ISO/IEC 24779-9:2015 Part 9: Vascular applications
  • ISO/IEC TR 24785:2009 Information technology – Taxonomy of cultural and linguistic adaptability user requirements
  • ISO/IEC 24786:2009 Information technology – User interfaces – Accessible user interface for accessibility settings
  • ISO/IEC 24787:2010 Information technology – Identification cards – On-card biometric comparison
  • ISO/IEC 24789 Identification cards – Card service life
    • ISO/IEC 24789-1:2012 Part 1: Application profiles and requirements
    • ISO/IEC 24789-2:2011 Part 2: Methods of evaluation
  • ISO/IEC 24791 Information technology - Radio frequency identification (RFID) for item management - Software system infrastructure
    • ISO/IEC 24791-1:2010 Part 1: Architecture
    • ISO/IEC 24791-2:2011 Part 2: Data management
    • ISO/IEC 24791-3:2014 Part 3: Device management
    • ISO/IEC 24791-5:2012 Part 5: Device interface
  • ISO/IEC 24792:2010 Information technology – Telecommunications and information exchange between systems – Multicast Session Management Protocol (MSMP)
  • ISO/IEC 24793 Information technology – Mobile multicast communications
    • ISO/IEC 24793-1:2010 Framework
    • ISO/IEC 24793-2:2010 Protocol over native IP multicast networks
  • ISO/IEC 24800 Information technology - JPSearch
    • ISO/IEC TR 24800-1:2012 Part 1: System framework and components
    • ISO/IEC 24800-2:2011 Part 2: Registration, identification and management of schema and ontology
    • ISO/IEC 24800-3:2010 Part 3: Query format
    • ISO/IEC 24800-4:2010 Part 4: File format for metadata embedded in image data (JPEG and JPEG 2000)
    • ISO/IEC 24800-5:2011 Part 5: Data interchange format between image repositories
    • ISO/IEC 24800-6:2012 Part 6: Reference software
  • ISO 24801 Recreational diving services – Requirements for the training of recreational scuba divers
    • ISO 24801-1:2014 Part 1: Level 1 – Supervised diver
    • ISO 24801-2:2014 Part 2: Level 2 – Autonomous diver
    • ISO 24801-3:2014 Part 3: Level 3 – Dive leader
  • ISO 24802 Recreational diving services – Requirements for the training of scuba instructors
    • ISO 24802-1:2014 Part 1: Level 1
    • ISO 24802-2:2014 Part 2: Level 2
  • ISO 24803:2017 Recreational diving services – Requirements for recreational diving providers
  • ISO/IEC 24824 Information technology – Generic applications of ASN.1
    • ISO/IEC 24824-1:2007 Fast infoset
    • ISO/IEC 24824-2:2006 Fast Web Services
    • ISO/IEC 24824-3:2008 Fast infoset security
  • ISO/TR 24971:2013 Medical devices – Guidance on the application of ISO 14971
  • ISO 24978:2009 Intelligent transport systems – ITS Safety and emergency messages using any available wireless media – Data registry procedures

ISO 25000 – ISO 25999

  • ISO/IEC 25000:2014 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Guide to SQuaRE
  • ISO/IEC 25001:2014 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Planning and management
  • ISO/IEC 25010:2011 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - System and software quality models
  • ISO/IEC TS 25011:2017 Information technology - Systems and software quality requirements and evaluation (SQuaRE) - Service quality models
  • ISO/IEC 25012:2008 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Data quality model
  • ISO/IEC 25020:2007 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Measurement reference model and guide
  • ISO/IEC 25021:2012 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Quality measure elements
  • ISO/IEC 25022:2016 Systems and software engineering - Systems and software quality requirements and evaluation (SQuaRE) - Measurement of quality in use
  • ISO/IEC 25023:2016 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Measurement of system and software product quality
  • ISO/IEC 25024:2015 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Measurement of data quality
  • ISO/IEC 25030:2007 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Quality requirements
  • ISO/IEC 25040:2011 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Evaluation process
  • ISO/IEC 25041:2012 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Evaluation guide for developers, acquirers and independent evaluators
  • ISO/IEC 25045:2010 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Evaluation module for recoverability
  • ISO/IEC 25051:2014 Software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing
  • ISO/IEC TR 25060:2010 Systems and software engineering - Systems and software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability: General framework for usability-related information
  • ISO/IEC 25062:2006 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability test reports
  • ISO/IEC 25063:2014 Systems and software engineering - Systems and software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability: Context of use description
  • ISO/IEC 25064:2013 Systems and software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability: User needs report
  • ISO/IEC 25066:2016 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for Usability—Evaluation Report
  • ISO/TR 25100:2012 Intelligent transport systems – Systems architecture – Harmonization of ITS data concepts
  • ISO/TR 25102:2008 Intelligent transport systems – System architecture – 'Use Case' pro-forma template
  • ISO/TR 25104:2008 Intelligent transport systems – System architecture, taxonomy, terminology and data modelling – Training requirements for ITS architecture
  • ISO/TS 25110:2017 Electronic fee collection – Interface definition for on-board account using integrated circuit card (ICC)
  • ISO 25111:2009 Intelligent transport systems – Communications access for land mobiles (CALM) – General requirements for using public networks
  • ISO 25112:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – Mobile wireless broadband using IEEE 802.16
  • ISO 25113:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – Mobile wireless broadband using HC-SDMA
  • ISO/TS 25114:2010 Intelligent transport systems – Probe data reporting management (PDRM)
  • ISO 25119 Tractors and machinery for agriculture and forestry – Safety-related parts of control systems
    • ISO 25119-1:2010 Part 1: General principles for design and development
    • ISO 25119-2:2010 Part 2: Concept phase
    • ISO 25119-3:2010 Part 3: Series development, hardware and software
    • ISO 25119-4:2010 Part 4: Production, operation, modification and supporting processes
  • ISO 25178 Geometrical product specifications (GPS) – Surface texture: Areal
  • ISO/IEC 25185 Identification cards – Integrated circuit card authentication protocols
    • ISO/IEC 25185-1:2016 Part 1: Protocol for Lightweight
  • ISO 25237:2017 Health informatics – Pseudonymization
  • ISO/TS 25237:2008 Health informatics – Pseudonymization
  • ISO 25239 Friction stir welding - Aluminium
    • ISO 25239-1:2011 Part 1: Vocabulary
  • ISO/TR 25257:2009 Health informatics – Business requirements for an international coding system for medicinal products
  • ISO/TS 25377:2007 Hydrometric uncertainty guidance (HUG)
  • ISO 25378:2011 Geometrical product specifications (GPS) - Characteristics and conditions - Definitions
  • ISO/TR 25417:2007 Acoustics – Definitions of basic quantities and terms
  • ISO/IEC 25434:2008 Information technology - Data interchange on 120 mm and 80 mm optical disk using +R DL format - Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recording speed up to 16X)
  • ISO/IEC 25435:2006 Data Interchange on 60 mm Read-Only ODC - Capacity: 1,8 Gbytes (UMDTM)
  • ISO/IEC 25436:2006 Information technology - Eiffel: Analysis, Design and Programming Language
  • ISO/IEC 25437:2012 Information technology – Telecommunications and information exchange between systems – WS-Session – Web services for application session services
  • ISO/IEC TR 25438:2006 Information technology - Common Language Infrastructure (CLI) - Technical Report: Common Generics
  • ISO 25539 Cardiovascular implants - Endovascular devices
    • ISO 25539-1:2017 Part 1: Endovascular prostheses
    • ISO 25539-2:2012 Part 2: Vascular stents
    • ISO 25539-3:2011 Part 3: Vena cava filters
  • ISO 25577:2013 Information and documentation - MarcXchange
  • ISO 25639 Exhibitions, shows, fairs and conventions
    • ISO 25639-1:2008 Part 1: Vocabulary
    • ISO 25639-2:2008 Part 2: Measurement procedures for statistical purposes
  • ISO/TR 25679:2005 Mechanical testing of metals – Symbols and definitions in published standards
  • ISO 25720:2009 Health informatics – Genomic Sequence Variation Markup Language (GSVML)
  • ISO/TR 25901 Welding and allied processes - Vocabulary
    • ISO/TR 25901-1:2016 Part 1: General terms
    • ISO/TR 25901-3:2016 Part 3: Welding processes
    • ISO/TR 25901-4:2016 Part 4: Arc welding
  • ISO 25947 Fireworks – Categories 1, 2 and 3
    • ISO 25947-1:2017 Part 1: Terminology
  • ISO 25964 Information and documentation - Thesauri and interoperability with other vocabularies

