SMART Consulting and Inspection

specializes in providing QA/QC inspection services to Oil&Gas, Petrochemical, Power Generation, Chemical Process and Telecommunication industry

About us

Our management team, with over 25 years of experience, will assess the individual requirements of our clients and assist them with finding practical and cost effective solutions that are in compliance with regulatory requirements.

Our commitment is to provide experienced, knowledgeable, certified and competent personnel that will deliver quality services to the customer.


We are familiar with
with manufacturing processes, codes and standards such as ISO-EN standards, ANSI, API, ASME, ASTM, ATEX, IECEx, Etc., NDT procedures and equipment, physical/chemical/mechanical properties testing, acceptance and performance testing.

Quality performance is one our cornerstones and is considered a personal responsibility of all employees. Dedicated to providing quality assurance and inspection services, tailored to meet the needs of our clients.

We deal with:

  • Third Party, Shop, Site, Pre-Shipment, Vendor, Goods and Industrial Inspector
  • Factory Acceptance Test
  • Inspection and Test Plan
  • Quality Control
  • Plant Inspector
  • Auditing and Expediting
  • ISO/Material Certification

Our inspectors specialize in:

  • Mechanical components and rules
  • NDT ( ISO 9712 OR ASNT-TC-1 PT, MT, RT, UT, VT, LT)
  • PMI
  • Welding
  • PED
  • Electrical & Instrumental
  • Telecommunications


SMART Consulting & ispection Srl offers a wide range of services covering all aspects of quality assurance. We can advise and guide you in:

  • Vendor assessment and pre-qualification for project procurement
  • Revision of engineering projects
  • Verification and design assessment
  • Audit and review technical documentation
  • Piping and machinery
  • Periodic inspection of lifting equipment
  • Process piping and inspection during periods of maintenance manual
  • Evaluation of corrosion and erosion.
  • Pre-shipment inspections
  • Aceptance Factory Test (FAT)
  • Quality control

Definitions (UNI CEI EN ISO/IEC 17020:2012)

Inspection: “examination of a product, process, service, or installation, or their design and determination of its conformity with specific requirements or, based on professional judgment, with general requirements.” The inspection of processes may include people, plants, technologies or methodologies. Procedures and inspection schemes may limit the inspection to an examination.

Process: “set of related tasks or interacting elements that transform incoming outgoing pieces.”

Product: “result of a process. Products are divided into four classes:

  • Service (for example transport)
  • Software
  • Hardware (for example the mechanical part of an engine)
  • Continuous process materials (e.g. lubricants) “

Service: “result of at least one activity necessarily performed at the interface between the supplier and the customer, which is generally intangible”

INSPECTION BODY: “body which performs inspections.”



Smart Consulting & Inspection Srl provides Industrial Inspection and Testing witnessing in many industrial components including pumps, compressors, valves, pressure vessels, boilers,  Electrical Equipments, UPS, Genset, Painting, coating etc.

Who benefits from the industrial inspection:

Our Inspection Services are directed to:

  • Equipment Purchasers
  • Equipment Vendors and Suppliers
  • Engineering companies and Procurement Personnel
  • Plant Owners or End Users
  • Quality Control Personnel
  • Third Party Inspectors
  • Product Consumers (air compressors, water pumps. solar equipment etc. )
  • Buyers and Sellers
  • Bankers Letter of Credit (LC) Personnel
  • Quality Engineers and In-Service Inspectors

Covered Equipment:

Our inspection service provide you invaluable information about technical requirements from the design stage to the manufacturing process, shipment, installation and operation.

We can assist you in following commodities:

Static Equipment:

Pressure vessels (Drums, Columns, Reactors, Filters, Strainers, Reformers), Water Tube Boilers, Fire Tube Boilers, Storage Tank, Process Piping Systems, Process Heaters, Shell and Tube Heat Exchangers, Fin Tube Heat Exchangers, Plate Heat Exchangers, Incinerators, Loading Arms, Expansion and Flexible Joints, Pig Launchers and Receivers, Linings, Rupture Disks, Safety and Relief Valves, Steam Traps, Flanges, Fittings, Line Pipes, Pipes, Bolts and Nuts, Gaskets, etc.

Rotating Equipment:

Boiler Feed water Pumps, Centrifugal Water Pumps, Cryogenic Submerged Pumps, Fire Fighting Pumps, Gear Pumps, Liquid Ring Vacuum Pumps, Metering Pumps, Proportioning Pumps, Reciprocating Pumps, Refinery Centrifugal Pumps, Rotary Pumps, Sea Water Lift Pumps, Submerged Pumps, Submersible Pumps, Vertical Pumps, Screw Pumps, Air Compressors, Centrifugal Compressors, Axial Compressors, Reciprocating Compressors, Diaphragm Compressors, Screw Compressors, Van Type Compressors, Belt Conveyors, Mixers, Diesel Engines, Fans, Blowers, Gas Turbines, Steam Turbines, Rotating Drum Screens, etc.

Electrical Equipment:

Bus Ducts, Induction Motors, Electric Generators, Diesel Generators, Gas Turbine Generators, Electric Motors, Power Transformers, Switchgears, Gas Circuit Breakers, Power Cables, Control Panels, Electrical Insulators, Conduit
and Fittings, Electrical Heat Tracings, Junction Boxes, Electrical Heaters, Plugs and Sockets, Uninterrupted Power Supplies, UPS Battery Chargers, UPS Batteries, etc.

Instrumental Equipment:

Control Valves, Breather Valves, Valve Actuators, Block Manifolds, On/Off Valves, Conductivity Meters, Control Panels, Density Transmitters, Emergency Vent Valves, Filter Regulators, Fire Detectors, Flame Detectors, Gas Detectors, Heat Detectors, Smoke Detectors, Flow Meters, Flow Switches, Sight Flow Indicators, Gas Analyzers, Hydrogen Process Analyzers, Hydrogen Sulfide Analyzers, Infrared Analyzers, Moisture Analyzers, Oxygen Analyzers, Instrument Cables, Instrument tubes and Fittings, Leak Detection Systems, Level Switches, Level Gauges, Level Transmitters, Limit Switches, Motor Operated Valves and Actuators, Manual Call Points, Needle Valves, Orifice Flanges and Plates, PH Meters, Pressure Gauges, Pressure Reducing Valves, Pressure Self Regulating Valves, Pressure Switches, Pressure Transmitters, Proximity Switches, Solenoid Valves, Temperature Gauges, Temperature Self Regulating Valves, Temperature Transmitters, Temperature Switches, Thermocouples, Thermowells, Thermometers, Venturi Tubes, etc.

Industrial Valves:

Ball Valves, Gate Valves, Glob Valves, Check Valves, Plug Valves, Pressure Safety Valves, Bronze Valves, Butterfly Valves, Catalyst Tight Valves, Choke Valves, Cryogenic Flanged Gate, Globe and Check Valves, Deluge Valves,
Double Block and Bleed Valves, Forged Gate, Globe and Check Valves, Gas Tight Valves, Large Cast Gate, Globe and Check Valves, Pressure and Safety Relief Valves, Slide and Sluice Valves, etc.

Skid-Mounted Units:

Water Treatment Units, Chemical Injection Packages, Desalination Plants, Dryer Packages, Ozone Water Treatment Packages, Refrigeration Packages, Diesel Generator Packages, Turbo Generator Packages, Turbo Compressor Packages, etc.