ISO 26000 – ISO 26999

  • ISO 26000:2010 Guidance on social responsibility
  • ISO 26101:2017 Acoustics – Test methods for the qualification of free-field environments
  • ISO/TR 26122:2008 Information and documentation - Work process analysis for records
  • ISO 26162:2012 Systems to manage terminology, knowledge and content - Design, implementation and maintenance of terminology management systems
  • ISO 26243:2007 Cards for staple fibres spinning – Vocabulary and principles of construction
  • ISO 26261 Fireworks – Category 4
    • ISO 26261-1:2017 Part 1: Terminology
  • ISO 26262 Road Vehicles - Functional Safety
  • ISO/IEC 26300:2006 Information technology – Open Document Format for Office Applications (OpenDocument) v1.0
  • ISO 26324:2012 Information and documentation - Digital object identifier system
  • ISO 26362:2009 Access panels in market, opinion and social research - Vocabulary and service requirements
  • ISO 26428 Digital cinema (D-cinema) distribution master
    • ISO 26428-1:2008 Part 1: Image characteristics
    • ISO 26428-2:2008 Part 2: Audio characteristics
    • ISO 26428-3:2008 Part 3: Audio channel mapping and channel labeling
    • ISO 26428-9:2009 Part 9: Image pixel structure level 3 - Serial digital interface signal formatting
    • ISO 26428-11:2011 Part 11: Additional frame rates
    • ISO 26428-19:2011 Part 19: Serial digital interface signal formatting for additional frame rates level AFR2 and level AFR4
  • ISO 26429 Digital cinema (D-cinema) packaging
    • ISO 26429-3:2008 Part 3: Sound and picture track file
    • ISO 26429-4:2008 Part 4: MXF JPEG 2000 application
    • ISO 26429-6:2008 Part 6: MXF track file essence encryption
    • ISO 26429-7:2008 Part 7: Composition playlist
    • ISO 26429-8:2009 Part 8: Packing list
    • ISO 26429-9:2009 Part 9: Asset mapping and file segmentation
    • ISO 26429-10:2009 Part 10: Stereoscopic picture track file
  • ISO 26430 Digital cinema (D-cinema) operations
    • ISO 26430-1:2008 Part 1: Key delivery message
    • ISO 26430-2:2008 Part 2: Digital certificate
    • ISO 26430-3:2008 Part 3: Generic extra-theater message format
    • ISO 26430-4:2009 Part 4: Log record format specification
    • ISO 26430-5:2009 Part 5: Security log event class and constraints
    • ISO 26430-6:2009 Part 6: Auditorium security messages for intra-theater communications
    • ISO 26430-9:2009 Part 9: Key delivery bundle
  • ISO 26433:2009 Digital cinema (D-cinema) - XML data types
  • ISO/IEC/IEEE 26511:2011 Systems and software engineering - Requirements for managers of user documentation
  • ISO/IEC/IEEE 26512:2011 Systems and software engineering - Requirements for acquirers and suppliers of user documentation
  • ISO/IEC 26513:2009 Systems and software engineering - Requirements for testers and reviewers of user documentation
  • ISO/IEC 26514:2008 Systems and software engineering - Requirements for designers and developers of user documentation
  • ISO/IEC/IEEE 26515:2011 Systems and software engineering - Developing user documentation in an agile environment
  • ISO/IEC/IEEE 26531:2015 Systems and software engineering - Content management for product life-cycle, user and service management documentation
  • ISO/IEC 26550:2015 Software and systems engineering - Reference model for product line engineering and management
  • ISO/IEC 26551:2016 Software and systems engineering - Tools and methods for product line requirements engineering
  • ISO/IEC 26555:2015 Software and systems engineering - Tools and methods for product line technical management
  • ISO/IEC 26557:2016 Software and systems engineering - Methods and tools for variability mechanisms in software and systems product line
  • ISO/IEC 26558:2017 Software and systems engineering - Methods and tools for variability modelling in software and systems product line
  • ISO/IEC 26559:2017 Software and systems engineering - Methods and tools for variability traceability in software and systems product line
  • ISO 26683 Intelligent transport systems – Freight land conveyance content identification and communication
    • ISO 26683-1:2013 Part 1: Context, architecture and referenced standards
    • ISO 26683-2:2013 Part 2: Application interface profiles
  • ISO 26684:2015 Intelligent transport systems (ITS) – Cooperative intersection signal information and violation warning systems (CIWS) – Performance requirements and test procedures
  • ISO 26722:2014 Water treatment equipment for haemodialysis applications and related therapies
  • ISO 26782:2009 Anaesthetic and respiratory equipment – Spirometers intended for the measurement of time forced expired volumes in humans
  • ISO 26800:2011 Ergonomics - General approach, principles and concepts
  • ISO 26824:2013 Particle characterization of particulate systems - Vocabulary
  • ISO 26825:2008 Anaesthetic and respiratory equipment – User-applied labels for syringes containing drugs used during anaesthesia – Colours, design and performance
  • ISO/IEC TR 26905:2006 Information technology – Telecommunications and information exchange between systems – Enterprise Communication in Next Generation Corporate Networks (NGCN) involving Public Next Generation Networks (NGN)
  • ISO 26906:2015 Hydrometry – Fishpasses at flow measurement structures
  • ISO/IEC 26907:2009 Information technology – Telecommunications and information exchange between systems – High-rate ultra-wideband PHY and MAC standard
  • ISO/IEC 26908:2009 Information technology – Telecommunications and information exchange between systems – MAC-PHY interface for ISO/IEC 26907
  • ISO 26909:2009 Springs - Vocabulary
  • ISO/IEC 26925:2009 Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW HS format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed 8X)
  • ISO/IEC TR 26927:2011 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Mobility for enterprise communications
  • ISO/TR 26999:2012 Intelligent transport systems – Systems architecture – Use of process-oriented methodology in ITS International Standards and other deliverables

ISO 27000 – ISO 27999

  • ISO/IEC 27000:2016 Information technology – Security techniques – Information security management systems – Overview and vocabulary
  • ISO/IEC 27001:2013 Information technology – Security techniques – Information security management systems – Requirements
  • ISO/IEC 27002:2013 Information technology – Security techniques – Code of practice for information security controls
  • ISO/IEC 27003:2017 Information technology – Security techniques – Information security management systems – Guidance
  • ISO/IEC 27004:2016 Information technology – Security techniques – Information security management – Monitoring, measurement, analysis and evaluation
  • ISO/IEC 27005:2011 Information technology – Security techniques – Information security risk management
  • ISO/IEC 27006:2015 Information technology – Security techniques – Requirements for bodies providing audit and certification of information security management systems
  • ISO/IEC 27007:2017 Information technology – Security techniques – Guidelines for information security management systems auditing
  • ISO/IEC TR 27008:2011 Information technology – Security techniques – Guidelines for auditors on information security controls
  • ISO/IEC 27009:2016 Information technology – Security techniques – Sector-specific application of ISO/IEC 27001 – Requirements
  • ISO/IEC 27010:2015 Information technology – Security techniques – Information security management for inter-sector and inter-organizational communications
  • ISO/IEC 27011:2016 Information technology – Security techniques – Code of practice for Information security controls based on ISO/IEC 27002 for telecommunications organizations
  • ISO/IEC 27013:2015 Information technology - Security techniques - Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1
  • ISO/IEC 27014:2013 Information technology - Security techniques - Governance of information security
  • ISO/IEC TR 27016:2014 Information technology - Security techniques - Information security management - Organizational economics
  • ISO/IEC 27017:2015 Information technology - Security techniques - Code of practice for information security controls based on ISO/IEC 27002 for cloud services
  • ISO/IEC 27018:2014 Information technology - Security techniques - Code of practice for protection of personally identifiable information (PII) in public clouds acting as PII processors
  • ISO/IEC TR 27019:2013 Information technology - Security techniques - Information security management guidelines based on ISO/IEC 27002 for process control systems specific to the energy utility industry
  • ISO/IEC TR 27023:2015 Information technology - Security techniques - Mapping the revised editions of ISO/IEC 27001 and ISO/IEC 27002
  • ISO/IEC 27031:2011 Information technology - Security techniques - Guidelines for information and communication technology readiness for business continuity
  • ISO/IEC 27032:2012 Information technology - Security techniques - Guidelines for cybersecurity
  • ISO/IEC 27033 Information technology - Security techniques - Network security
    • ISO/IEC 27033-1:2015 Part 1: Overview and concepts
    • ISO/IEC 27033-2:2012 Part 2: Guidelines for the design and implementation of network security
    • ISO/IEC 27033-3:2010 Part 3: Reference networking scenarios - Threats, design techniques and control issues
    • ISO/IEC 27033-4:2014 Part 4: Securing communications between networks using security gateways
    • ISO/IEC 27033-5:2013 Part 5: Securing communications across networks using Virtual Private Networks (VPNs)
    • ISO/IEC 27033-6:2016 Part 6: Securing wireless IP network access
  • ISO/IEC 27034 Information technology - Security techniques - Application security
    • ISO/IEC 27034-1:2011 Part 1: Overview and concepts
    • ISO/IEC 27034-2:2015 Part 2: Organization normative framework
    • ISO/IEC 27034-6:2016 Part 6: Case studies
  • ISO/IEC 27035 Information technology - Security techniques - Information security incident management
    • ISO/IEC 27035-1:2016 Part 1: Principles of incident management
    • ISO/IEC 27035-2:2016 Part 2: Guidelines to plan and prepare for incident response
  • ISO/IEC 27036 Information technology - Security techniques - Information security for supplier relationships
    • ISO/IEC 27036-1:2014 Part 1: Overview and concepts
    • ISO/IEC 27036-2:2014 Part 2: Requirements
    • ISO/IEC 27036-3:2013 Part 3: Guidelines for information and communication technology supply chain security
    • ISO/IEC 27036-4:2016 Part 4: Guidelines for security of cloud services
  • ISO/IEC 27037:2012 Information technology – Security techniques – Guidelines for identification, collection, acquisition and preservation of digital evidence
  • ISO/IEC 27038:2014 Information technology - Security techniques - Specification for digital redaction
  • ISO/IEC 27039:2015 Information technology - Security techniques - Selection, deployment and operations of intrusion detection and prevention systems (IDPS)
  • ISO/IEC 27040:2015 Information technology - Security techniques - Storage security
  • ISO/IEC 27041:2015 Information technology - Security techniques - Guidance on assuring suitability and adequacy of incident investigative method
  • ISO/IEC 27042:2015 Information technology - Security techniques - Guidelines for the analysis and interpretation of digital evidence
  • ISO/IEC 27043:2015 Information technology - Security techniques - Incident investigation principles and processes
  • ISO/IEC 27050 Information technology - Security techniques - Electronic discovery
    • ISO/IEC 27050-1:2016 Part 1: Overview and concepts
  • ISO 27185:2012 Cardiac rhythm management devices - Symbols to be used with cardiac rhythm management device labels, and information to be supplied - General requirements
  • ISO 27186:2010 Active implantable medical devices – Four-pole connector system for implantable cardiac rhythm management devices – Dimensional and test requirements
  • ISO 27327 Fans – Air curtain units
    • ISO 27327-2:2014 Part 2: Laboratory methods of testing for sound power
  • ISO 27427:2013 Anaesthetic and respiratory equipment – Nebulizing systems and components
  • ISO/TS 27527:2010 Health informatics – Provider identification
  • ISO 27668 Gel ink ball pens and refills
    • ISO 27668-2:2009 Part 2: Documentary use (DOC)
  • ISO/TS 27687:2008 Nanotechnologies – Terminology and definitions for nano-objects – Nanoparticle, nanofibre and nanoplate [Withdrawn: replaced with ISO/TS 80004-2:2015]
  • ISO 27729:2012 Information and documentation - International standard name identifier (ISNI)
  • ISO 27730:2012 Information and documentation - International standard collection identifier (ISCI)
  • ISO 27789:2013 Health informatics – Audit trails for electronic health records
  • ISO/TS 27790:2009 Health informatics – Document registry framework
  • ISO 27799:2016 Health informatics—Information security management in health using ISO/IEC 27002
  • ISO/TR 27809:2007 Health informatics – Measures for ensuring patient safety of health software
  • ISO/HL7 27931:2009 Data Exchange Standards – Health Level Seven Version 2.5 – An application protocol for electronic data exchange in healthcare environments
  • ISO/HL7 27932:2009 Data Exchange Standards – HL7 Clinical Document Architecture, Release 2
  • ISO/HL7 27951:2009 Health informatics – Common terminology services, release 1
  • ISO/HL7 27953 Health informatics – Individual case safety reports (ICSRs) in pharmacovigilance
    • ISO/HL7 27953-1:2011 Part 1: Framework for adverse event reporting
    • ISO/HL7 27953-2:2011 Part 2: Human pharmaceutical reporting requirements for ICSR
  • ISO 27991:2008 Ships and marine technology - Marine evacuation systems - Means of communication

ISO 28000 – ISO 28999

  • ISO 28000:2007 Specification for security management systems for the supply chain
  • ISO 28001:2007 Security management systems for the supply chain – Best practices for implementing supply chain security, assessments and plans – Requirements and guidance
  • ISO 28002:2011 Security management systems for the supply chain – Development of resilience in the supply chain – Requirements with guidance for use
  • ISO 28003:2007 Security management systems for the supply chain – Requirements for bodies providing audit and certification of supply chain security management systems
  • Security management systems for the supply chain – Guidelines for the implementation of ISO 28000
    • ISO 28004-1:2007 Part 1: General principles
    • ISO 28004-2:2014 Part 2: Guidelines for adopting ISO 28000 for use in medium and small seaport operations
    • ISO 28004-3:2014 Part 3: Additional specific guidance for adopting ISO 28000 for use by medium and small businesses (other than marine ports)
    • ISO 28004-4:2014 Part 4: Additional specific guidance on implementing ISO 28000 if compliance with ISO 28001 is a management objective
  • ISO 28005 Security management systems for the supply chain – Electronic port clearance (EPC)
    • ISO 28005-1:2013 Part 1: Message structures
    • ISO 28005-2:2011 Part 2: Core data elements
  • ISO/PAS 28007:2012 Ships and marine technology—Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) [Withdrawn: replaced by ISO 28007-1:2015]
  • ISO 28007 Ships and marine technology - Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract)
    • ISO 28007-1:2015 Part 1: General
  • ISO/TS 28037:2010 Determination and use of straight-line calibration functions
  • ISO/CIE 28077:2016 Photocarcinogenesis action spectrum (non-melanoma skin cancers)
  • ISO/TR 28118:2009 Information and documentation - Performance indicators for national libraries
  • ISO 28178:2009 Graphic technology - Exchange format for colour and process control data using XML or ASCII text
  • ISO 28219:2009 Packaging - Labelling and direct product marking with linear bar code and two-dimensional symbols
  • ISO 28238:2010 Compression and injection moulds - Components for gating systems
  • ISO 28239:2008 Textile machinery – Opener and cleaner for staple fibres preparation – Vocabulary and principles of construction
  • ISO 28300:2008 Petroleum, petrochemical and natural gas industries – Venting of atmospheric and low-pressure storage tanks
  • ISO/IEC 28361:2007 Information technology – Telecommunications and information exchange between systems – Near Field Communication Wired Interface (NFC-WI)
  • ISO/TR 28380 Health informatics – IHE global standards adoption
    • ISO/TR 28380-1:2014 Part 1: Process
    • ISO/TR 28380-2:2014 Part 2: Integration and content profiles
    • ISO/TR 28380-3:2014 Part 3: Deployment
  • ISO 28401:2010 Light metals and their alloys – Titanium and titanium alloys – Classification and terminology
  • ISO 28500:2017 Information and documentation - WARC file format
  • ISO 28560 Information and documentation - RFID in libraries
    • ISO 28560-1:2014 Part 1: Data elements and general guidelines for implementation
    • ISO 28560-2:2014 Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962
    • ISO 28560-3:2014 Part 3: Fixed length encoding
    • ISO/TS 28560-4:2014 Part 4: Encoding of data elements based on rules from ISO/IEC 15962 in an RFID tag with partitioned memory
  • ISO 28564 Public information guidance systems
    • ISO 28564-1:2010 Part 1: Design principles and element requirements for location plans, maps and diagrams
    • ISO 28564-2:2016 Part 2: Guidelines for the design and use of location signs and direction signs
  • ISO 28620:2010 Medical devices – Non-electrically driven portable infusion devices
  • ISO 28640:2010 Random variate generation methods
  • ISO/TR 28682:2008 Intelligent transport systems – Joint APEC-ISO study of progress to develop and deploy ITS standards
  • ISO 28801:2011 Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
  • ISO 28902 Air quality – Environmental meteorology
    • ISO 28902-1:2012 Part 1: Ground-based remote sensing of visual range by lidar
    • ISO 28902-2:2017 Part 2: Ground-based remote sensing of wind by heterodyne pulsed Doppler lidar
  • ISO/TR 28980:2007 Ophthalmic optics – Spectacle lenses – Parameters affecting lens power measurement

ISO 29000 – ISO 29999

  • ISO/TS 29001:2010 Petroleum, petrochemical and natural gas industries – Sector-specific quality management systems – Requirements for product and service supply organizations
  • ISO/IEC 29100:2011 Information technology - Security techniques - Privacy framework
  • ISO/IEC 29101:2013 Information technology - Security techniques - Privacy architecture framework
  • ISO/IEC TR 29106:2007 Information technology - Generic cabling - Introduction to the MICE environmental classification
  • ISO/IEC TR 29107 Information technology - Intelligent homes - Taxonomy of specifications
    • ISO/IEC TR 29107-1:2010 Part 1: The scheme
  • ISO/IEC TR 29108:2013 Information technology - Terminology for intelligent homes
  • ISO/IEC 29109 Information technology – Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794
    • ISO/IEC 29109-1:2009 Part 1: Generalized conformance testing methodology
    • ISO/IEC 29109-2:2010 Part 2: Finger minutiae data
    • ISO/IEC 29109-4:2010 Part 4: Finger image data
    • ISO/IEC 29109-5:2014 Part 5: Face image data
    • ISO/IEC 29109-6:2011 Part 6: Iris image data
    • ISO/IEC 29109-7:2011 Part 7: Signature/sign time series data
    • ISO/IEC 29109-8:2011 Part 8: Finger pattern skeletal data
    • ISO/IEC 29109-9:2011 Part 9: Vascular image data
    • ISO/IEC 29109-10:2010 Part 10: Hand geometry silhouette data
  • ISO/IEC 29110 Systems and software engineering - Lifecycle profiles for Very Small Entities (VSEs)[Note 3]
    • ISO/IEC TR 29110-1:2016 Part 1: Overview
    • ISO/IEC 29110-2-1:2015 Part 2-1: Framework and taxonomy
    • ISO/IEC TR 29110-2-2:2016 Part 2-2: Guide for the development of domain-specific profiles
    • ISO/IEC TR 29110-3-1:2015 Part 3-1: Assessment guide
    • ISO/IEC 29110-3-3:2016 Part 3-3: Certification requirements for conformity assessments of VSE profiles using process assessment and maturity models
    • ISO/IEC TR 29110-3-4:2015 Part 3-4: Autonomy-based improvement method
    • ISO/IEC 29110-4-1:2011 Part 4-1: Profile specifications: Generic profile group
    • ISO/IEC TR 29110-5-1-1:2012 Part 5-1-1: Management and engineering guide: Generic profile group: Entry profile
    • ISO/IEC TR 29110-5-1-2:2011 Part 5-1-2: Management and engineering guide: Generic profile group: Basic profile
    • ISO/IEC TR 29110-5-1-3:2017 Part 5-1-3: Software engineering - Management and engineering guide: Generic profile group - Intermediate profile
    • ISO/IEC TR 29110-5-2-1:2016 Part 5-2-1: Organizational management guidelines
    • ISO/IEC TR 29110-5-6-1:2015 Part 5-6-1: Systems engineering - Management and engineering guide: Generic profile group: Entry profile
    • ISO/IEC TR 29110-5-6-2:2014 Part 5-6-2: Systems engineering - Management and engineering guide: Generic profile group: Basic profile
  • ISO/IEC TS 29113:2012 Information technology - Further interoperability of Fortran with C
  • ISO/IEC 29115:2013 Information technology - Security techniques - Entity authentication assurance framework
  • ISO/IEC 29119 Software and systems engineering – Software testing
  • ISO/IEC 29120 Information technology – Machine readable test data for biometric testing and reporting
    • ISO/IEC 29120-1:2015 Part 1: Test reports
  • ISO/IEC 29121:2013 Information technology - Digitally recorded media for information interchange and storage - Data migration method for DVD-R, DVD-RW, DVD-RAM, +R, and +RW disks
  • ISO/IEC TR 29123:2007 Identification Cards – Proximity Cards – Requirements for the enhancement of interoperability
  • ISO/IEC 29124:2010 Information technology - Programming languages, their environments and system software interfaces - Extensions to the C++ Library to support mathematical special functions
  • ISO/IEC TS 29125:2017 Information technology - Telecommunications cabling requirements for remote powering of terminal equipment
  • ISO/IEC TR 29127:2011 Information technology - System Process and Architecture for Multilingual Semantic Reverse Query Expansion
  • ISO/IEC 29128:2011 Information technology - Security techniques - Verification of cryptographic protocols
  • ISO/IEC 29133:2010 Information technology - Automatic identification and data capture techniques - Quality test specification for rewritable hybrid media data carriers
  • ISO/IEC 29134:2017 Information technology - Security techniques - Guidelines for privacy impact assessment
  • ISO/IEC 29136:2012 Information technology – User interfaces – Accessibility of personal computer hardware
  • ISO/IEC TR 29138 Information technology – Accessibility considerations for people with disabilities
    • ISO/IEC TR 29138-1:2009 Part 1: User needs summary
    • ISO/IEC TR 29138-2:2009 Part 2: Standards inventory
    • ISO/IEC TR 29138-3:2009 Part 3: Guidance on user needs mapping
  • ISO/IEC TS 29140 Information technology for learning, education and training - Nomadicity and mobile technologies
    • ISO/IEC TS 29140-1:2011 Part 1: Nomadicity reference model
    • ISO/IEC TS 29140-2:2011 Part 2: Learner information model for mobile learning
  • ISO/IEC 29141:2009 Information technology – Biometrics – Tenprint capture using biometric application programming interface (BioAPI)
  • ISO/IEC 29143:2011 Information technology - Automatic identification and data capture techniques - Air interface specification for Mobile RFID interrogators
  • ISO/IEC TR 29144:2014 Information technology – Biometrics – The use of biometric technology in commercial Identity Management applications and processes
  • ISO/IEC 29145 Information technology - Wireless Beacon-enabled Energy Efficient Mesh network (WiBEEM) for wireless home network services
    • ISO/IEC 29145-1:2014 Part 1: PHY Layer
    • ISO/IEC 29145-2:2014 Part 2: MAC Layer
    • ISO/IEC 29145-3:2014 Part 3: NWK Layer
  • ISO/IEC 29146:2016 Information technology - Security techniques - A framework for access management
  • ISO/IEC 29147:2014 Information technology - Security techniques - Vulnerability disclosure
  • ISO/IEC/IEEE 29148:2011 Systems and software engineering - Life cycle processes - Requirements engineering
  • ISO/IEC TR 29149:2012 Information technology - Security techniques - Best practices for the provision and use of time-stamping services
  • ISO/IEC 29150:2011 Information technology - Security techniques - Signcryption
  • ISO/IEC 29151:2017 Information technology - Security techniques - Code of practice for personally identifiable information protection
  • ISO/IEC TR 29154:2013 Software engineering - Guide for the application of ISO/IEC 24773:2008 (Certification of software engineering professionals - Comparison framework)
  • ISO/IEC 29155 Systems and software engineering - Information technology project performance benchmarking framework
    • ISO/IEC 29155-1:2011 Part 1: Concepts and definitions
    • ISO/IEC 29155-2:2013 Part 2: Requirements for benchmarking
    • ISO/IEC 29155-3:2015 Part 3: Guidance for reporting
    • ISO/IEC 29155-4:2016 Part 4: Guidance for data collection and maintenance
  • ISO/IEC TR 29156:2015 Information technology – Guidance for specifying performance requirements to meet security and usability needs in applications using biometrics
  • ISO/IEC 29157:2015 Information technology – Telecommunications and information exchange between systems – PHY/MAC specifications for short-range wireless low-rate applications in the ISM band
  • ISO/IEC TR 29158:2011 Information technology - Automatic identification and data capture techniques - Direct Part Mark (DPM) Quality Guideline
  • ISO/IEC 29159 Information technology – Biometric calibration, augmentation and fusion data
    • ISO/IEC 29159-1:2010 Part 1: Fusion information format
  • ISO/IEC 29160:2012 Information technology - Radio frequency identification for item management - RFID Emblem
  • ISO/IEC 29161:2016 Information technology - Data structure - Unique identification for the Internet of Things
  • ISO/IEC TR 29162:2012 Information technology - Guidelines for using data structures in AIDC media
  • ISO/IEC TR 29163 Information technology - Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition
    • ISO/IEC TR 29163-1:2009 Part 1: Overview Version 1.1
    • ISO/IEC TR 29163-2:2009 Part 2: Content Aggregation Model Version 1.1
    • ISO/IEC TR 29163-3:2009 Part 3: Run-Time Environment Version 1.1
    • ISO/IEC TR 29163-4:2009 Part 4: Sequencing and Navigation Version 1.1
  • ISO/IEC 29164:2011 Information technology – Biometrics – Embedded BioAPI
  • ISO/IEC TR 29166:2011 Information technology - Document description and processing languages - Guidelines for translation between ISO/IEC 26300 and ISO/IEC 29500 document formats
  • ISO/IEC 29167 Information technology - Automatic identification and data capture techniques
    • ISO/IEC 29167-1:2014 Part 1: Security services for RFID air interfaces
    • ISO/IEC 29167-10:2015 Part 10: Crypto suite AES-128 security services for air interface communications
    • ISO/IEC 29167-11:2014 Part 11: Crypto suite PRESENT-80 security services for air interface communications
    • ISO/IEC 29167-12:2015 Part 12: Crypto suite ECC-DH security services for air interface communications
    • ISO/IEC 29167-13:2015 Part 13: Crypto suite Grain-128A security services for air interface communications
    • ISO/IEC 29167-14:2015 Part 14: Crypto suite AES OFB security services for air interface communications
    • ISO/IEC 29167-16:2015 Part 16: Crypto suite ECDSA-ECDH security services for air interface communications
    • ISO/IEC 29167-17:2015 Part 17: Crypto suite cryptoGPS security services for air interface communications
    • ISO/IEC 29167-19:2016 Part 19: Crypto suite RAMON security services for air interface communications
  • ISO/IEC 29168 Information technology - Open systems interconnection
    • ISO/IEC 29168-1:2011 Part 1: Object identifier resolution system
    • ISO/IEC 29168-2:2011 Part 2: Procedures for the object identifier resolution system operational agency
  • ISO/IEC 29169:2016 Information technology - Process assessment - Application of conformity assessment methodology to the assessment to process quality characteristics and organizational maturity
  • ISO/IEC 29170 Information technology - Advanced image coding and evaluation
    • ISO/IEC 29170-2:2015 Part 2: Evaluation procedure for nearly lossless coding
  • ISO/IEC 29171:2009 Information technology - Digitally recorded media for information interchange and storage - Information Versatile Disk for Removable usage (iVDR) cartridge
  • ISO/IEC TR 29172:2011 Information technology - Mobile item identification and management - Reference architecture for Mobile AIDC services
  • ISO/IEC 29173 Information technology - Mobile item identification and management
    • ISO/IEC 29173-1:2012 Part 1: Mobile RFID interrogator device protocol for ISO/IEC 18000-63 Type C
  • ISO/IEC 29175:2012 Information technology - Mobile item identification and management - User data for Mobile AIDC services
  • ISO/IEC 29176:2011 Information technology - Mobile item identification and management - Consumer privacy-protection protocol for Mobile RFID services
  • ISO/IEC 29177:2016 Information technology - Automatic identification and data capture technique - Identifier resolution protocol for multimedia information access triggered by tag-based identification
  • ISO/IEC 29178:2012 Information technology - Mobile item identification and management - Service broker for Mobile AIDC services
  • ISO/IEC 29179:2012 Information technology - Mobile item identification and management - Mobile AIDC application programming interface
  • ISO/IEC 29180:2012 Information technology – Telecommunications and information exchange between systems – Security framework for ubiquitous sensor networks
  • ISO/IEC TR 29181 Information technology – Future Network – Problem statement and requirements
    • ISO/IEC TR 29181-1:2012 Part 1: Overall aspects
    • ISO/IEC TR 29181-2:2014 Part 2: Naming and addressing
    • ISO/IEC TR 29181-3:2013 Part 3: Switching and routing
    • ISO/IEC TR 29181-4:2013 Part 4: Mobility
    • ISO/IEC TR 29181-5:2014 Part 5: Security
    • ISO/IEC TR 29181-6:2013 Part 6: Media transport
    • ISO/IEC TR 29181-7:2013 Part 7: Service composition
    • ISO/IEC TR 29181-8:2017 Part 8: Quality of Service
    • ISO/IEC TR 29181-9:2017 Part 9: Networking of everything
  • ISO/IEC 29182 Information technology – Sensor networks: Sensor Network Reference Architecture (SNRA)
    • ISO/IEC 29182-1:2013 Part 1: General overview and requirements
    • ISO/IEC 29182-2:2013 Part 2: Vocabulary and terminology
    • ISO/IEC 29182-3:2014 Part 3: Reference architecture views
    • ISO/IEC 29182-4:2013 Part 4: Entity models
    • ISO/IEC 29182-5:2013 Part 5: Interface definitions
    • ISO/IEC 29182-6:2014 Part 6: Applications
    • ISO/IEC 29182-7:2015 Part 7: Interoperability guidelines
  • ISO/IEC 29187 Information technology - Identification of privacy protection requirements pertaining to learning, education and training (LET)
    • ISO/IEC 29187-1:2013 Part 1: Framework and reference model
  • ISO/IEC TR 29189:2015 Information technology – Biometrics – Evaluation of examiner assisted biometric applications
  • ISO/IEC 29190:2015 Information technology - Security techniques - Privacy capability assessment model
  • ISO/IEC 29191:2012 Information technology - Security techniques - Requirements for partially anonymous, partially unlinkable authentication.
  • ISO/IEC 29192 Information technology - Security techniques - Lightweight cryptography
    • ISO/IEC 29192-1:2012 Part 1: General
    • ISO/IEC 29192-2:2012 Part 2: Block ciphers
    • ISO/IEC 29192-3:2012 Part 3: Stream ciphers
    • ISO/IEC 29192-4:2013 Part 4: Mechanisms using asymmetric techniques
    • ISO/IEC 29192-5:2016 Part 5: Hash-functions
  • ISO/IEC TR 29194:2015 Information Technology – Biometrics – Guide on designing accessible and inclusive biometric systems
  • ISO/IEC TR 29195:2015 Traveller processes for biometric recognition in automated border control systems
  • ISO/IEC TR 29196:2015 Guidance for biometric enrolment
  • ISO/IEC 29197:2015 Information technology - Evaluation methodology for environmental influence in biometric system performance
  • ISO/IEC TR 29198:2013 Information technology – Biometrics – Characterization and measurement of difficulty for fingerprint databases for technology evaluation
  • ISO/IEC 29199 Information technology - JPEG XR image coding system
    • ISO/IEC TR 29199-1:2011 Part 1: System architecture
    • ISO/IEC 29199-2:2012 Part 2: Image coding specification
    • ISO/IEC 29199-3:2010 Part 3: Motion JPEG XR
    • ISO/IEC 29199-4:2010 Part 4: Conformance testing
    • ISO/IEC 29199-5:2012 Part 5: Reference software
  • ISO 29281 Intelligent transport systems – Communication access for land mobiles (CALM) – Non-IP networking
    • ISO 29281-1:2013 Part 1: Fast networking & transport layer protocol (FNTP)
    • ISO 29281-2:2013 Part 2: Legacy system support
  • ISO 29282:2011 Intelligent transport systems – Communications access for land mobiles (CALM) – Satellite networks
  • ISO 29283:2011 ITS CALM Mobile Wireless Broadband applications using Communications in accordance with IEEE 802.20
  • ISO/TS 29284:2012 Intelligent transport systems – Event-based probe vehicle data
  • ISO/IEC 29341 Information technology - UPnP Device Architecture
    • ISO/IEC 29341-1:2011 Part 1: UPnP Device Architecture Version 1.0
    • ISO/IEC 29341-1-1:2011 Part 1-1: UPnP Device Architecture Version 1.1
    • ISO/IEC 29341-1-2:2017 Part 1-2: UPnP Device Architecture Version 2.0
    • ISO/IEC 29341-2:2008 Part 2: Basic Device Control Protocol - Basic Device
    • ISO/IEC 29341-3-1:2011 Part 3-1: Audio Video Device Control Protocol - Audio Video Architecture
    • ISO/IEC 29341-3-2:2008 Part 3-2: Audio Video Device Control Protocol - Media Renderer Device
    • ISO/IEC 29341-3-3:2008 Part 3-3: Audio Video Device Control Protocol - Media Server Device
    • ISO/IEC 29341-3-10:2015 Part 3-10: Audio Video Device Control Protocol - Audio Video Transport Service
    • ISO/IEC 29341-3-11:2008 Part 3-11: Audio Video Device Control Protocol - Connection Manager Service
    • ISO/IEC 29341-3-12:2008 Part 3-12: Audio Video Device Control Protocol - Content Directory Service
    • ISO/IEC 29341-3-13:2008 Part 3-13: Audio Video Device Control Protocol - Rendering Control Service
    • ISO/IEC 29341-4-2:2011 Part 4-2: Audio Video Device Control Protocol - Level 2 - Media Renderer Device
    • ISO/IEC 29341-4-3:2008 Part 4-3: Audio Video Device Control Protocol - Level 2 - Media Server Device
    • ISO/IEC 29341-4-4:2011 Part 4-4: Audio Video Device Control Protocol - Level 2 - Audio Video Data Structures
    • ISO/IEC 29341-4-10:2011 Part 4-10: Audio Video Device Control Protocol - Level 2 - Audio Video Transport Service
    • ISO/IEC 29341-4-11:2011 Part 4-11: Audio Video Device Control Protocol - Level 2 - Connection Manager Service
    • ISO/IEC 29341-4-12:2008 Part 4-12: Audio Video Device Control Protocol - Level 2 - Content Directory Service
    • ISO/IEC 29341-4-13:2011 Part 4-13: Audio Video Device Control Protocol - Level 2 - Rendering Control Service
    • ISO/IEC 29341-4-14:2011 Part 4-14: Audio Video Device Control Protocol - Level 2 - Scheduled Recording Service
    • ISO/IEC 29341-5-1:2008 Part 5-1: Digital Security Camera Device Control Protocol - Digital Security Camera Device
    • ISO/IEC 29341-5-10:2008 Part 5-10: Digital Security Camera Device Control Protocol - Digital Security Camera Motion Image Service
    • ISO/IEC 29341-5-11:2008 Part 5-11: Digital Security Camera Device Control Protocol - Digital Security Camera Settings Service
    • ISO/IEC 29341-5-12:2008 Part 5-12: Digital Security Camera Device Control Protocol - Digital Security Camera Still Image Service
    • ISO/IEC 29341-6-1:2008 Part 6-1: Heating, Ventilation, and Air Conditioning Device Control Protocol - System Device
    • ISO/IEC 29341-6-2:2008 Part 6-2: Heating, Ventilation, and Air Conditioning Device Control Protocol - Zone Thermostat Device
    • ISO/IEC 29341-6-10:2008 Part 6-10: Heating, Ventilation, and Air Conditioning Device Control Protocol - Control Valve Service
    • ISO/IEC 29341-6-11:2008 Part 6-11: Heating, Ventilation, and Air Conditioning Device Control Protocol - Fan Operating Mode Service
    • ISO/IEC 29341-6-12:2008 Part 6-12: Heating, Ventilation, and Air Conditioning Device Control Protocol - Fan Speed Service
    • ISO/IEC 29341-6-13:2008 Part 6-13: Heating, Ventilation, and Air Conditioning Device Control Protocol - House Status Service
    • ISO/IEC 29341-6-14:2008 Part 6-14: Heating, Ventilation, and Air Conditioning Device Control Protocol - Setpoint Schedule Service
    • ISO/IEC 29341-6-15:2008 Part 6-15: Heating, Ventilation, and Air Conditioning Device Control Protocol - Temperature Sensor Service
    • ISO/IEC 29341-6-16:2008 Part 6-16: Heating, Ventilation, and Air Conditioning Device Control Protocol - Temperature Setpoint Service
    • ISO/IEC 29341-6-17:2008 Part 6-17: Heating, Ventilation, and Air Conditioning Device Control Protocol - User Operating Mode Service
    • ISO/IEC 29341-7-1:2008 Part 7-1: Lighting Device Control Protocol - Binary Light Device
    • ISO/IEC 29341-7-2:2008 Part 7-2: Lighting Device Control Protocol - Dimmable Light Device
    • ISO/IEC 29341-7-10:2008 Part 7-10: Lighting Device Control Protocol - Dimming Service
    • ISO/IEC 29341-7-11:2015 Part 7-11: Lighting Device Control Protocol - Switch Power Service
    • ISO/IEC 29341-8-1:2008 Part 8-1: Internet Gateway Device Control Protocol - Internet Gateway Device
    • ISO/IEC 29341-8-2:2008 Part 8-2: Internet Gateway Device Control Protocol - Local Area Network Device
    • ISO/IEC 29341-8-3:2008 Part 8-3: Internet Gateway Device Control Protocol - Wide Area Network Device
    • ISO/IEC 29341-8-4:2008 Part 8-4: Internet Gateway Device Control Protocol - Wide Area Network Connection Device
    • ISO/IEC 29341-8-5:2008 Part 8-5: Internet Gateway Device Control Protocol - Wireless Local Area Network Access Point Device
    • ISO/IEC 29341-8-10:2008 Part 8-10: Internet Gateway Device Control Protocol - Local Area Network Host Configuration Management Service
    • ISO/IEC 29341-8-11:2008 Part 8-11: Internet Gateway Device Control Protocol - Layer 3 Forwarding Service
    • ISO/IEC 29341-8-12:2008 Part 8-12: Internet Gateway Device Control Protocol - Link Authentication Service
    • ISO/IEC 29341-8-13:2008 Part 8-13: Internet Gateway Device Control Protocol - Radius Client Service
    • ISO/IEC 29341-8-14:2008 Part 8-14: Internet Gateway Device Control Protocol - Wide Area Network Cable Link Configuration Service
    • ISO/IEC 29341-8-15:2008 Part 8-15: Internet Gateway Device Control Protocol - Wide Area Network Common Interface Configuration Service
    • ISO/IEC 29341-8-16:2008 Part 8-16: Internet Gateway Device Control Protocol - Wide Area Network Digital Subscriber Line Configuration Service
    • ISO/IEC 29341-8-17:2008 Part 8-17: Internet Gateway Device Control Protocol - Wide Area Network Ethernet Link Configuration Service
    • ISO/IEC 29341-8-18:2008 Part 8-18: Internet Gateway Device Control Protocol - Wide Area Network Internet Protocol Connection Service
    • ISO/IEC 29341-8-19:2008 Part 8-19: Internet Gateway Device Control Protocol - Wide Area Network Plain Old Telephone Service Link Configuration Service
    • ISO/IEC 29341-8-20:2008 Part 8-20: Internet Gateway Device Control Protocol - Wide Area Network Point-to-Point Protocol Connection Service
    • ISO/IEC 29341-8-21:2008 Part 8-21: Internet Gateway Device Control Protocol - Wireless Local Area Network Configuration Service
    • ISO/IEC 29341-9-1:2008 Part 9-1: Imaging Device Control Protocol - Printer Device
    • ISO/IEC 29341-9-2:2008 Part 9-2: Imaging Device Control Protocol - Scanner
    • ISO/IEC 29341-9-10:2008 Part 9-10: Imaging Device Control Protocol - External Activity Service
    • ISO/IEC 29341-9-11:2008 Part 9-11: Imaging Device Control Protocol - Feeder Service
    • ISO/IEC 29341-9-12:2008 Part 9-12: Imaging Device Control Protocol - Print Basic Service
    • ISO/IEC 29341-9-13:2008 Part 9-13: Imaging Device Control Protocol - Scan Service
    • ISO/IEC 29341-10-1:2008 Part 10-1: Quality of Service Device Control Protocol - Quality of Service Architecture
    • ISO/IEC 29341-10-10:2008 Part 10-10: Quality of Service Device Control Protocol - Quality of Service Device
    • ISO/IEC 29341-10-11:2008 Part 10-11: Quality of Service Device Control Protocol - Quality of Service Manager Service
    • ISO/IEC 29341-10-12:2008 Part 10-12: Quality of Service Device Control Protocol - Quality of Service Policy Holder Service
    • ISO/IEC 29341-11-1:2008 Part 11-1: Quality of Service Device Control Protocol - Level 2 - Quality of Service Architecture
    • ISO/IEC 29341-11-2:2008 Part 11-2: Quality of Service Device Control Protocol - Level 2 - Quality of Service Schemas
    • ISO/IEC 29341-11-10:2008 Part 11-10: Quality of Service Device Control Protocol - Level 2 - Quality of Service Device Service
    • ISO/IEC 29341-11-11:2008 Part 11-11: Quality of Service Device Control Protocol - Level 2 - Quality of Service Manager Service
    • ISO/IEC 29341-11-12:2008 Part 11-12: Quality of Service Device Control Protocol - Level 2 - Quality of Service Policy Holder Service
    • ISO/IEC 29341-12-1:2015 Part 12-1: Remote User Interface Device Control Protocol - Remote User Interface Client Device
    • ISO/IEC 29341-12-2:2015 Part 12-2: Remote User Interface Device Control Protocol - Remote User Interface Server Device
    • ISO/IEC 29341-12-10:2015 Part 12-10: Remote User Interface Device Control Protocol - Remote User Interface Client Service
    • ISO/IEC 29341-12-11:2015 Part 12-11: Remote User Interface Device Control Protocol - Remote User Interface Server Service
    • ISO/IEC 29341-13-10:2008 Part 13-10: Device Security Device Control Protocol - Device Security Service
    • ISO/IEC 29341-13-11:2008 Part 13-11: Device Security Device Control Protocol - Security Console Service
    • ISO/IEC 29341-14-3:2011 Part 14-3: Audio Video Device Control Protocol - Level 3 - Media Server Device
    • ISO/IEC 29341-14-12:2011 Part 14-12: Audio Video Device Control Protocol - Level 3 - Audio Video Content Directory Service
    • ISO/IEC 29341-15-10:2011 Part 15-10: Content Synchronization Device Control Protocol - Content Synchronization Service
    • ISO/IEC 29341-16-1:2011 Part 16-1: Low Power Device Control Protocol - Low Power
    • ISO/IEC 29341-16-10:2011 Part 16-10: Low Power Device Control Protocol - Low Power Proxy Service
    • ISO/IEC 29341-16-11:2011 Part 16-11: Low Power Device Control Protocol - Low Power Service
    • ISO/IEC 29341-17-1:2011 Part 17-1: Quality of Service Device Control Protocol - Level 3 - Quality of Service Architecture
    • ISO/IEC 29341-17-10:2011 Part 17-10: Quality of Service Device Control Protocol - Level 3 - Quality of Service Device Service
    • ISO/IEC 29341-17-11:2011 Part 17-11: Quality of Service Device Control Protocol - Level 3 - Quality of Service Manager Service
    • ISO/IEC 29341-17-12:2011 Part 17-12: Quality of Service Device Control Protocol - Level 3 - Quality of Service Policy Holder Service
    • ISO/IEC 29341-17-13:2011 Part 17-13: Quality of Service Device Control Protocol - Level 3 - Quality of Service Device Service - Underlying Technology Interfaces
    • ISO/IEC 29341-18-1:2011 Part 18-1: Remote Access Device Control Protocol - Remote Access Architecture
    • ISO/IEC 29341-18-2:2011 Part 18-2: Remote Access Device Control Protocol - Remote Access Client Device
    • ISO/IEC 29341-18-3:2011 Part 18-3: Remote Access Device Control Protocol - Remote Access Server Device
    • ISO/IEC 29341-18-4:2011 Part 18-4: Remote Access Device Control Protocol - Remote Access Discovery Agent Device
    • ISO/IEC 29341-18-10:2011 Part 18-10: Remote Access Device Control Protocol - Remote Access Inbound Connection Configuration Service
    • ISO/IEC 29341-18-11:2011 Part 18-11: Remote Access Device Control Protocol - Remote Access Discovery Agent Service
    • ISO/IEC 29341-18-12:2011 Part 18-12: Remote Access Device Control Protocol - Remote Access Discovery Agent Synchronization Service
    • ISO/IEC 29341-18-13:2011 Part 18-13: Remote Access Device Control Protocol - Remote Access Transport Agent Configuration Service
    • ISO/IEC 29341-19-1:2011 Part 19-1: Solar Protection Blind Device Control Protocol - Solar Protection Blind Device
    • ISO/IEC 29341-19-10:2011 Part 19-10: Solar Protection Blind Device Control Protocol - Two Way Motion Motor Service
    • ISO/IEC 29341-30-1:2017 Part 30-1: IoT management and control device control protocol - IoT management and control architecture overview
    • ISO/IEC 29341-30-2:2017 Part 30-2: IoT management and control device control protocol - IoT management and control device
    • ISO/IEC 29341-30-10:2017 Part 30-10: IoT management and control device control protocol - Data store service
    • ISO/IEC 29341-30-11:2017 Part 30-11: IoT management and control device control protocol - IoT management and control data model service
    • ISO/IEC 29341-30-12:2017 Part 30-12: IoT management and control device control protocol - IoT management and control transport generic service
  • ISO/IEC 29361:2008 Information technology – Web Services InteroperabilityWS-I Basic Profile Version 1.1
  • ISO/IEC 29362:2008 Information technology – Web Services Interoperability – WS-I Attachments Profile Version 1.0
  • ISO/IEC 29363:2008 Information technology – Web Services Interoperability – WS-I Simple SOAP Binding Profile Version 1.0
  • ISO 29383:2010 Terminology policies - Development and implementation
  • ISO 29404:2015 Ships and marine technology - Offshore wind energy - Supply chain information flow
  • ISO 29461 Air intake filter systems for rotary machinery – Test methods
    • ISO 29461-1:2013 Part 1: Static filter elements
  • ISO 29464:2017 Cleaning of air and other gases – Terminology
  • ISO/IEC 29500 Information technology – Document description and processing languages – Office Open XML File Formats
    • ISO/IEC 29500-1:2016 Part 1: Fundamentals and Markup Language Reference
    • ISO/IEC 29500-2:2012 Part 2: Open Packaging Conventions
    • ISO/IEC 29500-3:2015 Part 3: Markup Compatibility and Extensibility
    • ISO/IEC 29500-4:2016 Part 4: Transitional Migration Features
  • ISO/TS 29585:2010 Health informatics – Deployment of a clinical data warehouse
  • ISO 29621:2017 Cosmetics – Microbiology – Guidelines for the risk assessment and identification of microbiologically low-risk products
  • ISO/IEC 29642:2009 Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW DL format - Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recording speed 2,4X)
  • ISO 29701:2010 Nanotechnologies – Endotoxin test on nanomaterial samples for in vitro systems – Limulus amebocyte lysate (LAL) test
  • ISO 29781:2008 Prostheses and orthoses – Factors to be included when describing physical activity of a person who has had a lower limb amputation(s) or who has a deficiency of a lower limb segment(s) present at birth
  • ISO 29782:2008 Prostheses and orthoses – Factors to be considered when specifying a prosthesis for a person who has had a lower limb amputation
  • ISO 29783 Prosthetics and orthotics - Vocabulary
    • ISO 29783-1:2008 Part 1: Normal gait
    • ISO 29783-2:2015 Part 2: Prosthetic gait
    • ISO 29783-3:2016 Part 3: Pathological gait (excluding prosthetic gait)
  • ISO/IEC 29794 Information technology – Biometric sample quality
    • ISO/IEC 29794-1:2016 Part 1: Framework
    • ISO/IEC 29794-4:2017 Part 4: Finger image data
    • ISO/IEC TR 29794-5:2010 Part 5: Face image data
    • ISO/IEC 29794-6:2015 Part 6: Iris image data
  • ISO 29821 Condition monitoring and diagnostics of machines – Ultrasound
    • ISO 29821-1:2011 Part 1: General guidelines
    • ISO 29821-2:2016 Part 2: Procedures and validation
  • ISO 29845:2011 Technical product documentation – Document types
  • ISO/IEC 29881:2010 Information technology - Systems and software engineering - FiSMA 1.1 functional size measurement method
  • ISO/TR 29901:2007 Selected illustrations of full factorial experiments with four factors
  • ISO 29990:2010 Learning services for non-formal education and training – Basic requirements for service providers
  • ISO 29991:2014 Language learning services outside formal education – Requirements
  • ISO 29993:2017 Learning services outside formal education – Service requirements

ISO 30000 – ISO 39999

  • ISO 30000:2009 Ships and marine technology – Ship recycling management systems – Specifications for management systems for safe and environmentally sound ship recycling facilities
  • ISO 30002:2012 Ships and marine technology - Ship recycling management systems - Guidelines for selection of ship recyclers (and pro forma contract)
  • ISO 30003:2009 Ships and marine technology - Ship recycling management systems - Requirements for bodies providing audit and certification of ship recycling management
  • ISO 30004:2012 Ships and marine technology - Ship recycling management systems - Guidelines for the implementation of ISO 30000
  • ISO 30005:2012 Ships and marine technology - Ship recycling management systems - Information control for hazardous materials in the manufacturing chain of shipbuilding and ship operations
  • ISO 30006:2010 Ship recycling management systems - Diagrams to show the location of hazardous materials onboard ships
  • ISO 30007:2010 Ships and marine technology - Measures to prevent asbestos emission and exposure during ship recycling
  • ISO 30042:2008 Systems to manage terminology, knowledge and content - TermBase eXchange (TBX)
  • ISO/IEC 30100 Information technology – Home network resource management
    • ISO/IEC 30100-1:2016 Part 1: Requirements
    • ISO/IEC 30100-2:2016 Part 2: Architecture
    • ISO/IEC 30100-3:2016 Part 3: Management application
  • ISO/IEC 30101:2014 Information technology – Sensor networks: Sensor network and its interfaces for smart grid system
  • ISO/IEC TR 30102:2012 Information technology - Distributed Application Platforms and Services (DAPS) - General technical principles of Service Oriented Architecture
  • ISO/IEC TS 30103:2015 Software and Systems Engineering - Lifecycle Processes - Framework for Product Quality Achievement
  • ISO/IEC TS 30104:2015 Information Technology - Security Techniques - Physical Security Attacks, Mitigation Techniques and Security Requirements
  • ISO/IEC 30105 Information technology - IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes
    • ISO/IEC 30105-1:2016 Part 1: Process reference model (PRM)
    • ISO/IEC 30105-2:2016 Part 2: Process assessment model (PAM)
    • ISO/IEC 30105-3:2016 Part 3: Measurement framework (MF) and organization maturity model (OMM)
    • ISO/IEC 30105-4:2016 Part 4: Terms and concepts
    • ISO/IEC 30105-5:2016 Part 5: Guidelines
  • ISO/IEC 30106 Information technology – Object oriented BioAPI
    • ISO/IEC 30106-1:2016 Part 1: Architecture
    • ISO/IEC 30106-2:2016 Part 2: Java implementation
    • ISO/IEC 30106-3:2016 Part 3: C# implementation
  • ISO/IEC 30107 Information technology – Biometric presentation attack detection
    • ISO/IEC 30107-1:2016 Part 1: Framework
    • ISO/IEC 30107-3:2017 Part 3: Testing and reporting
  • ISO/IEC 30108 Information technology – Biometric Identity Assurance Services
    • ISO/IEC 30108-1:2015 Part 1: BIAS services
  • ISO/IEC TR 30109:2015 Information technology – User interfaces – Worldwide availability of personalized computer environments
  • ISO/IEC TR 30110:2015 Information technology – Cross jurisdictional and societal aspects of implementation of biometric technologies – Biometrics and children
  • ISO/IEC 30111:2013 Information technology - Security techniques - Vulnerability handling processes
  • ISO/IEC TR 30112:2014 Information technology – Specification methods for cultural conventions
  • ISO/IEC 30113 Information technology – Gesture-based interfaces across devices and methods[Note 3]
    • ISO/IEC 30113-1:2015 Part 1: Framework
    • ISO/IEC 30113-11:2017 Part 11: Single-point gestures for common system
  • ISO/IEC TR 30114 Information technology - Extensions of Office Open XML file formats
    • ISO/IEC TR 30114-1:2016 Part 1: Guidelines
  • ISO/IEC 30116:2016 Information technology - Automatic identification and data capture techniques - Optical Character Recognition (OCR) quality testing
  • ISO/IEC TR 30117:2014 Information technology – Guide to on-card biometric comparison standards and applications
  • ISO/IEC 30121:2015 Information technology - Governance of digital forensic risk framework
  • ISO/IEC 30122 Information technology – User interfaces – Voice commands
    • ISO/IEC 30122-1:2016 Part 1: Framework and general guidance
    • ISO/IEC 30122-2:2017 Part 2: Constructing and testing
    • ISO/IEC 30122-3:2017 Part 3: Translation and localization
    • ISO/IEC 30122-4:2016 Part 4: Management of voice command registration
  • ISO/IEC TR 30125:2016 Information technology – Biometrics used with mobile devices
  • ISO/IEC 30128:2014 Information technology – Sensor networks – Generic Sensor Network Application Interface
  • ISO/IEC 30129:2015 Information technology - Telecommunications bonding networks for buildings and other structures
  • ISO/IEC 30130:2016 Software engineering - Capabilities of software testing tools
  • ISO/IEC TR 30132 Information technology - Information technology sustainability - Energy efficient computing models
    • ISO/IEC TR 30132-1:2016 Part 1: Guidelines for energy effectiveness evaluation
  • ISO/IEC 30134 Information technology - Data centres - Key performance indicators
    • ISO/IEC 30134-1:2016 Part 1: Overview and general requirements
    • ISO/IEC 30134-2:2016 Part 2: Power usage effectiveness (PUE)
    • ISO/IEC 30134-3:2016 Part 3: Renewable energy factor (REF)
  • ISO/IEC TS 30135 Information technology - Digital publishing - EPUB3
    • ISO/IEC TS 30135-1:2014 Part 1: EPUB3 Overview
    • ISO/IEC TS 30135-2:2014 Part 2: Publications
    • ISO/IEC TS 30135-3:2014 Part 3: Content Documents
    • ISO/IEC TS 30135-4:2014 Part 4: Open Container Format
    • ISO/IEC TS 30135-5:2014 Part 5: Media Overlay
    • ISO/IEC TS 30135-6:2014 Part 6: EPUB Canonical Fragment Identifier
    • ISO/IEC TS 30135-7:2014 Part 7: EPUB3 Fixed-Layout Documents
  • ISO/IEC 30170:2012 Information technology – Programming languages – Ruby
  • ISO/IEC 30182:2017 Smart city concept model - Guidance for establishing a model for data interoperability
  • ISO/IEC 30190:2016 Information technology - Digitally recorded media for information interchange and storage - 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Recordable disk
  • ISO/IEC 30191:2015 Information technology - Digitally recorded media for information interchange and storage - 120 mm Triple Layer (100,0 Gbytes single sided disk and 200,0 Gbytes double sided disk) and Quadruple Layer (128,0 Gbytes single sided disk) BD Recordable disk
  • ISO/IEC 30192:2016 Information technology - Digitally recorded media for information interchange and storage - 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Rewritable disk
  • ISO/IEC 30193:2016 Information technology - Digitally recorded media for information interchange and storage - 120 mm Triple Layer (100,0 Gbytes per disk) BD Rewritable disk
  • ISO 30300:2011 Information and documentation - Management systems for records - Fundamentals and vocabulary
  • ISO 30301:2011 Information and documentation - Management systems for records - Requirements
  • ISO 30302:2015 Information and documentation - Management systems for records - Guidelines for implementation
  • ISO 30400:2016 Human resource management - Vocabulary
  • ISO 30405:2016 Human resource management – Guidelines on recruitment
  • ISO/TR 30406:2017 Human resource management – Sustainable employability management for organizations
  • ISO/TS 30407:2017 Human resource management – Cost-Per-Hire
  • ISO 30408:2016 Human resource management – Guidelines on human governance
  • ISO 30409:2016 Human resource management – Workforce planning
  • ISO 31000:2009 Risk management – Principles and guidelines
  • ISO/TR 31004:2013 Risk management – Guidance for the implementation of ISO 31000
  • ISO/IEC 31010:2009 Risk management - Risk assessment techniques
  • ISO/IEC/IEEE 31320 Information technology - Modeling Languages
    • ISO/IEC/IEEE 31320-1:2012 Part 1: Syntax and Semantics for IDEF0
    • ISO/IEC/IEEE 31320-2:2012 Part 2: Syntax and Semantics for IDEF1X97 (IDEFobject)
  • ISO 32000 Document management – Portable document format
  • ISO/IEC 33001:2015 Information technology - Process assessment - Concepts and terminology
  • ISO/IEC 33002:2015 Information technology - Process assessment - Requirements for performing process assessment
  • ISO/IEC 33003:2015 Information technology - Process assessment - Requirements for process measurement frameworks
  • ISO/IEC 33004:2015 Information technology - Process assessment - Requirements for process reference, process assessment and maturity models
  • ISO/IEC TR 33014:2013 Information technology - Process assessment - Guide for process improvement
  • ISO/IEC 33020:2015 Information technology - Process assessment - Process measurement framework for assessment of process capability
  • ISO/IEC TS 33030:2017 Information technology - Process assessment - An exemplar documented assessment process
  • ISO/IEC TS 33052:2016 Information technology - Process reference model (PRM) for information security management
  • ISO/IEC 33063:2015 Information technology - Process assessment - Process assessment model for software testing
  • ISO/IEC 33071:2016 Information technology - Process assessment - An integrated process capability assessment model for Enterprise processes
  • ISO/IEC TS 33072:2016 Information technology - Process assessment - Process capability assessment model for information security management
  • ISO 37001:2016 Anti-bribery management systems
  • ISO 37120 Sustainable development of communities - Indicators for city services and quality of life
  • ISO/TR 37137:2014 Cardiovascular biological evaluation of medical devices – Guidance for absorbable implants
  • ISO 37500:2014 Guidance on outsourcing
  • ISO/IEC 38500:2015 Information technology - Governance of IT for the organization
  • ISO/IEC TS 38501:2015 Information technology - Governance of IT - Implementation guide
  • ISO/IEC TR 38502:2014 Information technology - Governance of IT - Framework and model
  • ISO/IEC TR 38504:2016 Governance of information technology - Guidance for principles-based standards in the governance of information technology
  • ISO/IEC 38505 Information technology - Governance of IT - Governance of data
    • ISO/IEC 38505-1:2017 Part 1: Application of ISO/IEC 38500 to the governance of data
  • ISO 39001:2012 Road traffic safety (RTS) management systems - Requirements with guidance for use

ISO 40000 – ISO 49999

  • ISO/IEC 40180:2017 Information technology – Quality for learning, education and training – Fundamentals and reference framework
  • ISO/IEC 40210:2011 Information technology - W3C SOAP Version 1.2 Part 1: Messaging Framework (Second Edition)
  • ISO/IEC 40220:2011 Information technology - W3C SOAP Version 1.2 Part 2: Adjuncts (Second Edition)
  • ISO/IEC 40230:2011 Information technology - W3C SOAP Message Transmission Optimization Mechanism
  • ISO/IEC 40240:2011 Information technology - W3C Web Services Addressing 1.0 - Core
  • ISO/IEC 40250:2011 Information technology - W3C Web Services Addressing 1.0 - SOAP Binding
  • ISO/IEC 40260:2011 Information technology - W3C Web Services Addressing 1.0 - Metadata
  • ISO/IEC 40270:2011 Information technology - W3C Web Services Policy 1.5 - Framework
  • ISO/IEC 40280:2011 Information technology - W3C Web Services Policy 1.5 - Attachment
  • ISO/IEC 40314:2016 Information technology - Mathematical Markup Language (MathML) Version 3.0 2nd Edition
  • ISO/IEC 40500:2012 Information technology – W3C Web Content Accessibility Guidelines (WCAG) 2.0
  • ISO 41011:2017 Facility management - Vocabulary
  • ISO 41012:2017 Facility management - Guidance on strategic sourcing and the development of agreements
  • ISO/TR 41013:2017 Facility management - Scope, key concepts and benefits
  • ISO/IEC 42010:2011 Systems and software engineering – Architecture description
  • ISO 44001:2017 Collaborative business relationship management systems — Requirements and framework
  • ISO/DIS 45001.2 Occupational health and safety management systems - Requirements with guidance for use [Under development]

ISO 50000 - ISO 59999

  • ISO 50001:2011 Energy management systems – Requirements with guidance for use
  • ISO 50002:2014 Energy audits – Requirements with guidance for use
  • ISO 50003:2014 Energy management systems – Requirements for bodies providing audit and certification of energy management systems
  • ISO 50004:2014 Energy management systems – Guidance for the implementation, maintenance and improvement of an energy management system
  • ISO 50006:2014 Energy management systems – Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI) – General principles and guidance
  • ISO 50015:2014 Energy management systems – Measurement and verification of energy performance of organizations—General principles and guidance
  • ISO 50047:2016 Energy savings – Determination of energy savings in organizations
  • ISO/ASTM 51026:2015 Practice for using the Fricke dosimetry system
  • ISO/ASTM 51205:2017 Practice for use of a ceric-cerous sulfate dosimetry system
  • ISO/ASTM 51261:2013 Practice for calibration of routine dosimetry systems for radiation processing
  • ISO/ASTM 51275:2013 Practice for use of a radiochromic film dosimetry system
  • ISO/ASTM 51276:2012 Practice for use of a polymethylmethacrylate dosimetry system
  • ISO/ASTM 51310:2004 Practice for use of a radiochromic optical waveguide dosimetry system
  • ISO/ASTM 51401:2013 Practice for use of a dichromate dosimetry system
  • ISO/ASTM 51431:2005 Practice for dosimetry in electron beam and X-ray (bremsstrahlung) irradiation facilities for food processing
  • ISO/ASTM 51538:2009 Practice for use of the ethanol-chlorobenzene dosimetry system
  • ISO/ASTM 51539:2013 Guide for use of radiation-sensitive indicators
  • ISO/ASTM 51540:2004 Practice for use of a radiochromic liquid dosimetry system
  • ISO/ASTM 51607:2013 Practice for use of the alanine-EPR dosimetry system
  • ISO/ASTM 51608:2015 Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at energies between 50 keV and 7.5 MeV
  • ISO/ASTM 51631:2013 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimetery system calibrations
  • ISO/ASTM 51649:2015 Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV
  • ISO/ASTM 51650:2013 Practice for use of a cellulose triacetate dosimetry system
  • ISO/ASTM 51702:2013 Practice for dosimetry in a gamma facility for radiation processing
  • ISO/ASTM 51707:2015 Guide for estimation of measurement uncertainty in dosimetry for radiation processing
  • ISO/ASTM 51818:2013 Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV
  • ISO/ASTM 51900:2009 Guide for dosimetry in radiation research on food and agricultural products
  • ISO/ASTM 51939:2017 Practice for blood irradiation dosimetry
  • ISO/ASTM 51940:2013 Guide for dosimetry for sterile insects release programs
  • ISO/ASTM 51956:2013 Practice for use of a thermoluminescence-dosimetry system (TLD system) for radiation processing
  • ISO/ASTM 52116:2013 Practice for dosimetry for a self-contained dry-storage gamma irradiator
  • ISO/ASTM 52303:2015 Guide for absorbed-dose mapping in radiation processing facilities
  • ISO/ASTM 52628:2013 Standard practice for dosimetry in radiation processing
  • ISO/ASTM 52701:2013 Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing
  • ISO/ASTM 52900:2015 Additive manufacturing - General principles - Terminology
  • ISO/ASTM 52915:2016 Specification for additive manufacturing file format (AMF) Version 1.2
  • ISO 55000:2014 Asset management – Overview, principles and terminology
  • ISO 55001:2014 Asset management – Management systems – Requirements
  • ISO 55002:2014 Asset management – Management systems – Guidelines for the application of ISO 55001

ISO 60000 - ISO 69999

  • ISO/IEC/IEEE 60559:2011 Information technology - Microprocessor Systems - Floating-Point arithmetic

ISO 80000 - ISO 89999

  • ISO/IEC 80000 Quantities and units
  • ISO/IEC 80001 Application of risk management for IT-networks incorporating medical devices
    • IEC 80001-1:2010 Part 1: Roles, responsibilities and activities
    • IEC/TR 80001-2-1:2012 Part 2-1: Step by Step Risk Management of Medical IT-Networks; Practical Applications and Examples
    • IEC/TR 80001-2-2:2012 Part 2-2: Guidance for the communication of medical device security needs, risks and controls
    • IEC/TR 80001-2-3:2012 Part 2-3: Guidance for wireless networks
    • IEC/TR 80001-2-4:2012 Part 2-4: General implementation guidance for Healthcare Delivery Organizations
    • IEC/TR 80001-2-5:2014 Part 2-5: Application guidance - Guidance for distributed alarm systems
    • ISO/TR 80001-2-6:2014 Part 2-6: Application guidance - Guidance for responsibility agreements
    • ISO/TR 80001-2-7:2015 Part 2-7: Guidance for healthcare delivery organizations (HDOs) on how to self-assess their conformance with IEC 80001-1
    • IEC/TR 80001-2-8:2016 Part 2-8: Application guidance - Guidance on standards for establishing the security capabilities identified in IEC 80001-2-2
    • IEC/TR 80001-2-9:2017 Part 2-9: Application guidance - Guidance for use of security assurance cases to demonstrate confidence in IEC/TR 80001-2-2 security capabilities
  • IEC/TR 80002 Medical device software
    • IEC/TR 80002-1:2009 Part 1: Guidance on the application of ISO 14971 to medical device software
    • ISO/TR 80002-2:2017 Part 2: Validation of software for medical device quality systems
    • IEC/TR 80002-3:2014 Part 3: Process reference model of medical device software life cycle processes (IEC 62304)
  • ISO/TS 80004 Nanotechnologies – Vocabulary
  • ISO/IEC/IEEE 80005 Utility connections in port
    • ISO/IEC/IEEE 80005-1:2012 Part 1: High Voltage Shore Connection (HVSC) Systems - General requirements
    • IEC/IEEE 80005-2:2016 Part 2: High and low voltage shore connection systems - Data communication for monitoring and control
    • IEC/PAS 80005-3:2014 Part 3: Low Voltage Shore Connection (LVSC) Systems - General requirements
  • ISO/IEC 80079 Explosive atmospheres
    • ISO/IEC 80079-20-2:2016 Part 20-2: Material characteristics - Combustible dusts test methods
    • ISO/IEC 80079-34:2011 Part 34: Application of quality systems for equipment manufacture
    • ISO 80079-36:2016 Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements
    • ISO 80079-37:2016 Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'', liquid immersion ''k''
    • ISO/IEC 80079-38:2016 Part 38: Equipment and components in explosive atmospheres in underground mines
  • ISO/IEC 80369 Small-bore connectors for liquids and gases in healthcare applications
    • ISO 80369-1:2010 Part 1: General requirements
    • ISO 80369-3:2016 Part 3: Connectors for enteral applications
    • IEC 80369-5:2016 Part 5: Connectors for limb cuff inflation applications
    • ISO 80369-6:2016 Part 6: Connectors for neuraxial applications
    • ISO 80369-7:2016 Part 7: Connectors for intravascular or hypodermic applications
    • ISO 80369-20:2015 Part 20: Common test methods
  • ISO/IEC 80416 Basic principles for graphical symbols for use on equipment
    • IEC 80416-1:2008 Part 1: Creation of graphical symbols for registration
    • ISO 80416-2:2001 Part 2: Form and use of arrows
    • IEC 80416-3:2002 Part 3: Guidelines for the application of graphical symbols
    • ISO 80416-4:2005 Part 4: Guidelines for the adaptation of graphical symbols for use on screens and displays (icons)
  • ISO/IEC 80601 Medical electrical equipment
    • ISO 80601-2-12:2011 Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
    • ISO 80601-2-13:2011 Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation
    • IEC 80601-2-30:2009 Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive sphygmomanometers
    • ISO 80601-2-55:2011 Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
    • ISO 80601-2-61:2011 Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
    • ISO 80601-2-67:2014 Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment
    • ISO 80601-2-69:2014 Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment
    • ISO 80601-2-70:2015 Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment
    • IEC 80601-2-71:2015 Part 2-71: Particular requirements for the basic safety and essential performance of functional Near-Infrared Spectroscopy (NIRS) equipment
    • ISO 80601-2-72:2015 Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
    • ISO 80601-2-74:2017 Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment
  • ISO 81060 Non-invasive sphygmomanometers
    • ISO 81060-1:2007 Part 1: Requirements and test methods for non-automated measurement type
    • ISO 81060-2:2013 Part 2: Clinical investigation of automated measurement type
  • ISO/IEC 81346 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations
    • IEC 81346-1:2009 Part 1: Basic rules
    • IEC 81346-2:2009 Part 2: Classification of objects and codes for classes
    • ISO/TS 81346-3:2012 Part 3: Application rules for a reference designation system
    • ISO/TS 81346-10:2015 Part 10: Power plants
  • ISO/IEC 81714 Design of graphical symbols for use in the technical documentation of products
    • ISO 81714-1:2010 Part 1: Basic rules
    • IEC 81714-2:2006 Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange
    • IEC 81714-3:2004 Part 3: Classification of connect nodes, networks and their encoding

ISO 90000 - ISO 99999

  • ISO/IEC 90003:2014 Software engineering - Guidelines for the application of ISO 9001:2008 to computer software
  • ISO/IEC TR 90005:2008 Systems engineering - Guidelines for the application of ISO 9001 to system life cycle processes
  • ISO/IEC TR 90006:2013 Information technology - Guidelines for the application of ISO 9001:2008 to IT service management and its integration with ISO/IEC 20000-1:2011

See also

Notes

  1. ^ This list generally excludes draft versions.
  2. ^ ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".
  3. ^ a b c d e f g h i j k l m n o p q r s t u v w x y z aa ab ac ad ae af ag ah ai aj ak al am an ao ap aq ar as at au av aw ax ay az ba bb bc bd be bf bg The exact wording of this title varies between parts. This is the wording of the most recently published part.

References

External links